二氧化碳气体保护焊在厚板上的应用

板厚为 5 5mm的 16Mn钢采用CO2 半自动气保焊建造大型转炉炉体的可能性和可靠性如何 ?目前尚缺少足够的试验数据。为了给转炉工程的施工焊接提供可靠数据 ,确保焊接质量 ,对板厚 5 5mm16Mn钢CO2 半自动的焊接性能进行了一系列的试验研究     

电容传感器在使用中存在的几个问题及处理方法

随着电容测量技术的迅速发展，电容传感器在非电量测量和自动检测中得到广泛应用，但它在使用过程中也存在一些问题，针对在使用电容传感器过程中存在的几个问题，从电容传感器的原理和工作过程两个方面进行了讨论，并提出行之有效的处理方法。     

An analysis of shielding against DC magnetic fields generated by electric railways. Evaluation of effective permeability of fine structure

This paper describes an effective analysis of magnetic shielding based on homogenization. The analyses become time‐consuming if the problems include the magnetic substances having fine structure. The homogenization of the structure makes it possible to analyze effectively the magnetic fields. The authors introduce a method to estimate the effective permeability of the homogenized substance. This method can be applied to any periodic structure made of magnetic substance. The magnetic shielding effects by the structures against direct‐current (DC) fields generated by electric railways are analyzed by using the present method. As a result, it is found that the overhead way and the protective fence near the railway work as a magnetic shield, whose effects can be improved by appropriate arrangement of those constructions. © 2007 Wiley Periodicals, Inc. Electr Eng Jpn, 160(4): 7–15, 2007; Published online in Wiley InterScience ( www.interscience.wiley.com ). DOI 10.1002/eej.20310     

应用在地下工程施工中的新技术（Ⅱ）

为有效保护地面上的生态环境，开发利用地下空间资源并营建新世纪的地下水城，在新的21世纪里将会建造更多的地下工程以满足人们生产生活的各种需要。文中介绍了地下工程施工中采用的逆作法、盾构法、新奥法、沉管隧道、顶管工程和大型沉井施工新技术，供同行们参考应用。     

伪倾斜柔性掩护支架采煤工作面管理信息系统分析

应用管理信息系统的有关理论，对某急倾斜煤层矿井的141301工作面的生产情况进行了全面分析，并提出了改善工作面管理和提高效率的方向。     

Marmaray project: Tunnels and stations in BC contract

Istanbul is one of the most famous historical cities in the world. However, the project alignment selected as the best of a range of alignments cannot avoid passing beneath the historical and cultural heritages of Istanbul as well as under ancient and densely inhabited areas of the city. This paper will explain some of the challenges related to the bored tunnels.

Historical buildings are vulnerable. Yet many existing residential and office buildings are old and constructed on minimal foundations. As a consequence, it is vital that any drawdown of groundwater and any ground settlements have to be minimized.

In addition, the connection between the immersed and bored tunnels will be made directly and totally underground, without the usual intermediate shafts and beneath the deep waters of the Bosphorus Strait. This operation needs the utmost control of the tunnel excavation face to ensure its stability and to minimize water ingress. Based on such considerations, tunnel excavation by tunnel boring machine (TBM) using a slurry shield and having the ability to operate under high pore pressures was recommended as the method of excavation for the main running tunnels.

The paper will explain how the design team from Avrasyaconsult – the Employer’s Representative – arrived at the final minimum, specific and functional requirements of the bored tunneling works which are to be carried out using the ‘FIDIC EPC/Turnkey Project’ conditions.     

盾构管片衬砌吊装孔预埋件抗拔力试验初探

新版盾构法隧道施工及验收规范已于2017年7月实施,新规范中增加了对管片吊装孔预埋件“设计无要求时,抗拉拔力不应低于管片自重的7倍”的要求,对比之前常规5tf地铁管片设计采用的25tf,相当于提高了40%。文章依据管片预埋吊装孔抗拔力涉及的几种国家标准、行业规范,对几种抗拔试验进行了对比,参照ABAQUS有限元软件数值模拟法,论述了管片吊装孔预埋件抗拔力试验应注意的一些事项,为类似管片抗拔试验提供一些参考资料。     

P2成型机简介及Interbus-s总线故障分析

简要介绍了P2成型机各部分的结构组成及电控系统的组成、Interbus-s总线的结构特点。分析了Interbus-s总线上出现的故障情况，经排查及改进PLC程序排除了故障。     

EPB盾构掘进机刀具运动学建模分析

EPB盾构掘进机的刀盘上可根据切削土质的软硬而选择安装硬岩刀具和软土刀具。通过运用空间几何理论以及空间运动学的坐标变换矩阵法对刀盘上安装的正滚刀、边滚刀以及切刀的破岩过程进行分析,得出了刀具破岩的运动规律,建立了刀具工作刀刃的破岩运动学模型。模型的建立有利于对刀具进行磨损和破岩机理以及刀具优化设计的研究。     

盾构穿越沉降敏感区段的沉降监测及分析

在盾构穿越复合地层沉降敏感区段时,对该区段的施工沉降进行了严密观测,并对监测数据进行了全面分析,总结出上软下硬复合地层的沉降变形的一般规律.在工程实施中采取有针对性的沉降控制措施,确保敏感区段的沉降控制在允许范围之内.