Understanding silica-supported metal catalysts: Pd/silica as a case study

Supported metal catalysts, particularly noble metals supported on SiO₂, have attracted considerable attention due to the importance of the silica–metal interface in heterogeneous catalysis and in electronic device fabrication. Several important issues, e.g., the stability of the metal–oxide interface at working temperatures and pressures, are not well-understood. In this review, the present status of our understanding of the metal–silica interface is reviewed. Recent results of model studies in our laboratories on Pd/SiO₂/Mo(1 1 2) using LEED, AES and STM are reported. In this work, epitaxial, ultrathin, well-ordered SiO₂ films were grown on a Mo(1 1 2) substrate to circumvent complications that frequently arise from the silica–silicon interface present in silica thin films grown on silicon.     

纳米技术的研究现状与将来

纳米科学技术将成为２１世纪最重要的高技术之一。纳米技术的最终目标是直接操纵单个原子和分子，制造量子功能器件，从而开拓人类崭新的生产生活模式。文章评述利用电子束、离子束的精细技术和ＳＴＭ原子操纵技术的研究现状，介绍原子层蚀刻，单层抗蚀剂自形成蚀刻，纳米自然蚀刻和电子束全息纳米蚀刻等高技术前沿动态，展望纳米技术的发展前景。     

Surface structure of silver thin films on In2O3:Sn and Al2O 3 †

Surface structure of thin silver films (200 Å) on two technologically important films, indium tin oxide (ITO) and aluminium oxide, has been studied using scanning tunneling microscope. ITO films were prepared by reactive electron beam evaporation. Aluminium oxide films were prepared by oxidizing 2000 Å thick aluminium films evaporated on to H₂ terminated single crystal silicon substrates. The surface structure of silver on ITO and aluminium oxide appeared to be same and was characteristic of Stranski-Krastanov type. The observed asymmetry in the island shape was attributed to the anisotropic nature of the strain fields surrounding the nucleation centres.     

STM tunneling spectroscopy on high Tc superconductors

STM tunneling spectroscopy has been performed on the bulk single crystals of BiSrCaCuO (BSCCO) and the epitaxial thin films of YBaCuO (YBCO) at cryogenic temperatures. The STM images and tunneling spectra observed on the (001) surfaces can be classified into three cases; 1) Atomic image is visible. However, the tunneling spectrum shows semiconducting or smeared superconducting gap structures, depending on the tip-sample distance. 2) Clear atomic image can not be obtained. But, the tunneling spectrum shows flat bottom region with quite low zero bias conductance. 3) Tunneling spectra demonstrate gapless behavior, independent of the tip-sample separation. These observations support the quasi-2D electronic picture in whichs-wave like 2D superconducting layers are coupled with each other through the Josephson effect.     

基于ENC424J600的以太网与串行接口转换技术

论述了在STM32系列的MCU上移植TCP/IP协议栈LwIP,并利用新型以太网控制器ENC424J600实现网络数据传输功能。该系统主要完成的功能是接收上位机发送的数据,并将这些数据转换成通用串行接口输出。ENC424J600是Microchip新推出的一款以太网控制器,其速度优于ENC28J60,同时为用户提供两种接口模式。本文介绍了其基于SPI接口模式下的实现过程,详细描述了该网卡驱动的硬件电路和软件流程。     

MMA7361L的高精度角度检测平台设计

倾角是许多控制系统中需要测量的一个重要参数。针对倾角测量,设计了一种基于ARM微控制器和加速度传感器的角度测量平台。该平台采用基于ARMCortex—M3内核的STM32F103VE为数据处理的核心,利用高精度加速度传感器MMA7361L为测角传感器,同时配置液晶屏和小型键盘实现了人机交互。该平台具有测量精度高、灵敏度高、价格低的特点,应用前景广阔。     

舌控智能辅助系统的通信装置研究

为提高舌控智能辅助系统舌部运动信息的采集精度,利用STM32H743和LabVIEW设计了一种对舌机接口辅助系统进行信号采集、传输的通信装置.该装置通过舌部触碰嵌入式电极传感器发出信号并传输给单片机(进行舌控信号采集),然后通过串口传给上位机以此最终实现数据的采集与保存.实验结果表明,该装置可有效完成舌控智能辅助系统对控制信号的采集与传输,并具有实时显示、自动保存和查询历史数据等功能; 因此,该装置在舌控智能辅助系统的信号采集中具有良好的应用前景.     

Nanoscale Studies of the Early Stages of Oxidation of a TiAl-Base Alloy

The strategy to perform nanoscale studies of the initial stages of oxidation of TiAl involved first gaining some information on the electronic structure of pure TiO₂ surfaces and then on TiAl surfaces before and after oxidation both in low- and high-oxygen potentials. Both materials were studied in atomically-cleaned states generated by repeated sputtering and heating. It was found that the oxygen vacancies created additional defect states in the band gap of stoichiometric TiO₂. The results obtained on TiO₂ were used as fingerprints to study the oxide nucleation. The results on the initial stages of oxidation of TiAl confirm the nucleation of Ti₂O₃ islands of nanometer size and monolayer height in a low-oxygen-pressure environment, whilst a TiO₂ layer developed in an atmospheric environment. The ledges on atomically-cleaned surfaces usually acted as nucleation sites.     

超高密度磁记录的课题与展望

介绍了超高密度记录的研究开发状况 ,论述了垂直磁记录技术的课题以及采用TMR磁头的、记录密度为Subterabit in2 的记录 读出特性。作为高密度记录所必需的头 盘界面技术 ,提出了接触记录技术的课题 ,还就STM (Scanningtunnelingmicroscopy)存储器论述了未来超高密度技术     

Pd deposited on Cu(110): a highly performant catalyst for the 1,3-butadiene hydrogenation reaction

The catalytic properties, with respect to the 1,3-butadiene hydrogenation reaction, of strained Pd films on Cu(110) (lattice mismatch 8%) has been probed as a function of the film thickness. The characterization of the adlayer has been made by the combined use of STM with LEED and AES. For deposits below 10¹⁵ Pd/cm² (i.e., about 1 ML) the catalytic activity is near zero. This is the consequence of the formation of a Pd–Cu surface alloy with tendency for Cu to migrate/segregate to the surface. The catalytic activity suddenly increases to reach a maximum value for about 3 ML; the activity is then one order of magnitude higher than that of the pure Pd(110) surface. This is the consequence of the presence of a strained Pd overlayer, with Pd surface atoms having very unusual geometry, and hence very peculiar electronic and chemical properties. The catalytic activity then decreases as the Pd coverage is increased, and tends to values near that of the pure Pd(110). Gradual relaxation of the film geometry towards that of the normal fcc Pd structure probably exists.