Nonsensitiveness Regions for Threshold Ellipsoids

The problem is to determine nonsensitiveness regions for threshold ellipsoids within a regular mixed linear model.     

Nuclear Quadrupole Coupling Constants of Chlorine and Microwave Spectrum, Structure, and ab Initio Calculation of 1-Chloro-1,1,2-trifluoroethane

The microwave spectrum of the ³⁵Cl and ³⁷Cl isotopic species of 1-chloro-1,1,2-trifluoroethane (HCFC-133b) has been investigated in the frequency region 10 to 50 GHz using a Stark modulation microwave spectrometer. A pulsed jet Fourier transform microwave spectrometer was also used for the measurement of hyperfine splittings. A least-squares analysis of the observed b-type Q- and R-branch transition frequencies gave rotational and centrifugal distortion constants and components of the chlorine nuclear quadrupole coupling constant tensors in the principal axes system as follows: A=4625.161 (3) MHz, B=2004.127 (2) MHz, C=1875.813 (2) MHz, Δ_J=0.144 (9) kHz, Δ_JK=1.0748 (8) kHz, Δ_K=1.57 (1) kHz, δ_J=0.01376 (4) kHz, δ_K=−0.146 (4) kHz, χ_aa=−57.958 (10) MHz, χ_bb=21.231 (11) MHz, and χ_cc=36.727 (11) MHz for ³⁵ClCF₂CH₂F species, and A=4607.684 (6) MHz, B=1960.565 (2) MHz, C=1834.823 (2) MHz, Δ_J=0.106 (7) kHz, Δ_JK=1.022 (3) kHz, Δ_K=1.48 (1) kHz, δ_J=0.0142 (2) kHz, δ_K=−0.18 (2) kHz, χ_aa=−46.268 (11) MHz, χ_bb=17.319 (13) MHz, and χ_cc=28.950 (13) MHz for ³⁷ClCF₂CH₂F species. The structural parameters are calculated from the observed six rotational constants by assuming the partial structure of ab initio calculation. The electronic properties of the C-Cl bond are evaluated from the observed nuclear quadrupole constants of chlorine. These molecular properties are compared with those of other related molecules.     

贝克曼AllegraTM21R型超高速离心机故障排除一例

贝克曼Allegra^TM 21R型超高速离心机开机后，操作面板上出现错误代码“28”，离心机不旋转。离心机的电机采用无刷感应驱动，由电机驱动电源模块BSMl0GD60DN2驱动离心机的电机。故障是由于电源模块BSMl0GD60DN2损坏引起的。采用东芝三相桥式IGBT电源模块MG25Q6ES42代替BSMl0GD60DN2，并更换已烧毁的栅极电阻后。开机试验，仪器恢复正常。     

Efficient microwave induced direct α-halogenation of carbonyl compounds

A novel and direct method for the synthesis of α-halocarbonyl compounds using sequential treatment of carbonyl compounds with [hydroxy(tosyloxy)iodo]benzene followed by magnesium halides under solvent-free microwave irradiation conditions is described.     

The semi‐iterative method applied to the hyper‐power iteration

The semi‐iterative method (SIM) is applied to the hyper‐power (HP) iteration, and necessary and sufficient conditions are given for the convergence of the semi‐iterative–hyper‐power (SIM–HP) iteration. The root convergence rate is computed for both the HP and SIM–HP methods, and the quotient convergence rate is given for the HP iteration. Copyright © 2005 John Wiley & Sons, Ltd.     

A rigid subspace of the real line whose square is a homogeneous subspace of the plane

Working in ZFC, we give an example as indicated in the title.

     

Use of a range scaling method to determine alanine/water stopping power ratios

A phantom composed of alanine dosimeter material has been constructed and depth–dose measurements made in a 10 MeV electron beam. The results have demonstrated the feasibility of using relative depth–dose measurements to determine stopping power ratios in materials of dosimetric interest. Experimental stopping power ratios for alanine dosimeter material and water agreed with the data of ICRU Report 37 within the uncertainty of the experiment (±1.2% at a 95% confidence level).     

The exponential power law: partial wetting kinetics and dynamic contact angles

An equation for the kinetics of partial drop spreading is proposed. This equation was empirically derived from experimental data for the spreading kinetics of partially wetting liquids in terms of the wet area versus time. The equation has the form of an exponential power law (EPL), and transforms into the well-known power law for complete wetting, when the equilibrium contact angle approaches zero. The EPL fits very well available experimental data. To lend additional support to the validity of this generalized equation, it will be demonstrated that when it is transformed to present the dynamic contact angle (DCA), it fits very well DCA experimental data for other wetting processes, such as capillary flow and tape coating.     

用于激光推进的高功率激光器的选择

 从激光推进的要求出发，阐述了用于激光推进的高功率激光器的选择原则，即激光器必须满足：（1）高的平均功率和峰值功率；（2）高的单脉冲能量；（3）高的重复频率；（4）优良的大气传输特性。主要分析了目前YAG固体激光器、自由电子激光器和TEA脉冲CO₂激光器的特点，通过上述4个方面性能的比较，认为在目前水平下，TEA脉冲CO₂激光器是进行激光推进的首选强激光源，其优点表现在：功率可达10kW量级，单脉冲能量可达0.5~1kJ，重复频率为20~40Hz；激光波长处于大气传输窗口，对大气变化不敏感；工作物质快速流动，不存在热透镜效应和破坏阈值；相关光学元件易于制造；光束质量较好；运行成本低。     

Microwave-accelerated conjugate addition of aldehydes to α,β-unsaturated ketones

Aldehydes undergo smooth conjugate addition to α,β-unsaturated ketones in the presence of 5-(2-hydroxyethyl)-1,3-thiazolium halides and DBU adsorbed onto the surface of basic alumina under microwave irradiation and solvent-free conditions to afford 1,4-diketones in enhanced yields and reduced reaction times compared to conventional methods.