多孔板体结构足尺性能分析及材料基本要求

本文就利用诸如蛋白石这样的疏松多孔矿料同灰土构成的混合料，在路面结构中表现出的独特有效的抗冻作用机理作了深入分析，并结合足尺试验数据加以验证。阐述了所谓多孔板体结构的概念、机制和材料组成要求。     

Effects of poly(methyl methacrylate)‐based low‐profile additives on the properties of cured unsaturated polyester resins. II. Volume shrinkage characteristics and internal pigmentability

The effects of three series of self‐synthesized poly(methyl methacrylate) (PMMA)‐based low‐profile additives (LPAs), including PMMA, poly(methyl methacrylate‐co‐butyl acrylate), and poly(methyl methacrylate‐co‐butyl acrylate‐co‐maleic anhydride) with different chemical structures and MWs on the volume shrinkage characteristics and internal pigmentability for low‐shrink unsaturated polyester (UP) resins during curing were investigated by an integrated approach of static phase characteristics of the ternary styrene (ST)/UP/LPA system, reaction kinetics, cured‐sample morphology, microvoid formation, and property measurements. The relative volume fraction of microvoids generated during the cure was controlled by the stiffness of the UP resin used, the compatibility of the uncured ST/UP/LPA systems, and the glass‐transition temperature of the LPAs used. On the basis of the Takayanagi mechanical model, the LPA mechanism on volume shrinkage control, which accounted for phase separation and microvoid formation, and factors leading to both a good volume shrinkage control and acceptable internal pigmentability for the molded parts are discussed. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 91: 3388–3397, 2004     

Defect identification and sizing by the ultrasonic satellite-pulse technique

Shape and size are the most important defect characteristics that need to be determined for the reliable prediction of the remaining service lifetime of a defective structure or part. The analytical and supporting experimental results presented in this paper concern a general, pattern recognition-based, ultrasonic defect identification and sizing method. The satellite-pulse technique (SPT) is based on the interpretation, in terms of defect types (shapes) and dimensions, of the separation in time of arrival between the readily detected specularly reflected pulse and its generally ignored tip-diffracted or tangentially scattered satellite contained in the received waveform. Calibration procedures were also developed that enable the ultrasonic examiner to read the time scale of the oscilloscope for equivalent crack depth or void diameter as appropriate.     

Fracture mechanics of air-entrained concrete subjected to compression

Air voids are entrained in concrete for protection of constructed elements, especially highway pavements, against freeze-thaw damage. Entrained air void systems inadvertently reduce the compressive strength of the concrete. The present study describes development of an analytical model for evaluation of the effects of entrained air void system on the compressive strength of concrete. The model developed here will assist in predicting the compressive strength of concrete for specified mix designs. The constitutive relationships for air-entrained concrete were established by considering a micro cracked porous material with randomly distributed circular air voids and uniformly oriented cracks from the air voids. Linear elastic fracture mechanics was employed to explain the evolution of damage due to the individual voids and cracks that emanate from such voids. The damage model considers the interactions among the voids and cracks during various stages of loading. The analytical results from this study were evaluated through an experimental program for comparison of the computed and measured compressive strengths. A wide range of samples were examined that included concretes with air contents ranging from 2% to 13% air by volume of concrete. The experiments involved microscopic determination of air content and spacing factors as well as compressive strength tests for all the concrete samples.     

材料韧性断裂的细观力学分析与测试

应用细观力学的观点分析材料韧性断裂方面的独到之处及便利，并结合高强铸铁细观力学的断裂判据——临界空穴扩张比的测试研究，介绍了作者在应用细观力学研究高强铸铁韧性断裂方面所做的工作及进展     

Feature Activated Molecular Dynamics: Parallelization and Application to Systems with Globally Varying Mechanical Fields

A recently developed hybrid molecular dynamics method (Feature Activated Molecular Dynamics, or FAMD), which was originally designed to extend the scope of certain types of molecular dynamics simulations, is extended here in two ways. First, the method is modified to execute on parallel computer architectures using the MPI communication interface. The parallel FAMD algorithm is demonstrated to be computationally efficient and to substantially increase the length scales accessible with molecular dynamics. The performance of the parallel algorithm is demonstrated using a crystalline system containing 1× 10⁶ atoms, in which 1000 supersaturated self-interstitials are introduced and allowed to aggregate for about 4 ns. In the second part of this paper, the FAMD method is applied to problems in which spatio-temporally varying stress fields are present throughout the simulation cell. In particular, we consider the evolution of a spherical void in a hydrostatically stressed silicon crystal and show that the method can capture the extremely rapid void cavitation dynamics following material failure. Once again, the FAMD approach is demonstrated to provide substantial computational advantages over standard molecular dynamics.     

生物质复合材板坯内部孔隙形成的模拟与实验分析

应用计算机模拟的方法研究了生物质复合材板坯内部孔隙的形成.通过对板坯内孔隙体积比率与加工参数包括原料的几何形状、材料的公称密度之间的关系的考察结果表明,由模型得到的数据与由实验得到的数据的结果趋向一致.研究中通过在板材热压实验中测量板坯中心部位的温度和气体压力变化来说明孔隙对热和质传输的影响,实验和分析的结果也验证了该模型和模拟的方法对于研究生物质复合材板坯内孔隙具有一定的有效性.     

无铅时代的来临

介绍了铅的危害与焊接中的问题,希望能给一些同业者带来帮助。     

Elucidation of mean voidage in packed beds

Mean voidage is a global structural property of packed beds and its accurate prediction is therefore of great significance in any plug-flow type model. A general correlation has been developed which enables this parameter to be evaluated. The work reported here deals with mono-size non-porous spherical packing, but also tackles related issues such as size distribution and the way in which they influence the mean voidage. In addition, an attempt has been made to discuss the merits of alternative packing arrangements.     

内氧化对渗铝钢循环氧化性能的影响

通过循环氧化试验和SEM观察，研究了内氧化对扩散型热浸渗铝钢循环氧化性能的影响.结果表明，经高温扩散处理后，热浸镀铝钢扩散层的次外层和过渡层之间均有空洞产生.随扩散温度升高和时间延长，次外层和过渡层之间空洞逐步聚集连接成平行于表面的波浪线状空洞带，使高温氧化过程中扩散层产生了内氧化，氧化动力学曲线偏离平方抛物线规律而呈现抛物线—直线规律.因此，渗铝钢的长期氧化速度同时受扩散层内氧化和外氧化的控制.探讨了扩散层空洞带和内氧化的形成机理. 