Low Temperature Physics at the Laboratoire National des Champs Magnétiques Pulsés in Toulouse

An overview over past and present activities and future developments at the Toulouse pulsed magnetic field facility is given, both as far as technical developments of the infrastructure, as well as low temperature physics performed at the LNCMP are concerned.     

注射成形粘结NdFeB磁体:工艺·性能·应用

综合介绍了几种适于注射成形粘结NdFeB磁体的磁粉制备方法及特点；讨论了粘结剂、改性剂及磁场取向对注射成形NdFeB磁体最终磁性能的影响及其应用市场。在此基础上，指出了今后开展研究工作的方向。     

Effects of a Nd—Fe—B magnetic filler on the crystallization of poly(phenylene sulfide)

The crystallization of poly(phenylene sulfide) (PPS) in a polymer–magnetic Nd—Fe—B powder suspension was studied. Isothermal crystallization behavior was analyzed by way of differential scanning calorimetry, and the kinetics were described via the Avrami equation. The Avrami parameters and the crystallization times were strongly affected by both the particle size and the presence of a coupling agent coated on the filler particles. The small Nd—Fe—B particles exhibited long induction and half‐times, whereas the large particles tended to have short crystallization times. Particles ranging from 38 to 150 μ appeared to have similar crystallization times and to have no significant change in the value of Avrami index with melt crystallization temperature. As a result of these analyses, the dynamic mechanical properties were determined to correlate the fundamental polymer crystallization characteristics and the physical properties of the PPS binder. The enhancement of the wetting of the filler to the binder was promoted through the coupling agent, as confirmed by dynamic mechanical testing performed on the samples. The storage modulus typically decreased because of the presence of the uncoated small particles. Conversely, the loss modulus was enhanced because of the presence of the coated small particles in the PPS binder. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 83: 1091–1102, 2002     

Improvement of levitation characteristics in a magnetic bearing system using HTSC‐permanent magnet hybrid structure

Magnetic bearing using pinning force of a permanent magnet and a high‐temperature superconductor has been developed. Additional permanent magnet is introduced to increase the levitation force of the magnetic bearing. In this hybrid magnetic bearing system, levitation force is mainly given by the repulsive force of the permanent magnets, and stability for the lateral direction is given by pinning force of the superconductor. The experimental device is developed. A ring‐type superconductor and a bulk one are examined. Levitation characteristics of the hybrid magnetic bearing are measured. The bulk superconductor shows better characteristics of both levitation and lateral stability than the ring one. Levitation force of the hybrid system becomes about twice as large as that of the nonhybrid one. Although, the repulsive force of the permanent magnet decreases the lateral stability of the system, its influence becomes small by choosing an adequate position of the permanent magnets and the superconductor. © 2004 Wiley Periodicals, Inc. Electr Eng Jpn, 150(1): 71–77, 2005; Published online in Wiley InterScience ( www.interscience.wiley.com ). DOI 10.1002/eej.10350     

Performance prediction of a hybrid‐excitation synchronous machine with axially arranged excitation poles and permanent‐magnet poles

This paper presents a method of predicting the steady‐state performance of a new hybrid‐excitation synchronous machine (HESM) theoretically. The field pole of this HESM is axially divided into two parts; one is an excitation part and the other a permanent‐magnet (PM) part. A nonlinear equivalent circuit, which can include the saliency of the rotor and the magnetic saturation due to the iron core, is derived. Based on this equivalent circuit, the steady‐state performance of the HESM is calculated, and the results are confirmed through experiments. © 2004 Wiley Periodicals, Inc. Electr Eng Jpn, 150(2): 43–49, 2005; Published online in Wiley InterScience ( www.interscience.wiley.com ). DOI 10.1002/eej.20033     

Industrialization of High Performance Sintered NdFeB Magnets

Sintered Nd-Fe-B magnet was manufactured by advanced equipment via a SC (Strip casting) technology.It has integrative performance.     

应用10mm薄板铸锭制备的NdFeB烧结磁体

NdFeB薄板铸锭具有晶粒细，富钕相分布均匀及在稀土含量较低时可以防止α－Fe相出现的特点，是一种适合制备高性能烧磁体的合金铸锭，本文介绍了一种用10mm薄板铸锭和球磨制粉方法制备烧结磁体的工艺，在设备要求较低的情况下制备得到了Br=1.37T,(BH)max=320kJ/m^3(40MGOe)的烧结磁体，同时比较了使用常规铸锭和常规工艺的结果，强调了氢爆法在该工艺中的重要作用，最后对该工艺的改进方向和10mm铸锭的应用前景进行了阐述。     

盘式永磁无刷电动机设计中的一些问题

介绍了盘式永磁无刷电动机的原理和结构，探讨了其设计特点，解决了磁路分析计算和电机主要尺寸确定以及磁极形状选择的问题。     

Structure and Magnetic Properties of LaCo_(13-X)M_X Intermetallic Compounds

ＳｔｒｕｃｔｕｒｅａｎｄＭａｇｎｅｔｉｃＰｒｏｐｅｒｔｉｅｓｏｆＬａＣｏ＿（１３－Ｘ）Ｍ＿ＸＩｎｔｅｒｍｅｔａｌｌｉｃＣｏｍｐｏｕｎｄｓＷＵＪｉａｎＭｉｎ；ＬＩＦｅｎｇ；ＴＡＩＬｉＣｈｉａｎｄＺＨＥＭＧＱｕｎＳｔｒｕｃｔｕｒｅａｎｄＭａｇｎｅｔｉｃＰ...     

影响磁式TIMS测量准确度的主要因素

测量准确度是热电离质谱 ( TIMS)的重要指标 ,对于使用年限较长的 TIMS,造成准确度下降的因素很多 ,分析判断更复杂。为了准确、系统地了解其中的主要原因 ,本文从 TIMS的基本工作原理出发 ,对影响测量准确度的主要因素 ,如离子束的角分散、能量分散、电磁场稳定性、多接收器的形变和位移、电子倍增器的衰老和放大器增益的差异等及相应的解决办法作了较深入的探讨