Polyol-mediated synthesis of water-soluble LaF3:Yb,Er upconversion fluorescent nanocrystals

Well-crystallized LaF₃:Yb,Er nanoparticles were prepared by the polyol method and three kinds of polyols (glycol, diethylene glycol and glycerol) were chosen as the reaction medium respectively. All of the obtained LaF₃:Yb,Er nanoparticles have roughly spherical shapes, and the average sizes of these nanoparticles ranged from 5 to 7 nm. These nanoparticles could be well dispersed in water or ethanol to form colloidal solutions. When these nanoparticles were excited by the 980 nm laser, several upconversion emissions were observed.     

Ionoluminescence decay measured with single ions

A new ion beam analysis-based, single ion technique called the time to first photon has been developed to measure the decay of the luminescence signal of phosphors. Such measurements are currently needed to study luminescence decay mechanisms following high-density excitations and to identify strongly luminescent phosphor coatings with short lifetimes for ion photon emission microscopy (IPEM). The samples for this technique consist of thin phosphor layers placed or coated on the surface of PIN diodes. Single ions from an accelerator strike this sample and simultaneously create ion beam induced luminescence (IBIL) from the phosphor that is measured by a single-photon-detector, and an ion beam induced charge collection (IBICC) signal in the PIN diode. In this case, the IBICC signal provides the start pulse and the IBIL signal the stop pulse to a time to amplitude converter. It is straightforward to show that this approach also measures a signal proportional to activity versus time with an accuracy of 5% as long as the number of detected photons per ion is less than 0.1, which usually requires the use of absorbers for the IBIL detector or electronic discrimination for the IBIL signals. Details of the new analysis are given together with examples of luminescence decay measurements of several ceramic phosphors being considered to coat IPEM samples. IPEM is currently being developed at Sandia National Laboratory (SNL), the University of North Texas in Denton, and the Universities and INFN of Padova and Torino.     

Synthesis of Hexagonal‐Phase NaYF4:Yb,Er and NaYF4:Yb,Tm Nanocrystals with Efficient Up‐Conversion Fluorescence

IR‐to‐visible up‐conversion fluorescent nanocrystals of hexagonal‐phase NaYF₄:20 %Yb,2 %Er and NaYF₄:20 %Yb,2 %Tm have been synthesized by decomposition of multiprecursors of CF₃COONa, (CF₃COO)₃Y, (CF₃COO)₃Yb, and (CF₃COO)₃Er/(CF₃COO)₃Tm in oleylamine at 330 °C. The average particle size is 10.5 ± 0.7 nm (from random measurements of 200 particles from five transmission electron microscopy images) and 11.1 ± 1.3 nm (from dynamic‐light‐scattering measurements). The up‐conversion fluorescence intensity of the hexagonal nanocrystals in this work is much higher than that of other cubic‐phase NaYF₄:Yb,Er nanocrystals, including the ones in this work (by a factor of 7.5). Mechanisms for nucleation and growth of the hexagonal‐phase nanoparticles are proposed. These nanocrystals are easily dispersed in organic solvents, producing a transparent colloidal solution. The hydrophobic surfaces of the particles are made hydrophilic using a bipolar surfactant. These nanoparticles and their dispersions in various media have potential applications in optical nanodevices and bioprobes.     

Comparison of YAG: Eu phosphors synthesized by supercritical water in batch and continuous reactors

Luminescent yttrium aluminum garnet (YAG, Y₃Al₅O₁₂) nanoparticles doped with Eu (10 at%) were synthesized in batch-type and continuous-type supercritical water (SCW) reactors. In the case of the continuous-type SCW method, the particles of YAG: Eu phosphors were much smaller and demonstrated a uniform spherical-like shape. Inversely, in the case of the batch-type SCW method, a needle-like or elliptical-like shape was formed because a finite amount of time was required to reach SCW conditions from ambient conditions. However, the emission intensity of YAG: Eu phosphors synthesized by using the batch-type SCW method was stronger. Therefore, it is concluded that the continuous-type SCW method is superior to the batch-type SCW method from the viewpoint of the particle size and shape, but the luminescence property of phosphors in the continuous-type SCW method needs to be improved. In addition, a calcination process slightly improved the luminescence intensities of YAG: Eu phosphors generated by using either the batch-type or continuous-type SCW methods.     

SrTiO_3:Pr~(3+),Na~+体系荧光粉的合成与性能研究

采用高温固相法在还原气氛下制备了SrTiO3:Pr3+,Na+荧光粉。用X射线衍射分析测定了SrTiO3:Pr3+,Na+荧光粉的晶体结构,具体研究了激活剂Pr3+和助熔剂H3BO3的掺杂量对SrTiO3:Pr3+,Na+体系发光性能的影响。结果表明,SrTiO3:Pr3+,Na+荧光粉属于立方晶型;在Pr3+掺杂0.6%(与SrTiO3的摩尔比)和助熔剂H3BO3掺杂3%(与SrTiO3的摩尔比)时,此荧光粉的发光性能最佳。讨论了不同电荷补偿剂对SrTiO3:Pr3+体系激发光谱和发射光谱的影响,结果表明,Na+离子是制备Sr-TiO:Pr3+体系荧光粉的最佳电荷补偿剂。     

Energy transfer and luminescent properties of Tb3+ and Tb3+, Yb3+ doped CNGG phosphors

In this work,calcium niobium gallium garnet(Ca₃ Nb_1.6875Ga_3.1875O₁₂-CNGG) ceramic samples singledoped with Tb³⁺ and co-doped with Tb³⁺ and Yb³⁺ ions were sintered by the solid-state reaction method.The structural characterization of the samples was carried out by X-ray diffraction measurements.The optimal concentration of Tb³⁺ ions corresponding to the maximum luminescence in the green spectral range in CNGG:...     

Single-particle-diagnosis approach: An efficient strategy for discovering new nitride phosphors

Discovery of novel phosphors is extremely important to target the ever change of the solid state lighting technology. In this paper, we present a high-speed way to discover new phosphors, namely single-particle-diagnosis approach. This approach is based on investigating the crystal structure and luminescence of a tiny single crystal, without the necessity of the growth of large-size single crystals or the preparation of single phase powder samples. The concept of the approach and some new nitride phosphors explored by this approach are shown in this paper.     

Tunable light emission and similarities with garnet structure of Ce-doped LSCAS glass for white-light devices

In this paper, we report results concerning tunable light emission and color temperature in cerium-doped low-silica-calcium-alumino-silicate (LSCAS) glass for smart white-light devices. Spectroscopic results, analyzed using the CIE 1931 x-y chromatic diagram, show that this glass presents two broad emission bands centered at 475 and 540 nm, whose intensities can be tuned by the excitation wavelength. Moreover, the same emission can be achieved from a color temperature range from 3200 to 10,000 K, with a color-rendering index (CRI) of around 75% obtained by changing the optical path length of the sample. Our new phosphor LSCAS glass, which is a unique system that exhibits tunable yellow emission, combines all qualities for white-light devices.     

Rare earth (RE) doped phosphors and their emerging applications: A review

The evolution of luminescent materials has witnessed rapid advancement in research and development. Solid inorganic light-emitting materials or phosphors are the optoelectronic material of the 21st century because of their power-efficient potential over various illumination sources, eco-friendliness and resourceful display perspectives. The inorganic phosphors have been extensively explored to meet the demand of low voltage stimulated lighting sources owing to increased global energy consumption. Due to environmental friendliness, advantages long lifetime, lower energy consumption, reliability and high luminous efficiency, modern white light-emitting diodes (WLEDs) have replaced less effective incandescent and mercury-enclosing conventional fluorescent lighting sources. This review highlights the developments in preparation, luminescence and potential perceptions of rare-earth activated phosphors for solid-state lighting technologies. The role of RE ions as an activator as well as a sensitizer in doped materials and possible transitions within their energy levels are reviewed in detail. The paper reviews the substantial influence of host lattices such as aluminate, oxide, phosphate, silicate, sulfide, etc on the optical transitions of doped RE ions. Studies on the advancement into the design of novel phosphors are very crucial as they will provide an opportunity to boom prospects in the course of promising applications. The sustainable energy facilities include clean technologies providing a cheaper lighting source which can produce significant indirect economic benefits via limiting the deforestation and use of scrubbing technology to mitigate air pollution.     

Synthesis and luminescence properties of nitrided lanthanum magnesium hexaluminate LaMgAl11O19 phosphors

Nitrided LaMgAl₁₁O₁₉ phosphors were prepared by a two-step method involving synthesis at 1550 °C for 4 h, trituration, and firing at 1650 °C for 5 h under a nitrogen atmosphere. Nitrogen was doped into LaMgAl₁₁O₁₉ and bonded with aluminium atoms. The nitrided LaMgAl₁₁O₁₉ phosphors showed plate-like morphology with a rough surface and exhibited strong blue emission at 442 nm and 450 nm, which may be attributed to the energy transition between defect levels. A weak emission band at 590 nm was ascribed to the transition between the V_Al acceptor and the valence band, which was excited at 254 nm.