探讨电石法PVC烟气治理方法

分析了电石法PVC生产链中电石炉烟气及电厂烟气二氧化硫的排放情况,指出利用电石炉烟气中的CO合成氨、再将合成氨用于燃煤电厂烟气的"氨法"脱硫是具有较大应用潜力的循环经济产业链。     

Sequential batch reactor for eucalypt kraft pulp effluent treatment with Trametes versicolor

BACKGROUND: A sequential batch reactor (SBR) was used for eucalypt kraft pulp effluent treatment with Trametes versicolor. A 2³ full factorial design and response surface methodology were applied to optimise the batch fermentation conditions. Effluent concentration, culture medium and inoculum age were the factors selected for this study in order to optimise the reduction of chemical oxygen demand (COD). RESULTS: The presence of Trametes Defined Medium (TDM) in the fermentation was required to obtain a significant COD reduction. Experiments in the batch reactor confirmed, in general, the predicted results of optimisation developed from Erlenmeyer batch assays. The T. versicolor culture remained active during 42 days of study in the SBR, providing approximately 80% of COD reduction. CONCLUSION: Trametes versicolor may be considered as very promising for the biological treatment of effluents from kraft pulp mills in an SBR system instead of the activated sludge mixed cultures traditionally used. Copyright © 2008 Society of Chemical Industry     

Disinfection of wastewaters: high-energy electron vs gamma irradiation

A study was undertaken to examine the sensitivity of a wastewater population of coliphage, total coliforms and total flora present in raw sewage and secondary effluent after irradiating with similar doses delivered by a high-energy electron beam and y -radiation. The electron beam study was conducted on a large scale at the Virginia Key Wastewater Treatment Plant, Miami, Fla. The facility is equipped with a 1.5 MeV, 50 mA electron accelerator, with a wastewater flow rate of 8 ls⁻¹. Concurrent y-radiation studies were conducted at laboratory scale using a 5000 Ci, ⁶⁰Co y -source. Three logs reduction of all three test organisms were observed at an electron beam dose of 500 krads, while at least four logs reduction were observed at the same dose utilizing the y-source.     

焦化污水生化处理系统的改造

介绍了焦化污水生化处理系统的改造、开工、调试和运行情况．讨论了处理过程中的影响因素、操作管理经验以及污水处理工艺的特点和发展前景。     

焦化废水除氟技术及其应用

阐述了焦化废水中氟离子的降解机理,分析了化学沉淀法和混凝沉降法等除氟工艺及其处理效果,并对宝钢焦化废水的除氟工艺的进行了评价。     

湿法磷酸装置三废治理新进展

湿法磷酸装置排放的三废对环境危害较大 ,尤其是废水治理长期以来尚未得到全面控制。阐述了某新建的湿法磷酸装置从工艺流程上通盘考虑 ,采用多次串级利用 ,实现污水全封闭、零排放的流程 ,达到了由清到浊、由冷到热 ,多次利用、自身消化 ,实现平衡、避免污染的目的 ,并介绍了废气和废渣治理的新措施。指出应坚持精心操作和维护 ,巩固已取得的三废治理成果     

铝型材加工氧化着色污水处理的工程实践

采用中和—加药混凝—沉淀—压滤除渣的方法处理铝型材加工氧化着色污水。出水pH值及悬浮物等指标满足《污水综合排放标准》GB8978—96中一级排放标准。改气浮法为沉淀法,采用竖流式沉淀池,简化工艺流程,缩短处理时间,节约投资与运行费用。     

当代医药工业的特点及我国发展现状和对策

介绍了当代医药工业的生产特点,对我国医药工业的发展现状进行了分析,指出了存在的问题,提出我国医药工业的发展必须大力推进科技进步,加速新药研制,改进质量控制指标和方法,完善质量和技术标准体系,通过重组,优化资源配置。     

低密度泡沫玻璃的研究与应用

低密度泡沫玻璃是利用碎玻璃制造的一种气孔率大于90%的隔热保温材料,它具有强度高、导热系数小、吸水率低、不吸湿、耐腐蚀等特性,在潮湿环境下抗冻性能好,是一种优良的低温、超低温隔热保温材料。该产品用途广泛,所用的原材料简单易得,但生产工艺过程比较复杂,生产过程控制精度要求较高,容易产生各种缺陷而影响产品的质量。本文对低密度泡沫玻璃的生产工艺过程进行详细的分析研究,提出相应的措施,确保产品的低密度和高成品率,提高产品的性能,扩大产品的使用范围。