制备低硫可膨胀石墨的研究

研究了以过二硫酸铵作氧化剂低硫可膨胀石墨的制备，找到了在较低温度下，制备低硫可膨胀石墨的最佳条件。即过二硫酸铵和石墨的重量比为１５％；反应温度为５５℃；反应时间为４０ｍｉｎ；硫酸浓度为９８％；硫酸与石墨的重量比为４∶１，草酸和硝酸（浓度为６５％）的重量比为７．５％时，所制得的可膨胀石墨含硫量为０．６５％，膨胀容积为２００ｍＬ／ｇ可膨胀石墨。并且，其终端产品柔性石墨具有优良的力学性能和抗氧化性能。     

Efficient photodegradation of phenol assisted by persulfate under visible light irradiation via a nitrogen-doped titanium-carbon composite

To realize the utilization of visible light and improve the photocatalytic efficiency of organic pollutant degradation in wastewater, a nitrogen-doped titanium-carbon composite (N-TiO₂/AC) prepared by sol-gel methods was applied in the photodegradation of phenol assisted by persulfate under visible light irradiation (named N-TiO₂/AC/PS/VIS). The results show that a synergistic effect exists between visible-light photocatalysis and persulfate activation. Compared with TiO₂/PS/VIS, the phenol degradation rate was found to be observably improved by 65% in the N-TiO₂/AC/PS/VIS system. This significant increase in degradation rate was mainly attributed to the following two factors: 1) The N and C doping can change the crystal structure of TiO₂, which extends the TiO₂ absorption wavelength range to the visible light region. 2) As an electron acceptor, PS can not only prevent electrons and holes from recombining with each other but can also generate strong oxidizing radicals such as ∙SO₄^– and ∙OH to accelerate the reaction dynamics. The process of phenol degradation was found to be consistent with the Langmuir pseudo-first-order kinetic model with an apparent rate constant k of 1.73 min^–1. The N-TiO₂/AC/PS/VIS process was proven to be a facile method for pollutant degradation with high pH adaptability, excellent visible-light utilization and good application prospects.     

Graft polymerization of vinyl acetate onto granular starch: Comparison on the potassium persulfate and ceric ammonium nitrate initiated system

This work was undertaken to discuss in depth the vital differences in the morphological development during synthesis, and properties of starch‐g‐poly‐(vinyl acetate) copolymers using two different initiators, potassium persulfate (KPS) and ceric ammonium nitrate (CAN). KPS‐initiated system gave relatively low values of grafting ratio and grafting efficiency, indicating a great tendency for the formation of poly(vinyl acetate) homopolymer (PVAc). Yet, higher values were seen for the CAN‐initiated system. Transmission electron microscope observations indicated a relatively broad distribution of latex particles for the KPS‐initiated system. The surface potential of latex particles was about ?3.5 mV, which turned out to be insufficient to maintain stability of latex particles. On the other hand, a uniform particle size distribution was found for the CAN‐initiated system, as the surface potential of latex particles was 21.5 mV. Moreover, radicals on starch molecules were generated directly through a redox reaction with positively charged ceric ion. The hydrophobic PVAc chains were thus grafted on starch, resulting in an amphiphilic graft copolymer, which provides a sufficient stabilization degree as a role of surfactant to render a relatively uniform distribution of latex particles. The synthesized starch‐g‐poly(vinyl acetate) copolymers were further converted to starch‐g‐poly(vinyl alcohol) through saponification, which were subjected to evaluations regarding the biodegradation and cell culture capability. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 102: 3017–3027, 2006     

PS协同Z型异质结2D/BiOI/g-C3N4 光催化降解四环素

以三聚氰胺为前驱体，采用简单的热聚合方法制备了超薄石墨相氮化碳（g-C3N4），并用原位沉积-沉淀法在g-C3N4表面生成碘氧化铋（BiOI），复合构筑不同BiOI质量占比的二维碘氧化铋/石墨相氮化碳（2D/BiOI/g-C3N4，BICN-x）Z型异质结用以协同过二硫酸盐（PS）。通过XRD、FTIR、SEM、HRTEM、BET、UV-vis DRS对光催化剂的结构、表面官能团、形貌特征、比表面积和光学性能进行表征分析。结果表明：BiOI与g-C3N4质量比为2∶1（BICN-3）时，通过密切的界面耦合，光生电子-空穴对分离效率较高，光生e-以更快的迁移速度到达结构表面，并且在LED照射60 min内，BICN-3与PS形成的催化体系（BICN-3/PS）去除了88.2%的四环素（TC，10mg/L），降解速率是单独BICN-3的3.82倍。     

Leaching of a copper flotation concentrate with ammonium persulfate in an autoclave system

The leaching behavior of a copper flotation concentrate was investigated using ammonium persulfate （APS） in an autoclave systee. The decomposition products of APS, active oxygen, and acidic medium were used to extract metals from the concentrate. Leaching experiments were performed to compare the availability of APS as an oxidizing agent for leaching of the concentrate under atmospheric conditions and in an autoclave system. Leaching temperature and APS concentration were found to be important parameters in both leaching systems. Atmospheric leaching studies showed that the metal extractions increased with the increase in APS concentration and temperature （up to 333 K）. A similar tendency was determined in the autoclave studies up to 423 K. It was also determined that the metal extractions decreased at temperatures above 423 K due to the passivation of the particle surface by molten elemental sulfur. The results showed that higher copper extractions could be achieved using an autoclave system.     

DF-07低温压裂液复合破胶体系的研究及应用

针对低温地层压裂改造液体破胶难度大、储层伤害率高等问题,分析了不同类型破胶剂的破胶机理,研究了由过硫酸盐和引发剂组成的DF-07低温压裂液复合破胶体系的组分比例,评价了不同使用条件下对压裂液携砂粘度和破胶性能的影响程度以及降低残渣含量与保护地层能力,并在永利地区低温储层现场进行了2井次压裂施工应用。通过选择适宜的组分配比与用量,可使压裂液在保持较高的携砂粘度的前提下,达到彻底破胶、降低地层伤害和提高压裂排液及增产效果的目的。     

废弃锂电池电极材料中有价金属的赋存状态

这是一篇冶金工程领域的论文。以废旧磷酸铁锂电池正极粉为对象,开展了以Na₂S₂O₈作为氧化剂,并添加低浓度乙酸作为浸出剂选择性浸锂的研究,考查了Na₂S₂O₈加入量、乙酸浓度、浸出温度、浸出液固比和浸出时间等对锂选择性浸出影响。在乙酸浓度0.3 mol/L、Na₂S₂O₈加入量为理论量的1.1倍,浸出液固比10 mL/g、室温浸出2 h条件下,锂、铁、磷的浸出率分别为98.05%、4.49%和2.46%。     

深层搅拌技术在有机物污染场地原位化学氧化修复中的应用

原位化学氧化修复可以通过浅层搅拌、建井注射、直推注射、高压旋喷和深层搅拌等方式实现氧化药剂向污染土壤和地下水的投加、混合以及反应。针对有机物污染场地的水文地质、污染分布和修复目标等情况,采用深层搅拌技术进行原位化学氧化修复的设计和实施,修复后土壤中各目标污染物检出浓度较场调时的初始浓度均有明显下降且低于修复目标值。工程实践表明,深层搅拌技术适用于污染较深、污染程度较轻的有机物污染场地的原位化学氧化修复,具有工艺成熟、混合均匀、占地少、环境影响小、性价比高和修复效果好等优点,有广阔的应用前景。深层搅拌技术在场地修复领域应用时,应考虑药剂对设备及其管线的腐蚀,操作人员的安全防护,以及修复后场地的承载力等事项。     

Fe2+催化H2O2、S2O82-、S2O82--H2O2降解橙黄G

以偶氮染料橙黄G(OG)为目标污染物,研究Fe2+分别催化H2O2、S2O82-、H2O2-S2O82-降解0.1 mmol/LOG Fe2+/H2O2体系,[Fe2+]=1 mmol/L,pH=3,[H2O2]0=10 mmol/L,降解30 min OG脱色率为96%,随着pH值增大和[H2O2]0>10 mmol/L,OG脱色率减小,呈线性变化。Fe2+/S2O82-体系,随着S2O82-初始浓度增加OG脱色率增大,随着pH值增大OG脱色率减小,呈非线性变化。Fe2+/H2O2-S2O82-体系,pH=3,[H2O2]0=2 mmol/L,[S2O82-]0>10 mmol/L时OG脱色率持续增大。Fe2+/H2O2-S2O82-体系矿化率最高。利用乙醇和硝基苯作为分子探针,采用分子探针竞争实验鉴定该体系中产生的SO4.和OH.。