Inhibition of microbial growth in ready‐to‐eat food stored at ambient temperature by modified atmosphere packaging

This study was undertaken to develop a modified atmosphere package to control microbial growth in ready‐to‐eat (RTE) products stored at ambient temperature. Ethanol and/or limonene associated with modified atmosphere (CO₂ : O₂ : N₂ = 30% : 5% : 65%) was used to inhibit the growth of total air‐borne microorganisms and Escherichia coli in RTE products stored at 25°C. The results indicated that 0.05% ethanol vapour in the headspace was effective to inhibit the growth of air‐borne microorganisms and E. coli at 25°C for 72 h in a model study, and the effectiveness was related to ethanol content. Both 73 ppm limonene and 0.05% ethanol vapour enhanced the bacteriostatic effect of modified atmosphere in RTE sushi roll products, and no off‐flavour was detected using this formulated gas; however, no significant inhibitory effect was observed for RTE cold noodle products. This study concludes that combinations of carbon dioxide, ethanol or limonene vapours are effective to inhibit microbial growth in RTE food at ambient temperature, and the outcome may be due to the hurdle effect. Copyright © 2003 John Wiley & Sons, Ltd.     

Efficiency of repeated batch penicillin fermentation using two fermentors. Computer simulation and optimisation

Repeated batch operation using two fermentors (RBTF) to penicillin fermentation was demonstrated by computer simulation to improve productivity. Three operation modes were compared: chemostat, repeated batch operation using a single fermentor (RBSF) and RBTF; in each case account was made of the lag period before growth. The simulated fermentor performances were assessed on the basis of the penicillin productivity and concentration; the simulation was based on published batch fermentation data. It was shown that RBTF was superior to RBSF and chemostat. The advantage of RBTF increased as the lag period became greater.     

Comparison of Lactic Acid Productivities at High Substrate Conversions in a Continuous Two-stage Fermenter With Cell Recycle Using Different Kinetic Models

The steady-state performance of a two-stage recycle fermenter with two different types (I and II) of configurations for staging was investigated numerically for the continuous production of lactic acid. In Type I the bleed broth withdrawn from the first stage is supplied to the second fermenter, and in Type II both filtrate and bleed broth from the first stage are introduced to the second stage. Using four different kinetic models taken from the literature, the effects of operating parameters on the overall lactic acid productivities and the overall substrate conversions are examined. At moderate conversions, productivities for Type I operation are found to be higher than those for Type II and for the single-stage system. In the case of high conversions close to complete consumption, Type II operation is more efficient than the Type I and single-stage systems. For 99% conversion and 40 kg m^-3 substrate feed concentration, productivities for Type II are predicted to be 14-74% higher compared to those for the single-stage system at the same bleed ratios.     

Impact of the addition of an enzyme pool on an activated sludge system treating dairy wastewater under fat shock loads

BACKGROUND: The application of lipase‐rich enzyme pools (such as the crude solid enzymatic preparation (SEP) obtained from Penicillium restrictum solid‐state fermentation of agro‐industrial wastes) to activated sludge systems may be an effective strategy for preventing various operational problems. The continuous addition of SEP to the treatment system can become cost‐prohibitive when in situ production and/or storage are factored in. The application of SEP to high‐fat wastewater treatment would only be justified as an emergency measure, such as a sudden increase in the fat content of the bioreactor influent. Therefore, the primary objective of this work was to investigate the efficiency of a crude SEP during fat shock loads, simulated through the periodic addition of dairy industry waste containing high fat concentrations to the feed stock of an activated sludge system, operated in continuous mode. RESULTS: The test bioreactor exhibited a higher average chemical oxygen demand (COD) removal efficiency than the control bioreactor (83% for control and 90% for test) and the fat accumulation in the biological flocs of the test bioreactor was 3.2 times lower than that in the control bioreactor. Turbidity was also lower in the effluent of the test bioreactor (123 and 66 FTU in control and test, respectively) and it had a shorter recovery time between shock loads, especially when the interval between loads was shorter than one month (biweekly and weekly shock loads). CONCLUSION: The addition of SEP during fat overloads in the reactor feed maintained efficient COD removal in the test bioreactor for 270 days without any operational problems. Copyright © 2008 Society of Chemical Industry     

L-乳酸和聚乳酸的研究进展

综述了乳酸发酵和提取工艺以及聚乳酸的合成进展,分析了L-乳酸及合成聚乳酸两种产品的市场前景,对进一步的技术开发提出了建议。     

KCl与NaCl在低盐固态法酱油发酵中的应用比较

对KCl与NaCl在低盐固态酱油发酵中的应用进行了比较研究。结果表明：用KCl代替NaCl，KCl的浓度要高于NaCl才能抑制发酵期间杂茵的污染，且使用KCl的发酵效果比NaCl要好。     

Acidogenic fermentation of blended food‐waste in combination with primary sludge for the production of volatile fatty acids

The performance of a laboratory‐scale anaerobic acidogenic fermenter fed with a mixture of blended kitchen food‐waste and primary sludge from a sewage treatment plant was investigated for the production of volatile fatty acids (VFA). The operating variables for acidogenic fermentation were kitchen food‐waste content (10 and 25 wt %), hydraulic retention time (HRT: 1, 3 and 5 days), temperature (ambient: 18 ± 2 °C, and mesophilic: 35 ± 2 °C) and pH (varied from 5.2 to 6.7). The experimental results indicated that effluent VFA concentrations and VFA production rates were higher at ambient temperature than at mesophilic conditions. The net amount of VFA with 10 wt % food‐waste increased up to 920 mg dm^?3 with an increase of HRT, but contrasting results (a decrease of 2610 mg dm^?3) were found due to the conversion of VFA into biogas in the case of 25 wt % food‐waste, which increased significantly at HRT of 3–5 days. In terms of biogas composition (CO₂ and CH₄), the organic matter was converted into CO₂ through the oxidative pathway by facultative species at low temperature while mesophilic temperature and optimum pH (6.3–7.8) played a pivotal role in increasing rate of conversion of VFA into biogas by methanogenesis. Rates of VFA production and their conversion are dependent on the food‐waste content in the mixture. Yet, the higher concentration of food‐waste (25% compared with 10%) did not produce VFA proportionally due to the increased rate of conversion of VFA into gaseous products. The maximum VFA production rate (0.318 g VFA_produced g^?1 VS_fed day^?1) was achieved in the 10 wt % food‐waste at ambient temperature and at a 5‐day HRT. Copyright © 2005 Society of Chemical Industry     

The Use of Biopreservatives in the Control of Bacterial Contaminants of Sugarcane Alcohol Fermentation

ABSTRACT: Efficacy and safety of biopreservatives were studied for microbiological control of alcohol fermentation. Minimum inhibitory concentrations of nisin and lysozyme, and combinations with EDTA and Tween 20, were determined for Lactobacillus plantarum, L. fermentum , and L. confusus. The highest MIC value for nisin was 9.0 ppm for L. fermentum. Lysozyme was efficient against L. plantarum (700 ppm). A 2⁴ factorial design was used to study the effect of biopreservatives and potentiators on the growth kinetics of Lactobacillus fermentum. The combination of 8.6 ppm of nisin plus 0.1% of Tween 20 delayed the lag phase by 12 h. The biopreservatives did not affect the fermentation kinetics of Saccharomyces cerevisiae.     

以杂多酸为催化剂合成乙二醇-乙醚的研究

研究了杂多酸催化无水乙醇和环氧乙烷(EO)制备乙醇乙醚的醚化反应,考察了不同种类的杂多酸以及醚化反应工艺条件对反应活性和选择性的影响.结果表明,PW_(12)催化剂的反应活性高、反应温度低、选择性好,当用PW_(12)作催化剂,乙醇与环氧化乙烷之比为3.0(mol),反应温度45℃,反应时间1h时,转化率和选择性均超过97%.     

关于我国二乙胺的生产技术及其发展

概述了乙醇氨解法等二乙胺的六类合成方法及国内外二乙胺的生产情况，指出了我国二乙胺生产技术与国外的差距，提出了扩大生产规模、开发下游产品、开发或引进加压加氢工艺等建议