The use of sulfide cluster-derived catalysts to understand the promotional effect in hydrotreatment catalysis

Sulfide cluster-derived ensembles are promising models of the active sites in commercial hydrotreatment catalysts. A series of sulfide clusters were adsorbed intact onto high-surface-area γ-alumina, magnesium oxide and activated carbon supports, then pretreated to produce highly dispersed catalytic ensembles with sizes similar to those of their precursor clusters. The activities of the bimetallic cluster-derived catalysts were significantly higher than those of the monometallic catalysts. We took this as evidence that direct interactions between molybdenum and the promoter element cause the promotional effect observed in commercial hydrotreatment catalysts. The hydrodesulfurization and hydrodenitrogenation activities correlated with the extent of molybdenum reduction. Our results suggested that the active sites in promoted hydrotreatment catalysts are centered on molecular-scale ensembles containing molybdenum, sulfur and the promoter element.     

Design,synthesis, and characterization of main‐chain,aromatic polyesters based on 3,4‐ethylenedioxythiophene

A series of new thermoplastic polyesters based on 3,4‐ethylenedioxythiophene (EDOT) with flexible aliphatic spacers have been synthesized and characterized for the first time. The thermal properties of these polyesters based on EDOT are comparable to those of conventional polyesters based on the 1,4‐phenyl unit, indicating that EDOT is a viable replacement for the phenyl units. The glass‐transition and melting‐transition temperatures decrease monotonically with an increase in the spacer length. Theoretical calculations have revealed that the core angle for EDOT is comparable to that of unsubstituted thiophene and hence should be compatible with the formation of the mesophase. This has been confirmed experimentally by the synthesis of a main‐chain, thermotropic, liquid‐crystalline polyester based on EDOT that exhibits fluid birefringence. In fact, this is the first report in which a main‐chain, liquid‐crystalline polymer based on 3,4‐disubstituted thiophene has been successfully designed and synthesized. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 3479–3486, 2006     

Synthesis and structural characterization of 3-thienyl alkyl imides

Five new thiophene imides having the structures C₄H₃SC(O)N(H)C(O)R (where R=Me, Et, Pr, t-Bu, 1-4) and C₄H₃SCH₂C(O)N(H)C(O)CH₃5 have been prepared. Control over the orientation of the carbonyl groups was achieved by the introduction of a bulky group in the terminal position of the side chain, and molecular modeling calculations indicated that the energy difference between the ct and tt conformations is small. The acidity of 1-4 decreases from Me to t-Bu, and, although 1-4 will not undergo oxidative polymerization, the introduction of a single spacer CH₂ group allows 5 to polymerize.     

Cross-metathesis of vinyl aromatic heterocycles with 1-octene in the presence of a Schrock catalyst

Metathesis of 2-vinyl aromatic heterocycles such as furan, thiophene, pyrrole and pyridine in the presence of a molybdenum-based Schrock catalyst has been investigated from a synthetic point of view. The self-metathesis of 2-vinyl aromatic heterocycles was not successful. However, in cross-metathesis of thiophene, furan and styrene with 1-octene, the cross-metathesis product, heterodimer, was readily obtained selectively, together with only small amounts of the two corresponding self-metathesis products. The origin of the surprisingly high selectivity of heterodimer formation was elucidated through metallacyclobutane intermediate mechanism, observations of carbenes by in situ ¹H NMR, and reaction products.     

Novel structure-defined chiral bis(oxazolinyl)thiophenes for Ru-catalyzed asymmetric cyclopropanation

The novel structures of sulfur-containing chiral bis(oxazoline) compounds which have been synthesized have been determined by X-ray crystal diffraction analyses. A high enantioselectivity (ee >99%) in the asymmetric cyclopropanation of diphenylethene with diazoester using the bis(oxazoline)-Ru(II) catalyst was obtained.     

Tuning of the alpha-terthiophene radical cation coupling reaction using mixed micelles with varying charge density.

The photophysics and photochemistry of alpha-terthiophene (alphaT), compartmentalized in mixed nonionic/anionic micelles, have been investigated with focus on the influence of the micellar surface charge density on the formation of the radical coupling product alpha-hexathiophene (alphaH). By varying the ratio of nonionic-to-anionic surfactants, and assuming ideal mixing, the charge density of the mixed micelles was varied. From Poisson-Boltzmann calculations, performed using the cell model, the electrostatic potential and the counterion activity were estimated as a function of the distance from the micellar surface. Upon excitation, the triplet state of alphaT is formed, from which the alphaT radical cation can be formed by absorption of a second photon. The radical cation can form alphaH if it encounters another alphaT radical cation. Under the experimental conditions used, this implies that the alphaH formation only occurs if the compartmentalized radical cation is able to migrate from its host micelle to another micelle, either via the surrounding bulk or by fusion of two micelles followed by mixing of their contents before micellar fission. The formation yield of the radical cation depends on the charge density of the mixed micelle; a lower charge density, that is, an increased amount of nonionic surfactant, lowers the yield. The yield of the coupling product alphaH, however, does not follow the same trend. A maximum yield of alphaH is found at intermediate nonionic surfactant molar ratios. This behavior is understood in terms of the Poisson-Boltzmann simulation results and by comparing charge-density changes as a function of molar fraction with the changes in counterion activity. The alphaH yield is a result of the balance between an increased possibility of radical cation bulk migration and a lowered electrostatic stabilization of the radical.     

Pervaporation separation of alkane/thiophene mixtures with PDMS membrane

Worldwide concerns over environment have stimulated increasing interest both in academic and industry for deep desulfurization of gasoline. Polydimethylsiloxane (PDMS) composite membrane was used to separate the binary and multicomponent alkane/thiophene mixtures by pervaporation. Effect of carbon number and concentration of alkane, and of feed temperature, on the separation efficiency of alkane/thiophene mixtures was investigated experimentally. Experimental results of binary mixtures indicated that the total fluxes for different alkane/thiophene mixtures decrease with increase of carbon number in the alkanes. Corresponding activation energies of permeation for alkanes in PDMS membrane increase with increase of carbon number in the alkanes. Differences of molecular size and structure of the alkanes lead to various selectivities thereof within PDMS membrane. In addition, the permeability and activation energy of thiophene in various systems differ from each other due to coupling effect which should be taken into consideration when dealing with multicomponent systems. Pervaporation results of ternary systems indicated that, the increase of content of lighter alkane in feed would result in a larger total flux, but a smaller selectivity to thiophene simultaneously. A quaternary system, the mixture of n-heptane, n-octane, n-nonane and thiophene, was employed to simulate the desulfurization process of gasoline. With the membrane having a PDMS layer of 11 μm, the total flux was measured to be about 1.65 kg/m² h, with the corresponding enrichment factor of thiophene 3.9 at 30 °C.     

Synthesis and characterization of thiophene‐substituted N‐phenyl maleimide polymers by photoinduced radical polymerization

Two types of novel functionalized N‐[4‐(4′‐hydroxyphenyloxycarbonyl)phenyl]maleimide and N‐(4‐{[2‐(3‐thienyl)acetyl]oxyphenyl}oxycarbonylphenyl)maleimide (MIThi) were synthesized starting from 4‐maleimido benzoic acid. Photoinduced radical homopolymerization of MIThi and its copolymerization with styrene were performed at room temperature to give linear polymers containing pendant thienyl moieties using ω,ω‐dimethoxy‐ω‐phenylacetophenone as an initiator. Copolymers' compositions and the equilibrium constant (K) for electron donor–acceptor complex formation suggest an alternating nature of the copolymerization. The monomer reactivity ratios and Alfrey–Price Q,e values were also determined. The thermal behavior of the new synthesized monomers and polymers was investigated by differential scanning calorimetry and thermogravimetric analysis. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 995–1004, 2002     

Gas-phase Reaction of 2-Chlorothiophene with Hydrogen Sulfide in the Presence of Alcohols

The effect of methanol and ethanol on the route of the gas-phase reaction of 2-chlorothiophene with hydrogen sulfide, leading to 2-thiophenethiol and to bis(2-thienyl) sulfide, has been investigated. It was found that methanol significantly enhances this reaction and increases its selectivity for the thiol at higher temperatures than without the initiator. The optimal conditions were achieved at 570°C in the presence of 10 mole % of methanol when the conversion of the 2-chlorothiophene in the reaction with hydrogen sulfide reaches 98% and the yield of the thiophenethiol (43%) exceeds that of the bis(2-thienyl)sulfide (31%). In the absence of methanol the 2-thiophenethiol is formed only at 510-540°C in just 17% yield, the basic reaction product being the indicated sulfide (52% yield); the conversion of the 2-chlorothiophene does not exceed 54%.     

Effect of the Structure of Nonuniform Conducting Polymer Films on Their Electrochemical Impedance Response

Electrochemical impedance spectroscopy is used to characterize thin p-doped polypyrrole (PPy) films in propylene carbonate (PC) solutions and poly(trifluorophenyl)thiophene (PTFPT), in solutions based on sulfolane (SF). It appears that the latter film is much less swelled compared to the former one. One consequence of this difference is that the PTFPT film shows a much higher bulk resistance compared to that for the PPy film. Another important consequence is that the swelling of the PTFPT film is essentially physically non-homogeneous. Two parallel, uncoupled paths, with different chemical diffusion coefficients, model the experimental results adequately. In order to quantify the impedance spectra for both polymer films, we use a model proposed by Rubinstein et al. explaining the difference in the diffusion coefficients of Ru(bpy)^3+/2+ ₃ within a thin Nafion film. The model can also predict the impedance spectra for composite powdery electrodes containing different particle sizes, such as composite cathodes and graphite anodes used in lithium batteries.