Solvothermal Synthesis of Molybdenum Disulfide Hollow Spheres Modified by Cyanex 301 in Water–Ethanol Medium

Hollow spherical molybdenum disulfide has been successfully synthesized via a solvothermal method using Cyanex 301 as sulfur source and modification agent. The hollow spheres are characterized by transmission electron microscopy, scanning electron microscopy, X-ray diffraction and Energy-Dispersive X-ray analysis. The influences of reaction conditions are also discussed while a mechanism is proposed to explain the formation of the peculiar morphology.     

有限长FGM圆筒的热/机应力的解析解

利用微分方程的级数求解方法,分析了两端简支的有限长功能梯度圆筒的轴对称稳态热弹性问题,推导出了稳态温度场与应力场的解析解。分析中采用指数函数模型来描述FGM圆筒中材料性能在厚度方向的连续变化,同时忽略温度对材料性能的影响。另外,论文以金属钼和多铝红柱石制成的功能梯度圆筒为例,给出了稳态温度场和应力场的数值结果。     

暗中空光束角动量与中性原子的相互作用及其应用

综述了暗中空光束自旋与轨道角动量的一些性质及其与中性原子之间的相互作用,并简单介绍了暗中空光束及其角动量在原子光学和玻色_爱因斯坦凝聚(BEC)以及各种原子光学器件研制方面的应用.     

Formation of Negative Hydrogen Ions in a Ne–H2 Hollow Cathode Discharge

The formation of negative hydrogen ions in a conventional hollow cathode discharge has been investigated. A mixture of Ne and H₂ proved to be more advantageous compared to pure hydrogen. The study has been performed by solving the electron Boltzmann equation, coupled with a system of balance equations for neon and hydrogen neutral and charged particles. The vibrational distribution function of hydrogen has been calculated. Our calculations show unusually high population of vibrationally excited hydrogen molecules in a Ne–H₂ mixture, which explains the high density of negative hydrogen ions under optimal conditions (total gas pressure of few Torr, hydrogen number mole fraction of 1–10% and discharge current of 10–100 mA). Line intensities originating from highly excited neon states vs. hydrogen pressure have been calculated and a comparison with existing experimental results has been made.     

Generalization of in-situ polymerization method for preparing core-shell polymeric nanospheres and hollow spheres

According to the new method of preparing core-shell nanospheres developed by our group, by using two monomers, 2-hydroxypropyl methacrylate(HPMA) and vinyl acetate(VAc), two kinds of core-shell nanospheres with poly(ɛ-caprolactone) (PCL) as the core and crosslinked poly(2-hydroxypropyl methacrylate) (PHPMA) or poly(vinyl acetate) (PVAc) as the shell were successfully prepared under similar conditions. After degrading the PCL cores of the two kinds of nanospheres by lipase, the corresponding crosslinked poly(methyl acrylic acid) hollow spheres and crosslinked poly(vinyl alcohol) hollow spheres were obtained. Results indicate that the new method we proposed for preparing core-shell polymeric nanospheres via in-situ polymerization can be generalized to a certain extent, and it is suitable for many systems provided the monomer used is soluble in water, while its corresponding polymer is insoluble in water. Translated from Chemical Journal of Chinese University, 2006, 27(9): 1762–1766 [译自: 高等学校化学学报]     

Progress on phthalocyanine-conjugated Ag and Au nanoparticles: Synthesis,characterization, and photo-physicochemical properties

Phthalocyanine (Pc) complexes are an important class of dyes with numerous (e.g., biological, photophysical, and analytical) applications. Among the methods used to improve the properties of these complexes, one should mention the introduction of different substituents, variation of the central metal ion, ligand exchange, and conjugation to nanomaterials (e.g., carbon-based nanomaterials and metal nanoparticles (NPs)). This work briefly reviews Pc complex conjugation to Ag and Au NPs, highlights the different NP shapes, and discusses the diversity of conjugation approaches. Moreover, the use of UV–Vis spectroscopy, powder X-ray diffraction, X-ray photoelectron spectroscopy, transmission electron microscopy, atomic force microscopy, dynamic light scattering and Fourier transform infrared spectroscopy to characterize Pc-NP hybrids is summarized. The effect of conjugation on Pc photo-physicochemical properties (fluorescence, singlet oxygen generation, triplet state formation, and optical limiting behavior) is discussed, and future perspectives for the synthesis and applications of new hybrids are provided.     

氯磺化聚乙烯结构和性能研究Ⅰ.氯磺化反应及其对晶体结构的影响

氯磺化聚乙烯水解后是一种性能特异的离子交换膜。本文研究了低密度及高密度聚乙烯中空纤维氯磺化反应时间与交换容量之间的关系,并用红外光谱及广角X射线衍射法测定了氯磺化反应对聚乙烯晶体结构的影响。结果表明,氯磺化反应主要发生在聚乙烯的非晶区,最大交换容量及反应速度均与非晶区含量有关。反应对晶粒表面也有一定程度的侵蚀作用,随着交换容量的增加,结晶度下降,晶粒度减小。低密度及高密度聚乙烯的变化趋势相似,但前者比后者变化更显著。     

PBA@POM Hybrids as Efficient Electrocatalysts for the Oxygen Evolution Reaction

To realize the effective conversion of renewable energy through water decomposition, efficient electrocatalysts for the oxygen evolution reaction (OER) are essential. In this article, PBA@POM was successfully prepared with a Prussian blue analogue (PBA) as the initial structure. A facile hydrothermal process is reported for obtaining PBA@POM by etching the cubic PBA with a strong Brønsted acid, H₃PMo₁₂O₄₀ (HPMo). The hollow cube structure not only exposes more active sites but also promotes electron transport, which results in excellent electrocatalytic activity for the OER. Compared with the PBA, which initially simply adhered to POM, the optimum PBA@POM hybrids display remarkably enhanced OER catalytic activity, with an almost constant overpotential of 440 mV at a current density of 10 mA cm^?2 and a small Tafel slope (23.45 mV dec^?1). The facilely prepared PBA@POM with good electrochemical activity and stability promises great potential for the OER.     

Methane polymerization with a hollow cathode: Influence of the cathode metal

Methane, mixed with argon, has been polymerized by means of a hollow-cathode discharge system. Two types of cathodes were studied; one was made of a solid solution of 81% tungsten and 19% platinum, while the other was of pure tungsten. Under identical operating conditions, a higher polymer yield was found in the case of the platinum cathode (90% against 70% for tungsten). The work function of the solid solution was estimated to be 6.3 eV, compared with 4.4 eV for tungsten. In terms of the data available, the thermionic current, which is the main source of energetic electrons, is about one order of magnitude lower for the solid solution cathode when compared with the tungsten cathode thermionic current. However, the polymer yield observed is higher in the former case. The concentration of the CH species in the hollow cathode was found to differ greatly for the cathodes tested and was about 5 times higher in the case of tungsten-platinum cathodes. Since no excited platinum vapor could be detected in the gas phase, the increase in CH concentration was attributed to a catalytic effect of the cathode inside surface. An evaluation of the plasma polymer deposition rate yields 70 nm·s^–1 for the platinum-tungsten type hollow cathode and 42 nm·s^–1 for the tungsten one. In both cases, the deposition rate is much higher than those obtained from the most widely used methods for plasma polymer deposition (0.10–1.0 nm·s^–1) implying methane-argon mixtures, and is comparable to the results obtained with a new type of plasma polymer deposition reactor described in the literature.     

Racemic ofloxacin separation by supported-liquid membrane extraction with two organic phases

As the relation of chirality and activities of drugs is researched deeply, people become to re-alize the clinic importance of chirality. The different enantiomers of a drug can have vastly differ-ent pharmacological activities, pharmacokinetic processes and toxicity[1,2]. The most well-docu- mented example is that of the drug substance thalidomide. Bitter lessons and scientific research promote the interest in single-enantiomer drugs, so the potential of the chiral drug market is enormous[3]. …