Some comments on the use of nitrogen selective detectors

Summary Several detectors which have a selective response toward nitrogen containing compounds are discussed. Data on sensitivities, detection limits and reproducibility of response are given. The application of chemiluminescence to provide a nitrogen selective GC detector is proposed.     

Reactions of lithiated 2,5-dimethylazaferrocene with selected electrophiles

Lithiation of 2,5-dimethylazaferrocene 1 with sec-BuLi/TMEDA in THF at −78 °C proceeds (as shown by quenching with D₂O) to comparable extent on the methyl groups and the Cp ring. However, the outcome of the reaction of the lithiated 1 with an electrophile depends on the nature of this electrophile. In the reaction with 4-methoxybenzaldehyde only the product originated from the lateral lithiation is formed, whereas the reaction with 4-methoxyacetophenone and 4,4′-dimethoxybenzophenone afforded mixtures of the products resulting from lateral and ring-lithiation. Similar results were also obtained in the reaction of lithiated 1 with chlorodiphenylphosphine and diphenyl diselenide. On the other hand, the exclusive formation of the Cp-substituted product was observed in the reaction of lithiated 1 with N,N-dimethylformamide. The structures of selected products (oily compounds were transformed into the corresponding crystalline W(CO)₅-complexes) were confirmed by X-ray diffraction. The presented reactions open a novel entry to specifically substituted azaferrocenes (especially those containing heteroatom substituents) with potential applications as ligands for the homogenous catalysis.     

A practical approach to transferring linear gradient elution methods

Attempts to theoretically address the problems involved in transferring linear gradient elution methods have been somewhat ad hoc due to the simplifying assumptions usually made in conventional gradient elution theory. Until now, all equations based on the k* parameter of linear gradient elution theory used as the basis for predicting the separation selectivity have not explicitly included the effect of the dwell volume (VD). Using an exact equation for predicting k*, that is, one which fully accounts in an a priori fashion for VD, we find a set of simple yet exact equations which unequivocally must be satisfied to transfer an optimized linear gradient elution method from one system (column or instrument or both) to another. These relationships absolutely mandate that a change in the instrument dwell volume requires a proportional change in the column volume; in turn, a change in the column volume requires a proportional change in the flow rate and/or gradient time to maintain a constant gradient steepness. Although we are not the first to suggest these guidelines, this work provides a complete theoretical foundation for these exact guidelines for the maintenance of gradient selectivity for the case of transferring a linear gradient elution method between different columns packed with the same particles and/or between different instruments.     

Modification of the cation exchange resin properties by impregnation in polyethyleneimine solutions: application to the separation of metallic ions

A commercial cation exchange resin Amberlite 200 has been modified after immersion in solutions of polyethyleneimine (PEI). The kinetic of fixation of the metallic ions have been determined. The modification of the surface of the resin deals with a change in the order of the affinities of the resins towards cations. The retention is the function of the formation and the stability of the complex. The conditions of modification (pH, PEI concentration and time of immersion) have been examined and the modification was confirmed by the determination of the exchange capacities, the distribution coefficient (P) and the selectivity factors (S). The obtained results revealed the effect of PEI on the exchange properties of the resin. The pH range selected (6-8) permitted a good adherence of PEI onto the resin surface. The quantity of the adsorbed PEI was increased by raising the initial concentration and the immersion period. The exchange capacity for copper ion passed from 2.6 mmol g⁻¹, in the case of unmodified resin, to 3.9 mmol g⁻¹ for the modified one.     

SYNTHESIS, STRUCTURE AND PROPERTIES OF INTERPENETRATING SULFONIC ACID RESINS WITH HIGH CAPACITY

Two series of interpenetrating sulfonic acid resins (ISAR), 10×n and n×10, were prepared by means of the wet method, and the physicochemical, thermodynamic and kinetic properties of the ISAR were measured. The results show: 10×n resins exhibit better properties than n×10 ones, mainly in higher apparent degree of crosslinking and larger conformational entropy effect, among which, 10×1 resin exhibits the best thermodynamic and kinetic properties. In the DTA graphs of n×10 resins, there are two T_g and two T_(ox), but in those of 10×n, only one T_g and one T_(ox). This result well supports the conclusion that 10×n resins have much better interpenetrating structural aspects.     

Predicting the selectivity of imprinted polymers

Summary Imprinted polymers as stationary phases for HPLC separations have been the subject of extensive investigations in recent years. In order to aid the rational design of synthetic protocols for the preparation of imprinted polymers, a series of calculations were made to assess the equilibrium concentration of templatemonomer complexes as a function of association constant (K) for the functional groups involved in the interactions and initial concentrations of reactants. This data was then used to predict the selectivity of polymers prepared under different reaction conditions and the model was tested using an experimentally determined value ofK and separation factors taken from the literature.     

Beiträge zur Chemie der Pyrrolpigmente, 44. Mitt.: Gallenfarbstoffe als Ionophore

The carrier mediated transport of cations using model compounds of the verdinoid and rubinoid bile pigment structural type as ionophores is studied. Verdinoid bile pigments turn out to be very effective carriers for cations exhibiting a pronounced selectivity for certain transition metal ions like Cr^+-+, Fe⁺⁺, Cu⁺⁺ and Zn⁺⁺. The scope of this behaviour of verdinoid bile pigments is compared to [18]-crown-6 and meso-tetraphenylporphin and is discussed with regard to structural, biological, analytical and technical implications.

     

Temperature selectivity effects in reversed-phase liquid chromatography due to conformation differences between helical and non-helical peptides

In order to characterize the effect of temperature on the retention behaviour and selectivity of separation of polypeptides and proteins in reversed-phase high-performance liquid chromatography (RP-HPLC), the chromatographic properties of four series of peptides, with different peptide conformations, have been studied as a function of temperature (5-80 degrees C). The secondary structure of model peptides was based on either the amphipathic alpha-helical peptide sequence Ac-EAEKAAKEX(D/L)EKAAKEAEK-amide, (position X being in the centre of the hydrophobic face of the alpha-helix), or the random coil peptide sequence Ac-X(D/L)LGAKGAGVG-amide, where position X is substituted by the 19 L- or D-amino acids and glycine. We have shown that the helical peptide analogues exhibited a greater effect of varying temperature on elution behaviour compared to the random coil peptide analogues, due to the unfolding of alpha-helical structure with the increase of temperature during RP-HPLC. In addition, temperature generally produced different effects on the separations of peptides with different L- or D-amino acid substitutions within the groups of helical or non-helical peptides. The results demonstrate that variations in temperature can be used to effect significant changes in selectivity among the peptide analogues despite their very high degree of sequence homology. Our results also suggest that a temperature-based approach to RP-HPLC can be used to distinguish varying amino acid substitutions at the same site of the peptide sequence. We believe that the peptide mixtures presented here provide a good model for studying temperature effects on selectivity due to conformational differences of peptides, both for the rational development of peptide separation optimization protocols and a probe to distinguish between peptide conformations.     

Lower rim substituted tert-butylcalix[4]arenes. Part 8: Calix[4]arenes with dialkoxyphosphoryl functions. Synthesis and complexing properties

New compounds: 5,11,17,23-tetra-tert-butyl-25,26,27,28-tetrakis(3-diisopropoxyphosphorylpropoxy)calix[4]arene (1) and 5,11,17,23-tetra-tert-butyl-25,26,27,28-tetrakis(3-methoxyethoxyphosphorylpropoxy)calix[4]arene (2) were synthesized and their ionophoric properties in ion-selective membrane electrodes were studied in comparison with already described by us 5,11,17,23-tetra-tert-butyl-25,26,27,28-tetrakis(3-diethoxyphophorylpropoxy)calix[4]arene (3). Complexes of 1 with calcium(II), lanthanum(III), europium(III) and gadolinium(III) nitrates were prepared in direct reaction of the ligand and appropriate metal salts. They were characterized by spectral data (IR, UV/Vis, luminescence, NMR, ESI-MS) and elemental analysis. The similarity in complexing behavior of the (dialkoxyphosphoryl)propoxy-calix[4]arenes toward calcium and some lanthanides was observed.