Visible Up-Conversion Luminescence in Ho3+: BaTiO3 Nano-Crystals Prepared by Sol Gel Technique

Visible up-conversion emissions at (435, 545, 580, 675 and 690 nm) and (437, 547 575 and 675 nm) have been observed from the sol-gel derived nano-crystalline Ho³⁺: BaTiO₃ powders and thin films respectively, under 808 nm laser diode excitation emissions. Combined with the energy level structure of Ho³⁺ ions and the kinetics of the visible emissions, the up-conversion mechanism has been analyzed and explained. The blue, green and red emissions of both samples has been attributed to the ground state-directed transition from (⁵F₁), (⁵S₂) and (⁵F₅), which are populated through excited state absorption (ESA) for 808 nm excitation. Nano-structure pure barium titanate and doped with different concentrations of Ho³⁺ ions in the from of powder and thin film have been prepared by sol-gel technique, using barium acetate (Ba(Ac)₂), and titanium butoxide (Ti(C₄H₉O)₄), as precursors. The thin films were prepared by sol-gel spin coating method. The as-grown thin films and powders were found to be amorphous, which crystallized to the tetragonal phase after heating at 750°C in air for 30 minutes. The crystallite sizes of the thin film and powder both doped with 4% Ho³⁺ ions was found to be equal to 11 and 16 nm, respectvely.     

Perfluoropoly-ether/peroxide compounds: spectroscopic studies and quantum chemical calculations

Perfluoropolyethers (PFPEs) are a class of high performance materials used in a wide range of applications (refrigeration, lubrication, semiconductor industry, etc.). PFPEs containing peroxidic units are intermediate materials for the preparation of commercial end products. In this work we study the spectroscopic properties of ether and peroxides linkages in this class of compounds; nuclear magnetic resonance (NMR) spectra are discussed, FT-Raman data presented. Quantum chemical calculations on model molecules were used as a tool for the interpretation of the Raman experimental data and physical-chemical properties.     

Structural Analysis of Ti And Pb Citrate Using NMR and FT-Raman Signals and Quantum Mechanics Simulations

Titanium citrate and lead and titanium citrate were prepared by polymeric precursor method in aqueous solution. This citrate was analyzed by ¹H, ¹³C NMR and gHMBC–NMR (Hetero-nuclear multiple-bond correlation) to investigate the formation of the citrate complexs and influence of the Pb²⁺ ion in this complex. These complexs were characterized by interaction between Ti⁴⁺ ion and citric acid carboxyls. Quantum mechanic simulations in level ab initio were used to study the electronic structure and natural charges (NBO) to both the complexs. Such techniques indicated the formation of an octahedral complex with an arrangement similar to Ti atom in the crystalline structure of the PbTiO₃. A study using the technique FT-Raman made possible the confirmation of the interaction among the Ti⁴⁺ and Pb²⁺ ions with the citric acid carboxyls.     

Vibrational analysis of 3-trifluoromethylphenol

The molecular geometry and molecular vibrations of 3-trifluoromethylphenol have been investigated by means of quantum chemical calculations and vibrational spectroscopy. The computations indicated the preference of the conformer with the OH hydrogen pointing in the direction of the trifluoromethyl group by 0.9 kJ/mol with respect to the anti conformer. FT-IR spectra of the vapour and CCl₄ solution as well as FT-IR and FT-Raman spectra of the pure liquid have been recorded in the range of 4000–150 cm⁻¹. The interpretation of the spectra was based on a scaled quantum mechanical (SQM) analysis for which the initial force field was calculated at the Becke3-Lee-Yang-Parr (B3LYP) DFT level supplemented with a 6-311++G** basis set. Using 11 scale factors refined in the present study an rms deviation of 7.6 cm⁻¹ between the experimental and SQM frequencies has been achieved. On the basis of the computations 40 of the total of 42 fundamentals of the title compound have been assigned.     

Comparison of quantitative methods for analysis of polyphasic pharmaceuticals

Adequate very sensitive quantification methods are needed for the development and are also now required for the monitoring of undesirable solid form(s) as routine tests. The pre-requisite for quantitation are selectivity, sensitivity and most important the purity of standards and their proper storage, what is a challenge for metastable forms. Several analytical techniques are available such as X-ray diffraction, spectroscopy, thermal analysis and microcalorimetry. The different steps of the validation of the analytical methods and problems to be solved are discussed. Examples illustrate the different techniques and compare their possible advantages and limits. The relative standard deviation of measurements should allow for checking the homogenization procedure of mixtures for calibration. The validation should be carried out following ICH guidelines for validation of analytical methods. Comparison of different techniques in adequate concentration range add confidence in the analytical results.     

A vibrational spectroscopic study of the adsorption of 4,4′-bipyridyl by sepiolite and smectite group clay minerals from Anatolia (Turkey)

The adsorption of 4,4-bipyridyl by natural sepiolite and smectite group clay minerals (bentonite, hectorite and saponite) from Anatolia (Turkey) has been studied using vibrational spectroscopy. Investigation of Fourier-transform infrared and Fourier-transform Raman spectra of adsorbed 4,4-bipyridyl indicate the presence of chemisorbed species. However, any evidence for the generation of anionic species on the surface of the phyllosilicates has not been detected. It is proposed that the adsorbed bipyridyl molecules on sepiolite are centrosymmetric and H-bonded to the surface hydroxyls through both the nitrogen lone pairs as bidentate ligands. The adsorbed bipyridyl molecules on the smectite group clays are coordinated to exchangeable cations both directly and also indirectly through water as monodentate ligands. XRD patterns of the clays studied are also recorded.     

The state of conservation of painted surfaces in the presence of accelerated ageing processes monitored by use of FT-Raman spectroscopy and multivariate control charts

A new method has been developed for monitoring the degradation of paintings. Two inorganic pigments (ultramarine blue and red ochre) were blended with linseed oil and spread on canvas. Each canvas was subjected to simulated accelerated ageing in the presence of typical degradation agents (UV radiation and acidic solution). Periodically the painted surfaces were analysed by FT-Raman, to investigate the status of the surface. The data obtained were analysed by principal component analysis (PCA). Finally the Shewhart and cumulative sum control charts based on the relevant principal components (PC) and the so called scores monitoring and residuals tracking (SMART) charts were built. The method based on the use of PC to describe the process was found to enable identification of the presence of relevant modification occurring on the surface of the samples studied.Electronic supplementary material Supplementary material is available for this article at     

Density functional theory study of vibrational spectra, and assignment of fundamental vibrational modes of succinimide and N-bromosuccinimide

This work deals with the vibrational spectroscopy of succinimide and N-bromosuccinimide. The mid and far FTIR and FT-Raman spectra were measured in the condensed state. The fundamental vibrational frequencies and intensity of vibrational bands were evaluated using density functional theory (DFT) using standard B3LYP/6-31G(*) and B3LYP/6-311+G(**) methods and basis set combinations. The vibrational spectra were interpreted, with the aid of normal coordinate analysis based on a scaled quantum mechanical force field. The infrared and Raman spectra were also predicted from the calculated intensities. Comparison of simulated spectra with the experimental spectra provides important information about the ability of the computational method to describe the vibrational modes. Unambiguous vibrational assignment of all the fundamentals were made using the total energy distribution (TED).     

Fourier transform Raman spectral measurements of powdered quaternary mixtures of organic compounds: Exceptional pure component spectral reconstruction using band-target entropy minimization (BTEM)

Fourier transform Raman spectra of eight mixtures of four organic solids, namely dicyandiamide, melamine, acetamide and urea were measured. Matrices formed from these spectra were first subjected to singular value decomposition to obtain the right singular vectors. The right singular vectors were then subjected to blind source separation using band-target entropy minimization (BTEM), thus no a priori information (i.e. involving the nature of the components present, their spectra, nor their concentrations) was included in the analysis. The recovered pure component spectra are of exceptionally high quality and are consistent with pure reference spectra. Various empirical and statistical tests, such as the Euclidean norm and target transform factor analysis, were employed to assess the quality of the recovered spectra. The present results indicate the applicability of combined Raman and BTEM analysis for solid mixtures.     

Determination of ethanol in fuel ethanol and beverages by Fourier transform (FT)-near infrared and FT-Raman spectrometries

Fourier transform-near infrared (FT-NIR) and FT-Raman spectrometries have been used to design partial least squares (PLS) calibration models for the determination of the ethanol content of ethanol fuel and alcoholic beverages. In the FT-NIR measurements the spectra were obtained using air as reference, and the spectral region for PLS modeling were selected based on the spectral distribution of the relative standard deviation in concentration. In the FT-Raman measurements hexachloro-1,3-butadiene (HCBD) has been used as an external standard. In the PLS/FT-NIR modeling for ethanol fuel analysis 50 ethanol fuel standards (84.9-100% (w/w)) were used (25 in the calibration, 25 in the validation). In the PLS/FT-Raman modeling 25 standards were used (13 in the calibration, 12 in the validation). The PLS/FT-NIR and FT-Raman models for beverage analysis made use of 24 standards (0-100% (v/v)). Twelve of them contained sugars (1-5% (w/w)), one-half was used in the calibration and the other half in the validation. Different spectral pre-processing were used in the PLS modeling, depending on the type of sample investigated. In the ethanol fuel analysis the FT-NIR pre-processing was a 17 points smoothed first derivative and for beverages no spectral pre-processing was used. The FT-Raman spectra were pre-processed by vector normalization in the ethanol fuel analysis and by a second derivative (17 points smoothing) in the beverage analysis. The PLS models were used in the analysis of real ethanol fuel and beverage samples. A t-test has shown that the FT-NIR model has an accuracy equivalent to that of the reference method (ASTM D4052) in the analysis of ethanol fuel, while in the analysis of beverages, the FT-Raman model presents an accuracy equivalent to the reference method. The limits of detection for NIR and Raman calibration models were 0.05 and 0.2% (w/w), respectively. It has also been shown that both techniques, present better results than gas chromatography (GC) in evaluating the ethanol content of beverages.