Three-way-output response system by electric potential: UV-vis, CD, and fluorescence spectral changes upon electrolysis of the chiral ester of tetracyanoanthraquinodimethane

The newly prepared tetracyanoanthraquinodimethane (TCNAQ) derivatives 1a,b with a chiral auxiliary are good electron acceptors and exhibit weak circular dichroism (CD) based on the absorption of TCNAQ. The twin-type electron acceptor 1c with two TCNAQ units shows larger ellipticity by exciton coupling. UV-vis, CD, and fluorescence spectra were changed drastically upon electrochemical reduction of 1c, which demonstrates the unprecedented three-way-output response system.     

Electrochromic properties of WO<Subscript>3</Subscript> and WO<Subscript>3</Subscript>:P thin films

WO₃ and WO₃:P (5 mol% H₃PO₄) thin films were prepared using the sol-gel route and the electrochromic properties of the films were investigated using in situ spectroelectrochemical methods. The measurements were performed in propylene carbonate solution with 0.1 M LiClO₄ as electrolyte. During the cathodic polarization at –0.8 V a blue coloration is observed with a reversible variation between 14% and 84% of the transmittance at λ=633 nm. The kinetics for the bleaching process is faster for the WO₃:P film than for the undoped WO₃ film. Electronic Publication     

阳极氧化膜WO3（Ⅱ）：电显色的介质效应

用循环计时电量法、循环伏安法、电化学现场(in-situ)紫外可见反射光谱技术和光电流谱技术研究了溶剂和阳离子(H~+,Li~+)对阳极氧化膜WO_3电显色稳定性和过程的影响。从循环计时电量图可以测定表征膜稳定性的氢或锂的累积量和暂态周期数。实验发现W/WO_3/LiCLO_4乙腈溶液体系具有高的电显色稳定性。引起WO_3膜可逆电显色的H~+和Li~+离子的嵌-脱过程的界面电化学机理不同。着色态WO_3膜的色心是自由电子,其密度超过10~(21)/cm~3,生色机理是等离子体振荡。     

Electrochromic and structural characteristics of mesoporous WO<Subscript>3</Subscript> films prepared by a sol-gel method

The preparation of electrochromic films of mesoporous tungsten trioxide from tungstic acid and tungstic hexaethoxide precursors with the addition of an organic stabiliser via a sol-gel method is reported. These films have been structurally characterised and both the film morphology and crystalline composition of the films were found to be significantly dependent on the temperature at which the films were annealed and upon the choice of precursor. Films annealed at lower temperatures consisted of amorphous and hexagonal tungsten trioxide, whereas films annealed above 500 °C comprised solely of monoclinic WO₃. The electrochromic activity of the films was found to be equally dependent on method of preparation, and both the composition and the structure of the WO₃ films were shown to clearly influence the colouration efficiency of the films.Dedicated to Zbigniew Galus on the occasion of his 70^th birthday.     

NiOxHy薄膜的电致变色特性和机理

运用循环伏安和阶跃电位方法研究了Ni（OH）2粉末靶直流溅射沉积的NiOxHy薄膜电致变色特性．结合实时的光透射-时间变化，发现着色后的薄膜在零外电势下有一自发的消色过程，该过程可能对应着Li 的自发注入。着色没有自发过程，获取了着消色状态Ni2p3／2和O1s的XPS谱，表明在着色态镍被氧化，消色态镍被还原，相应地氧的化学环境发生改变．     

Electrochromism of NiO-TiO2 sol gel layers

Films of NiO-TiO₂ with Ni concentration of 100, 90, 87, 83, 75, 66, 50 and 33 mol% have been obtained via the sol-gel route by dip coating technique and sintered in air between 250 and 500°C using ethanolic sols of nickel acetate tetrahydrate (Ni(CH₃COO)₂·4H₂O) and titanium n-propoxide (Ti(O-CH(CH₃)₂)₄) precursors. Xerogels obtai- ned by drying the sols have been studied up to 900°C by thermal analysis (DTA/TG) coupled to mass and IR spectroscopy. The crystalline structure and morphology of the layers in the as deposited, bleached and colored states were determined by X-ray diffractometry, scanning electron microscopy and transmission electron microscopy Their electrochromic properties have been studied in 1 M KOH aqueous electrolyte as a function of the layer composition, thickness and sintering temperature. Deep brown colour with reversible transmittance changes have been obtained using cycling voltammetry and chronoamperometry processes. The best composition to get stable sols, a high reversible transmittance change and fast switching times (<10 s) was obtained with double NiO-TiO₂ layers 160 nm thick having 75% Ni molar concentration, and sintered between 300 and 350°C. The mechanism of coloration and morphology transformation of the layer during cycling are discussed in terms of an activation and degradation period. The results are in agreement with the accepted Bode model.     

A Conjugated Copolymer Bearing Imidazolium-based Ionic Liquid:Electrochemical Synthesis and Electrochromic Properties

An imidazolium-based ionic liquid(IL) modified triphenylamine derivative,namely 1-(4-((4-(diphenylamino)benzoyl) oxy)butyl)-3-methyl imidazole tetrafluoroborate(TPAC_6 IL-BF_4),was designed and synthesized,and further applied with 3,4-ethylene dioxythiophene(EDOT)to prepare conjugated copolymer P(EDOT:TPAC_6 IL-BF_4) via electrochemical polymerization.The cyclic voltammetry curves show that the copolymer P(EDOT:TPAC_6 IL-BF_4) possesses two pairs of redox peaks,which should be ascribed to the redox behaviors of EDOT and triphenylamine.The ultraviolet-visible(UV-Vis) absorption spectrum of P(EDOT:TPAC_6 IL-BF_4) exhibits one maximum absorption peak at 580 nm and a small shoulder characteristic peak at 385 nm under neutral state which are assigned to π-π~* conjugated structure of EDOT and triphenylamine.After being applied at the positive voltage,the copolymer color changes from dark blue to light blue,which is close to the color of poly(3,4-ethylenedioxythiophene)(PEDOT).Surprisingly,the copolymer P(EDOT:TPAC_6 IL-BF_4) shows shorter switching time of 0.37 s,0.30 s at 580 nm and 0.38 s,0.45 s at 1100 nm compared with PEDOT.It is more intriguing that the copolymer P(EDOT:TPAC_6 IL-BF_4) exhibits electrochromism even in free supporting electrolyte.The results confirm that the existence of imidazolium-based ionic liquid has an improvement on the ion diffusion properties and the switching time of conjugated polymer,which may provide a potential direction for the preparation of high-performance electrochromic materials.     

基于聚乙二醇接枝丙烯酸树酯光固化电解质的制备及性能研究

聚氧化乙烯(PEO)(聚乙二醇(PEG))和丙烯酸树脂在聚合物基电解质中具有很好的应用,本文通过紫外光引发单/双官能度的聚乙二醇接枝丙烯酸树脂单体聚合构建了离子电导率高、易于封装,可避免电解质泄漏的准固态聚合物电解质.通过调控聚乙二醇二甲基丙烯酸酯(PEGDA)和甲氧基聚乙二醇单甲基丙烯酸酯(PEGMA)2种单体的比例以及锂盐溶液的含量,成功制备出具有高离电导率的准固态聚合物电解质.采用傅里叶变换红外光谱仪(FTIR),电化学工作站对PEGMA/PEGDA基聚合物电解质进行表征,研究各组分比例对电解质的电化学性能影响.当PEGMA/PEGDA单体比例为75/25,锂盐溶液的占比为75%时,形成的薄膜状态电解质表现出1.96×10^?3 S·cm^?1的高离子电导率,较原始配比提高了14倍.将制备的电解质应用于电致变色器件,在580个变色循环后,器件依然可以实现稳定快速的颜色切换,2种颜色变换时间均在3 s以内,本文中研究的聚醚接枝丙烯酸树酯基电解质材料在电致变色器件中有较好的应用前景.     

Thin Film Counterelectrodes with High Li Charge Capacity for Electrochromic Windows

Summary.  Ce-V mixed oxide films have been deposited by RF sputtering with the aim of increasing the Li charge capacity of counter electrodes in smart windows. Such mixed oxides have shown high transmittance and optical passivity in the visible region. After electrode pre-conditioning by cyclic voltammetry, a good electrochemical reversibility in LiClO₄– propylene carbonate electrolyte was observed, and large Li-charge capacity under galvanostatic charging (up to 50 mCċcm⁻²) has been measured. The electrode charge capacity decreased after prolonged insertion-deinsertion cycles, whereas the photoptic transmittance remained about constant. After 800 cycles the Li-charge capacity decreased to 40 mCċcm⁻². The Li diffusion coefficient inside the films measured by electrochemical impedance and by galvanostatic titration ranged from 10⁻¹¹ cm²ċs⁻¹ to 10⁻¹³cm²ċs⁻¹. We observed that the Li charge capacity of the film electrodes is a function of the film deposition conditions, because it increased with the vanadium oxide concentration in the target and with the oxygen content in the sputtering atmosphere. Received June 23, 2000. Accepted (revised) August 7, 2000     

电泳沉积法制备V2O5薄膜的结构和性能

将V2O5溶胶电泳沉积在ITO导电基片上制备V2O5薄膜.运用X射线衍射和扫描电镜对薄膜的结构进行分析,通过紫外-可见光透射光谱和循环伏安法分别测试其光学和电化学性能.实验结果表明,电泳沉积V2O5薄膜具有致密的显微结构,薄膜厚度均匀、与基片的粘附性很好;循环实验中,薄膜呈现黄色到绿色的可逆变化,最大的透射率变化达到30%左右;薄膜具有很好的注入/退出可逆性和循环稳定性,50次循环效率仍能达到88.02%,并且循环后的薄膜与ITO导电玻璃的粘附性仍然很好,没有溶解现象;应用交流阻抗法计算Li+在V2O5薄膜着色过程的扩散系数为5.10×10-12cm2/s,表明该薄膜可以作为电致变色材料得到应用.