缅怀龚老一代“光纤人”,牢记使命,继续前进!纪念中国光学学会纤维光学与集成光学专业委员会成立36周年

20世纪50年代,光学纤维初问世之时,中国科学院学部委员龚祖同教授就敏锐地感觉到这种能"转弯抺角"传输光能的光纤是材料科技领域的一个重大革新!他决心在中国开展这方面的研究工作。1962年,龚老担任新成立的中国科学院西安光学精密机械研究所(后文简称"西安光机所")所长,立即组建了光学纤维研究室和光学玻璃研究组。     

陶瓷基功能材料载体纤维增强效果及机理

以陶瓷基功能材料载体为研究对象,按照其生产工艺配方,研究了纤维种类(莫来石、氧化铝、氧化锆)及其添加量对陶瓷基功能材料载体性能的影响.在相同实验条件且不影响其功能化参数前提下,将其与未添加纤维的空白试样力学性能进行对比.结果表明,试样经1200℃烧成后,相比莫来石与氧化铝纤维增强的陶瓷基功能材料载体,氧化锆纤维的增强效果最好.当氧化锆纤维的添加量为0.8 wt;时,试样的吸水率和气孔率均较低,分别为2.0;、4.0;,相比空白对比试样抗折强度增强了42.4;.     

变角度纤维复合材料层合斜板的颤振分析

假设纤维方向角沿层合板的长度方向线性变化，研究了变角度纤维复合材料层合斜板的颤振．通过坐标变换将斜板变换为正方形板，采用层合板表面连续变化的速度环量来模拟空气对其的作用，速度环量分布利用Cauchy积分公式计算．建立了系统的Lagrange方程并采用Ritz法得到了层合板的自振频率和颤振/不稳定性分离临界速度．通过数值算例验证了本文模型和方法的正确性和收敛性，分析了各个铺层内纤维方向角的变化对自振频率和颤振/不稳定性分离临界速度的影响．研究结果表明，通过纤维的变角度铺设，可有效地提高层合板的基频和颤振/不稳定性分离临界速度．经合理设计的变角度复合材料层合板具有抑制颤振的作用．     

PREPARATION AND CATALYTIC ACTIVITY OF BIOACTIVE FIBERS

Two kinds of water-soluble metallophthalocyanines, binuclear cobalt phthalocyanine （Co2Pc2） and binuclear ferric phthalocyanine （Fe2Pc2）, were synthesized through phenylanhydride-urea route and characterized by elemental analysis and FT-IR spectra. Binuclear metallophthalocyanine derivatives （Mt2Pc2） were immobilized on silk fibers and modified viscose fibers to construct bioactive fibers of mimic enzyme. Mt2Pc2 was used as the active center of bioactive fibers, viscose and silk fibers as the microenvironments. The catalytic oxidation ability of bioactive fibers on the malodors of methanthiol and hydrogen sulfide was investigated at room temperature. The experimental results indicated that the catalytic activity of such bioactive fibers was closely correlative to the types ofbioactive fibers and substrates.     

能谱法和催化光度法测定无机纤维中铁含量的比较研究

本文研究了铁(Ⅲ)在酸性介质中催化抗坏血酸(Vc或H2A)还原4-硝基-3’-甲基-氨基偶氮苯的褪色反应,拟定了反应的最佳条件,探讨了反应机理,建立了催化动力学测定痕量铁的新方法,该方法的检出限为2.98×10~(-11)g·mL-1,线性范围为0-200 ng·(25 mL)-1。比较了X射线能量色散谱法和催化光度法在玄武岩纤维样品中铁含量的测定,结果误差为2.89％。     

芳香酮与芳香醛及芳香胺的Mannich反应

醛、酮与芳香醛及芳香胺的 Mannich 反应,文献[1]曾报道在 HCl-EtOH 溶液中苯乙酮及甲醛与芳香胺的 Mannich 反应。本文在此基     

聚芳香杂环甲烯的三阶非线性光学效应与时间分辨光克尔效应

合成了一系列聚芳香杂环甲烯,包括聚吡咯甲烯和聚噻吩甲烯.采用四波混频法研究材料的共振三阶非线性光学效应(λ＝532nm),其共振二阶超分子极化率γ三阶非线性光学系数分别达到10^-30esu和10^-8esu.选择具有良好溶解性、成膜性的聚吡咯对二甲氨基苯甲烯(PPDMAB),采用飞秒时间分辨光克尔效应方法研究材料的非共振三阶非线性光学效应(λ=790nm).实验表明,翠绿亚胺碱溶液的光克尔信号仅表现一超快响应的成分,归功于π电子云扭转产生的非共振激发.PPDMAB的非共振二阶超分子极化率γ三阶非线性光学系数分别达到γ=5.78×10^-32esu和χ⁽³⁾=1.26×10^-10esu.     

Controlling the gain shape of Er^3＋—doped fluorozirconate fibre amplifier by a coherent field

We proposed a four-level system to explore the quantum interference effects on optical amplification.We found that the gain of the probe.including positions and values of gain peaks,can be adjusted by changing the coherent field and the incoherent pumping.At the same time,we can also modify the absorption profile of electromagnetically induced transparency by the incoherent pump.The results provide a method to flatten the gain of Erbium-doped fibre amplifiers.     

Simultaneous Measurement of Transverse Load and Temperature Using a single Long—Period Fibre Grating Element

A single long-period fibre grating (LPFG)element written by focused high-fraequency CO2 laser pulses is demonstrated for simultaneous measurement of transverse load and temperature.Temperature and transverse load can be directly measured by detecting the resonant wavelength shift and the resonant peak amplitude change of the LPFG,respectively,as there are two special circular orientations along the fibre axis where the resonant peak amplitude change of the LPFG has a linear relationship with the load applied and is insensitive to the resonant wavelength shift.Such a sensor could solve the cross-sensitivity problem between transverse load and temperature due to the unique feature of this type of LPFG,i.e. the wavelength-load-sensitivity of the LPFG strongly depends on loading orientations due to the non-uniform distribution of the refractive index on the cross-section of the LPFG caused by the thermal shock effect and other effects of the high-frequency CO2 laser pulses exposure method used.     

POROSITY CALCULATION OFMIXTURES OF FIBROUS PARTICLES

The initial forming of fiber blend to high green density, i.e. the packing of fibrous particles, is important to the reinforcement of composite materials. It is very useful to develop a general predictive method for the optimum selection of particle mixtures for the property control of ceramic or composite products. This paper presents such a mathematical model developed on the basis of the similarity analysis between the spherical and non-spherical particle packings and assesses its applicability to the packing of fibrous particles with discrete and/or continuous length distributions. The results indicate that the model can predict this packing system well and hence provide an effective way to solve various packing problems in the composite materials processing.