CFG桩复合地基应力比数值分析

本文采用有限元ANSYS程序对CFG桩复合地基的单桩桩体荷载传递规律、应力比及影响因素进行了分析,得出了减小应力比的方法和措施,对工程可起借鉴的作用。     

高性能复合材料的发展

文章介绍高性能纤维复合材料的发展概况及我所复合材料成型技术专业发展应重点加强的环节。     

化学气相渗透法制备碳化硅陶瓷复合材料

综述了化学气相渗透法制备连续纤维增强碳化硅陶瓷复合材料的过程，以及碳化硅陶瓷复合材料的性能及应用。     

复合材料壳体磁场固化技术

环氧树脂基复合材料及缠绕壳体在磁场中缠绕和固化的技术为前苏联独有,美国只作了一些验证研究。这种技术使得复合材料加工过程中树脂基体发生物理和化学变化,固化后力学性能显著改善,而且质量更加稳定。实现该技术的设备已在前苏联应用。磁场中固化还适用于树脂涂层和粘接层。     

混杂纤维缠绕壳体设计

应用网格理论，得到了固体火箭发动机混杂纤维缠绕壳体在内压作用下的平衡方程。给出了混杂纤维缠绕圆筒壁厚的计算公式。讨论了用模拟实验压力容器确定纤维发挥强度的问题。算例表明，文中给出的设计计算方法，可用于混杂纤维缠绕壳体的初步设计。     

电路特性仿真软件OrCAD／Pspice的应用

本文通过实例介绍了电路仿真特性软件OrCAD／Pspice在模拟电路、数字电路及数模混合电路几方面的应用。     

复合材料梁的热弯实验

为研制先进的导弹弹翼，用新研制的复合材料制成工字梁，模拟导弹飞行时翼梁受热弯条件进行实验，测出梁的温度和挠度随时间变化曲线，确定正常使用条件和失效形式，用此复合材料代替现役导弹的金属材料，可明显减重，改善性能。     

某机种复合材料构件的模态分析

 <正> 对某机种碳纤维复合材料垂尾加强肋、座舱盖、垂尾蒙皮等构件进行模态分析试验,所采用的试验方法如图1所示。     

搅拌铸造金属基复合材料铸锭的气孔率

阐述了降低气孔率是搅拌铸造工艺制备颗粒增强型金属基复合材料的关键技术。     

Effect of Counterface Material on Friction and Wear Behavior of Ni-Cr-W-Al-Ti-MoS_2 Composites

Ni-Cr-W-Al-Ti-MoS2 self-lubricating composites were prepared through the powder metallurgy (P/M) method. Their friction properties were investigated by a pin-on-disk tribometer in the range from the room temperature to 600 ℃. Alumina, silicon nitride and nickel-iron-sulfide alloys were selected as the counterface materials. Results indicate that the lowest friction coefficients under 0.22 can be obtained at 600 ℃ when rubbed against alumina. When rubbed against nickel-iron-sulfide alloys, are presented the lowest wear rates in the magnitude of 10-6 mm3/N·m, one order of magnitude lower than those when rubbed against ceramics. In the case of three rubbing pairs, the wear rates of the composite containing MoS2 present themselves inversely proportional to friction coefficients. With alumina ceramics used as a counterface, transfer films and glaze layers will form on the contact surface playing a main role in lubrication at high temperatures. However, when silicon nitride and nickel-iron-sulfide alloy are used, the lubricating transfer films appear not to be promi-nent.