Acid Deposition in the Tuscan Appennines During the Dry Period 1988-89

The typical parameters of acid precipitation are evaluated in the forest of Vallombrosa (Tuscan Appennines) during the dry period 1988-89. Individual rain events (dry and wet deposition) were sampled in a clearing of the forest and below the canopy of an evergreen tree as well as a deciduous broadleaf tree.

In atmospheric precipitation the pH values usually vary around 4.4, with neutralization in the hot season due to calcareous material from distant sources. Relatively large concentrations of Pb and Cd are found in rain, but only in a small amount in canopy leachate. Aluminium, manganese and iron are more significantly washed off than Pb and Cd.     

Tolerance of calluna vulgaris and peatland plant communities to sulphuric acid deposition

Critical loads offer a unique way of evaluating impacts of acid deposition by quantifying environmental sensitivity. The critical loads of acidity for UK peat soils have been based upon an arbitrary reduction in pH of 0.2 units. This chemical shift needs to be better related to adverse effects on sensitive biological receptors. It is known that effective precipitation pH equates closely to soil solution pH, and the latter is directly linkable to biotic effects of pH change. On continuation of a long-term experiment assessing impacts of simulated acid rain on peat microcosms in a realistic outdoor environment, Calluna vulgaris continued to flourish at acid deposition loads well above the existing critical load. Calluna plants were harvested and analysed, and acid deposition treatments to the microcosms continued to allow natural vegetation to regenerate. A diverse mixture of moorland plants and bryophytes established at acidity treatments well above the existing critical load, and only a very high acid load resulted in no natural regeneration. A critical effective rain pH value of 3.6 is suggested as a basis for setting critical loads. At this pH, Calluna grows well, and a healthy diverse vegetation community re-establishes when harvested. It is suggested that the peat critical load should be set at the acid load that, at any specific site, would result in a mean effective precipitation pH of 3.6.     

Fractionation of Cu, Pb and Zn in certified reference soils SRM 2710 and SRM 2711 using the optimized BCR sequential extraction procedure

Sequential extraction of metals from solid media is a common analytical tool used in environmental and exploration geochemistry. A number of procedures exist, but without harmonization and standardization, meaningful comparisons are tenuous without baseline data. A newly developed, standardized sequential extraction procedure (optimized BCR) was applied to two contaminated certified reference soils from Montana, US (SRM 2710 and SRM 2711) for Cu, Pb and Zn. Four operationally defined fractions were isolated, acid extractable, reducible, oxidizable, and residual (by aqua regia). Fraction-specific concentrations, percentages and recoveries for Cu, Pb and Zn were used to explore differences between the optimized BCR procedure and three other sequential extraction schemes with published data for SRM 2710 and 2711 (i.e. Tessier scheme, Geological Survey of Canada scheme and the original BCR scheme). Results indicate significant differences between the four schemes, even for schemes that are closely associated (i.e. the original and optimized BCR schemes). Order-of-magnitude fraction-specific concentration differences were observed, especially for Pb in the reducible fraction. Differences between schemes are worrisome because trends varied between metals, between fractions and between reference soils. These data reinforce the need for increased adoption of standardized sequential extraction procedures and further examination of different solid media.     

酸雨对种子萌发影响的实验研究

采用ＰＨ值２．５、３．０、３．５、４．５的酸雨处理小麦种子，观察种子的萌发率、平均萌发天数和萌发势。结果表明：酸雨对种子的萌发率和平均萌发无显著影响，但对种子萌发势有显著影响。     

玉溪市中心城区酸雨变化趋势分析

以1991年至2000年实测数据为依据，揭示了玉溪市中心城区10年来酸雨的变化规律及其发展趋势。     

抛丸处理在钢铁冷锻加工中的应用

钢铁冷锻加工中的磷化工序一般采用酸洗法去除毛坯上的氧化膜。现介绍用抛丸处理工艺替代酸洗方法,可以大幅度减少工业污染,降低生产成本,提高工艺质量。     

减缓贫水化过程的途径再议

根据贫水化的严重形势，应用水循环的原理，提出了减缓贫水化的几个主要途径，对解决城市淡水短缺有参考意义。     

浙江省酸雨的空间分布格局及其未来变化趋势预测

利用浙江省1992、2002年的酸雨监测数据,并利用RAINS-ASIA模型模拟了1990-2030年浙江省酸雨前体物(SO2)的排放量,以及酸沉降超临界负荷面积占研究区域面积比例的变化情况.结果表明,浙江省的酸雨分布范围不断扩大、危害程度不断加重;未来一个时期内,SO2排放量都会维持在较高的水平;酸沉降超临界负荷面积所占比例在经历较快的增长阶段之后,会维持在较为恒定的水平,并呈现出明显的时滞性.     

电子产品野外环境下温循加速载荷谱编制方法

目的 将电子产品在野外环境下日变化波动与季节差异明显的温度载荷编制成温循载荷谱和转换为加速载荷谱。方法 通过四点雨流计数法提取原谱中的载荷循环信息,对提取的循环信息进行分布拟合、相关性检验等统计分析,进而构建循环均值与范围值的联合概率密度函数,再运用概率密度法,编制出8×8二维环境载荷谱。在二维载荷谱基础上,编制出温循载荷谱,使用针对电子部件参数修正的加速方程转化为加速载荷谱。结果 利用野外作业现场1个作业周期内的气温纪录,提供了一套编制温循载荷谱和转换加速载荷谱的合理化流程和解决方案。结论 该制谱方法可以利用原始环境谱中绝大部分有效信息,较好地还原电子部件野外作业阶段经历的温度变化过程,为电子产品的加速寿命试验和使用寿命预测奠定基础。     

Effects of Acid Rain on Competitive Releases of Cd, Cu, and Zn from Two Natural Soils and Two Contaminated Soils in Hunan, China

Leaching experiments of rebuilt soil columns with two simulated acid rain solutions (pH 4.6–3.8) were conducted for two natural soils and two artificial contaminated soils from Hunan, south-central China, to study effects of acid rain on competitive releases of soil Cd, Cu, and Zn. Distilled water was used in comparison. The results showed that the total releases were Zn>Cu>Cd for the natural soils and Cd>Zn≫Cu for the contaminated soils, which reflected sensitivity of these metals to acid rain. Leached with different acid rain, about 26–76% of external Cd and 11–68% external Zn were released, but more than 99% of external Cu was adsorbed by the soils, and therefore Cu had a different sorption and desorption pattern from Cd and Zn. Metal releases were obviously correlated with releases of TOC in the leachates, which could be described as an exponential equation. Compared with the natural soils, acid rain not only led to changes in total metal contents, but also in metal fraction distributions in the contaminated soils. More acidified soils had a lower sorption capacity to metals, mostly related to soil properties such as pH, organic matter, soil particles, adsorbed SO₄ ²⁻, exchangeable Al³⁺ and H⁺, and contents of Fe₂O₃ and Al₂O₃.