Relationship between PM10 and PM2.5 levels in high-traffic area determined using path analysis and linear regression

The objective of this study was to determine the relationship between PM_(10) and PM_(2.5) levels as related to meteorological conditions and traffic flow using both a linear regression analysis and a path analysis. The Particulate matter(PM) samples were collected from Sukhumvit road, Bangkok, Thailand, at both open(104 samples) and covered(92 samples)areas along the road. Fifteen percent of all samples were separated before the statistical models were run and used for model validation. The results from the path analysis were more elaborate than those from the linear regression, thus indicating that meteorological conditions had a direct effect on the particulate levels and that the effects of traffic flow were more variable in open areas. The model also indicated that meteorological conditions had an indirect effect and that traffic flow had a direct effect on particulate levels in covered areas. The model validation results indicated that for open areas, the R~2 values were not very different between the path analysis and the linear regression model, but that the path analysis was more accurate than the linear regression model at very low PM concentrations. At high PM concentrations, the path analysis model also had a better fit than did the linear regression, so the predictions from the path analysis model were more accurate than those from the linear regression.     

我国淡水水域光合产物的气候生产力探讨

根据太阳辐射在水体中的有效分布、生长季水温和浮游植物光合生态特性等因子,模拟计算了我国大陆东部淡水水域的光合生产力、气候生产力及其季节变化的地理规律。从中得知,这些水域初级产物的年气候生产力主要呈纬向分布,由南向北递减,各地范围在 1.6-24.4gC/m²·a之间,长江以南是>15.0gC/m²·a的高值区,长城以北和四川盆地为<10.0gC/m²·a的低值区,因此,在气候生产力高值区有可能充分利用气候资源优势,开发低成本的自然淡水水域渔业;而在低生产力区,受自然资源的局限其自然捕鱼量需适量控制,因地制宜。     

安徽月山地区闪长岩类地质地球化学研究

安徽月山地区是长江中下游地区的重要成岩-成矿区段。本文通过岩石学、岩石化学和同位素地球化学等方面的研究，探讨和阐明了月山地区闪长岩类的形成环境、物质来源、源区特征、岩浆形成与演化机理等。     

水解酸化＋两级生物接触氧化处理高盐度水产品加工废水

介绍了“水解酸化＋两级生物接触氧化”处理水产品加工废水的运行效果和工程实例，结果表明：对C1^-浓度平均6000mg／L的高盐度水产品加工废水，系统对COD、SS、氨氮的去除率分别超过了88％、90％、85％，出水COD、SS、氨氮分别低于100mg／L、70mg／L、15mg／L，出水完全可以达到《污水综合排放标准》（GB8978—1996）一级排放标准。     

高强铝合金超塑挤压成形

主要介绍了工业牌号高强铝合金在供应态或经简单预处理后在通用油压机上超塑成形的实例,并分析探讨了非理想组织材料超塑成形中微观组织的变化。     

高镁铝合金在喷射成形过程中显微组织的变化

研究了高镁铝合金在喷射成形过程中显微组织的变化。沉积态高镁铝合金基体呈全部等轴晶组织并存在少量显微孔洞是沉积态组织的主要特征。分析了等轴晶组织和显微孔洞在喷射成形中生成的机制。     

超细煤矸石矿粉作天然橡胶补强填充剂的性能研究

以煤矸石为原料，通过超细粉碎、表面改性等深度加工，制取了一种新的橡胶补强剂，并对煤矸石作补强剂影响因素进行初步的研究，实验表明它能够取代或部分取代炭黑用作天然橡胶的补强剂。     

用预先热处理的材料加工长杆高强度双头螺柱

用预先热处理的材料生产长杆高强度双头螺柱新工艺 ,消除了长杆的热处理变形 ,降低了机械性能的不稳定性 ,提高了产品质量及螺纹联接的可靠性。     

高效菌活性污泥法处理分散染料废水实验研究

针对复合微生物的筛选和分离进行了研究 ,分离出处理分散染料废水起高效降解作用的 2株菌种。结果表明 ,2株高效菌对分散染料废水降解能力很强 ,与普通菌结果对比CODCr去除率提高 17% ,并且高效菌对废水浓度的耐受性也明显提高     

循环流化床锅炉床温控制方法

就目前电厂循环流化床锅炉运行中存在的床温波动问题，讨论了导致床温波动的因素，并针对性地提出了控制床温的一些措施。