Analysis of polycyclic aromatic hydrocarbons (PAHs) in airborne particles by direct sample introduction thermal desorption GC/MS

The technique of thermal desorption (TD)–GC/MS was evaluated for measuring airborne, 4–6 ring polycyclic aromatic hydrocarbons (PAHs) collected onto quartz filters. TD provides a more readily automated and sensitive alternative to traditional solvent extraction, decreasing the time/cost of analysis and reducing the risk of analyte loss or sample contamination. The developed method was successfully applied to the analysis of PAH standard solutions loaded on sorbent tubes packed with quartz wool and the graphitized carbon black sorbent Carbograph2. The optimized method showed high desorption efficiency over the whole range of target PAHs with good precision, linearity and sensitivity. The proposed method was verified on an urban dust Standard Reference Material (SRM 1649a); the experimentally determined concentrations agreed with the certified ranges (95% confidence limit) for all target compounds except benzo[a]anthracene, which fell just outside the narrow certified range. The desorption efficiency and the reproducibility of the method was evaluated by analysing pieces of real sample filters sampled from urban air for a period of 24 h. The results confirmed the homogeneity of the filter and showed high recovery efficiencies for all target PAHs.     

The Thermal Discharges From Nuclear Power Plants in Taiwan

The increasing use of sea water for industrial cooling presents a real threat to the ecological environment in the ocean. in Taiwan where many electric power plants along the coast take sea water for cooling, people are concerned seriously about nuclear power plants. There are three nuclear power plants in Taiwan. Each plant has two units for generating power. the first two are located along the northern coast of Taiwan. the third is located in Kenting National Park along the coast of southernmost Taiwan. the plants take sea water for cooling, and discharge their heated effluents to the ocean surface from the coast. the thermal effluents have variable effects on the ecological environment near the plants. Fishermen living near the power plants complain that the heated water affects the inshore fishery catch. in addition, the thermal water from the second plant is easily accumulated near the coastal zone to influence the nearby swimming area in the summer-time. the thermal water from the third plant bleaches or kills some corals in shallow water near the outlet, and this conflicts with the interests of Kenting National Park.     

红外和热分析联用在化工产品研究中的应用

运用实例论述了红外光谱分析与热分析联用在化工产品的产品开发和检测方面的应用。     

低浓度臭氧在含钴盐硅胶上的吸附研究

常压下对含钴盐硅胶进行低浓度臭氧的吸附实验，吸附达到饱和后用氮气作为载气加热解吸。结果显示，含钴盐的硅胶对臭氧具有较强的吸附能力；臭氧解吸量随着解吸温度的上升而增加；吸附了臭氧的含钴硅胶粒子在常温(313．15K)下可在60min内不问断解吸出臭氧。     

不锈钢板式热沉传热特性的实验与模拟研究

目的 研究流量、胀高及焊点排布方式对不锈钢板式热沉传热特性的影响。方法 搭建实验平台,加工出结构参数不同的板式热沉实验件,同时采用静力隐式算法建立相应的几何模型,通过实验与数值模拟相结合的方法,研究流量、胀高和焊点排布方式的变化对板式热沉热阻的影响规律,并分析热沉流道内部流场状态。结果 首先计算了6个工况下的热阻,发现实际换热量为540 W时,数值模拟与实验结果的最大相对误差不大于25%。然后分析了误差来源,最后得到了热沉全流道速度场与温度场的分布情况。结论 实验与模拟结果有较好的符合程度,证明了数值模拟方法的可靠性。在换热量相同时,板式热沉的热阻随流量与胀高的增大而减小,焊点为菱形排布的热沉传热性能相对更好。板式热沉内部的流场具有周期性,焊点使流体扰动增强,并形成射流和旋涡,起到了强化传热的效果。     

PDMDAAC改性膨润土对石油类污染物脱附行为的研究

石油类污染是水体环境主要的污染源之一,并且石油是不可再生资源,用吸附法处理含有石油类污染的废水有较好的处理效果.膨润土是一种优良的吸附剂,对其进行改性能提高其吸附石油类污染物的性能.改性膨润土在在含油废水处理方面得到广泛的应用,但其对石油类污染物脱附行为的研究还较少.本实验考察了搅拌时间、搅拌速度、pH、温度和盐度的变化对饱和吸附含油废水的聚二甲基二烯丙基氯化铵(PDMDAAC)改性膨润土脱附行为的影响,并通过正交实验优化了最佳脱附条件:搅拌时间为25 min,搅拌速度为200 r/min,pH为3,温度为35℃,在此条件下,脱附率可达92.05%.在最佳脱附条件下使其再生,并和原土进行了比较,通过脱附动力学研究了其脱附的过程.结果表明,饱和吸附含油废水的PDMDAAC改性膨润土在最优条件下,脱附率可达92.05%,可以用来回收石油;再生得到的改性膨润土用于处理含油废水,去除率在82.84%左右,可以重复使用来处理含油废水;准二级脱附动力学能较好地描述脱附过程.旨在探索改性膨润土的吸附及脱附的规律, 为膨润土用于含油废水处理奠定基础.     

污泥厌氧消化的热预处理研究进展

热预处理能够提高后续厌氧消化效率,改善污泥脱水性能。对国内外污泥热预处理的研究进行了归纳,包括热与碱、超声波和氧化法的联合预处理,重点介绍了热预处理对污泥溶解作用、厌氧消化、脱水性和流变性的影响,分析了热处理与厌氧消化整体的能量平衡。最后提出了热预处理研究中存在的问题,并展望了今后的发展趋势。     

稻壳沸石的合成及其对氨氮的吸附/脱附动力学

以稻壳为原料采用水热合成法制备了沸石,运用XRD、SEM和BET技术表征了合成沸石的结构特性。通过静态实验,研究了合成沸石对氨氮的吸附和脱附机理。结果表明：延长水热合成的晶化时间有利于合成沸石晶核的形成,合成沸石比表面积为28.418 m2·g-1,平均孔径为31.1 nm,孔体积为0.22 m3·g-1,属NaP型微介孔吸附材料。伪二级吸附动力学模型更适合描述合成沸石对氨氮的吸附过程,由伪二级吸附动力学模型拟合得到的平衡吸附量与实测值相差在1.0%以内。颗粒内扩散速率是由膜扩散和内扩散共同控制,颗粒内扩散速率常数kp随初始浓度的增加而提高。MNaOH/ANMNaOH/AN的增大,温度对脱附的促进作用变得越来越小,当MNaOH/AN>1.21时,氨氮的脱附率可达92.1%。伪二级脱附动力学模型的拟合结果优于伪一级,碱当量高于临界值之后对提高合成沸石脱附氨氮的效果不大。     

膨胀石墨对U(VI)的吸附特性

高温加热可膨胀石墨制得膨胀石墨,用于去除溶液中的U(VI)。通过静态吸附实验,研究了初始pH、吸附剂投加量、U(VI)初始浓度、温度以及吸附时间对膨胀石墨吸附U(VI)效果的影响。实验结果表明,膨胀石墨吸附U(VI)的最佳pH为6.5,在温度为30℃,投加量为2.0 g/L,U(VI)初始质量浓度为10 mg/L时,对U(VI)的去除率达到98.08%,反应在4 h达到平衡。Langmuir等温吸附模型和准二级动力学模型较好地拟合了吸附过程,30℃时饱和吸附量为27.03 mg/g;热力学分析表明,膨胀石墨对U(VI)的吸附是自发的放热反应。比表面积测试、扫描电镜、X射线能谱与傅里叶红外光谱分析结果表明,膨胀石墨对U(VI)的吸附以物理吸附为主,表面官能团起辅助作用。解吸实验证明,膨胀石墨是可重复利用的吸附剂。     

土壤电阻加热技术原位修复有机污染土壤的关键问题与展望

为解决我国近年来重污染企业搬迁遗留的有机污染土壤问题,土壤电阻加热修复技术(electrical resistance heating,ERH)等热处置技术日益受到重视。ERH是目前修复挥发性、半挥发性有机污染土壤最具有潜力的原位热修复技术之一,其污染物去除率及土壤性质变化是用以评估该土壤修复技术的核心指标。在查阅文献的基础上,系统分析了热处置及电阻加热技术相关原理与适用范围,并对ERH处置过程中土壤性质可能发生的变化进行了深入讨论,以期为我国有机污染土壤原位热修复技术的推广和应用提供参考。