Using chemical process simulation to design industrial ecosystems

Chemical process simulation (CPS) software has been widely used by chemical (process) engineers to design, test, optimise, and integrate process plants. It is expected that industrial ecologists to bring these same problem-solving benefits to the design and operation of industrial ecosystems can use CPS. This paper provides industrial ecology researchers and practitioners with an introduction to CPS and an overview of chemical engineering design principles. The paper highlights recent research showing that CPS can be used to model industrial ecosystems, and discusses the benefits of using CPS to address some of the technical challenges facing companies participating in an industrial ecosystem. CPS can be used to (i) quantitatively evaluate and compare the potential environmental and financial benefits of material and energy linkages; (ii) solve general design, retrofit, or operational problems; (iii) help to identify complex and often counter-intuitive solutions; and (iv) evaluate what-if scenarios. CPS should be a useful addition to the industrial ecology toolbox.     

安徽月山地区闪长岩类地质地球化学研究

安徽月山地区是长江中下游地区的重要成岩-成矿区段。本文通过岩石学、岩石化学和同位素地球化学等方面的研究，探讨和阐明了月山地区闪长岩类的形成环境、物质来源、源区特征、岩浆形成与演化机理等。     

Microwave digestion method in environmental analysis

Ｍｉｃｒｏｗａｖｅｄｉｇｅｓｔｉｏｎｍｅｔｈｏｄｉｎｅｎｖｉｒｏｎｍｅｎｔａｌａｎａｌｙｓｉｓ￥ＺｈａｎｇＹｕｅ（ＷａｄｓｗｏｒｔｈＣｅｎｔｒｅ，ＮｅｗＹｏｒｋＳｔａｔｅＤｅｐａｒｔｍｅｎｔｏｆＨｅａｌｔｈＳｃｈｏｏｌｏｆＰｕｂｌｉｃＨｅａｌｔｈ，Ｓ...     

从动力地质作用原理探讨沙漠化成因

大规模沙漠化从岩石记录中可以追溯到中生代中期，第四纪以来南北两半球各存在一条中纬度沙漠带，中国的沙漠化是这个全球沙漠化进程的一个组成部分。沙漠化是在地质演化过程中受内、外动力地质作用联合控制的地质事件。是岩石圈与大气圈、生物圈及水圈强烈作用在地壳表层形成的一种特殊地质现象。这种现象的形成与演化是漫长的和具有周期性的，不会因为局部的条件变化而发生整体意义上的突变。人类活动是局部的，在整个地球沙漠化进程中只是起到一个加速剂的作用。沙漠化过程可分为3个阶段，即物理风化与沙源积聚阶段、风沙作用阶段和沙漠化阶段。沙漠期后沙丘沙经过固化生草、胶结成岩阶段后即形成风成砂岩。     

生物作用强化城市污水一级处理工艺研究

提出生物作用强化城市污水一级处理工艺 ,探讨利用生物絮凝吸附作用独立承担城市污水处理任务的可行性、影响因素及运行参数。试验证明 ,处理城市污水 ,当HRT为 1 1h ,DO为 1 0mg L ,CODCr污泥负荷为 3 4～ 4 0kg kg·d时 ,CODCr、BOD5和SS去除率分别为 6 8%～ 78%、6 5 %～ 72 %和 75 %～ 85 %。     

加压活性炭生物膜法处理DSD有机废水

采用加压活性炭生物膜法处理以对硝基甲苯磺酸盐为主的难降解的有机废水的研究,是在活性炭生物膜法处理有机废水基础上发展起来的新技术。本实验结果表明,在加压9.8×10~4Pa(1kgt/cm~2)的条件下,COD_(Cr)去除率为62％～70％,比常压活性炭生物膜法高20％～25％;其容积负荷Nv=1.7～2.9kgCOD/m~3·d,比一般活性污泥法高3～6倍。     

循环悬浮式半干法烟气脱硫技术在煤粉锅炉中的应用

半千法烟气脱硫技术目前在国内正在快速推广应用中，但成功的实例还较少，还存在系统不可靠，技术指标达不到，故障率高等问题。介绍了循环悬浮式半千法烟气脱硫技术及首次在煤粉锅炉中应用的烟气净化新工艺：静电预除尘＋循环悬浮式半干法烟气脱硫＋布袋除尘，论述了净化原理及在我厂的实际应用情况。     

炼油厂"三泥"离心脱水处理研究

通过对目前炼油厂“三泥”性状的调查，利用已有污泥处理设施进行了炼油厂“三泥”离心分离的现场试验，并分析了影响“三泥”离心分离处理工艺的主要因素，发现了离心机转速和絮凝剂投加量对“三泥”离心分离的有关规律和最佳操作条件，在此基础上，提出了适合炼油厂“三泥”处理系统的优化方案。     

OPTIMIZATION MODELING OF A NEW FACILITY FOR THE CALIFORNIA STATE WATER PROJECT1

ABSTRACT: A non-linear optimization model is applied to the California State Water Project (SWP) and portions of the Central Valley Project (CVP). The model accounts for the major hydrologic, regulatory, and operational features of both projects. The model maximizes long-term SWP yields over a 70-year period, using a quarterly time step. The potential for increased yield associated with a proposed facility improvement is evaluated with the model. The proposed facility is an extension of the Folsom-South Canal, which would allow water to be conveyed from the American River below Folsom Reservoir into New Melones Reservoir on the Stanislaus River or into the California Aqueduct. Model results indicate that extension of the Folsom-South Canal has the potential to increase SWP yields by 13 percent.     

固硫剂制备工艺探讨

探讨了循环流化床锅炉脱硫方法中固硫剂的制备工艺，对几种石灰石破碎设备及工艺进行了分析比较，通过柱磨机粉磨石灰石的工业试验，了解其产品粒度分布，从而择优确定固硫剂制备工艺流程。