Stability of a Coal Waste Artificial Reef

The feasibility of using U.K. coal-fired power station waste materials for artificial reef production is being examined. in June, 1989, an experimental artificial reef was constructed in Poole Bay, off the central south coast of the U.K., using three different mixtures of pulverised fuel ash (PFA), flue gas desulphurisation (FGD) gypsum and slurry, stabilized with cement and formed into blocks. Fifty tonnes of 40 × 20 × 20 cm blocks were formed into eight conical reef units replicating three different PFA/gypsum mixtures and one concrete control. the reef structure is 10m below chart datum on a flat sandy sea-bed.

Combustion of coal concentrates the heavy metal content in the resultant ash. the purpose of stabilization of the ash as blocks is twofold: to immobilize heavy metals (or other components) and to provide hard substratum for the attachment of organisms. to examine the effectiveness of this stabilization and hence the environmental compatibility of the block materials, heavy metal (Cd, Cr, Cu, Pb, Mn, Ni, Zn) content of the blocks has been monitored routinely over two years, to determine leaching rates. Sectional profiles indicate partial replacement of calcium content by magnesium. Associated with this there has also been some redistribution of heavy metals. Only in the case of cadmium has there been a detectable loss from the surface of blocks. Chromium and manganese concentrations appear to have increased. the metal content of the reef epibiota (including ascidians, Ascidia mentula; hydroids, Halecium spp.; bryozoans, Bugula spp. and red algae) growing on the ash blocks has been compared to that of epibiota attached to the concrete controls and surrounding sea-bed. to date no evidence of excess bioaccumulation of metals has been detected.

The physical integrity of the ash reef blocks has been maintained. There is evidence that the blocks are increasing in compressive strength.

An indication of the fishery enhancement potential of the experimental structure is given by the presence of eight commercially fished species (crustaceans and molluscs) including lobsters (Homarus gammarus).     

Levels of tin in core sediments along the Alexandria Coast, Egypt

Tin concentrations were determined in surface and core sediments from three hot spots along the Alexandria coast, namely: Abu-Qir Bay, Eastern Harbour, and Western Harbour. The mean concentrations in surface sediment were 2.434, 3.212, and 5.572 μg/g dry weight for Abu-Qir Bay, Eastern Harbour, and Western Harbour, respectively. A sharp decrease in tin level in core sediments with depth was observed in almost all locations except for core 4 in Abu-Qir Bay and core 17 in the Eastern Harbour, where the sub-sample at the 5 cm level recorded the highest tin concentrations.     

Biological Activity in a Heavily Organohalogen-Contaminated River Sediment (8 pp)

Background, Aims and Scope Sediments of the Spittelwasser creek are highly polluted with organic compounds and heavy metals due to the discharge of untreated waste waters from the industrial region of Bitterfeld-Wolfen, Germany over the course of more than one century. However, relatively few data have been published about the chloroorganic contamination of the sediment. This paper reports on the content of different (chloro)organic compounds with special emphasis on polychlorinated dibenzo-p-dioxins and dibenzofurans (PCDD/F), and chlorobenzenes. Existing concepts for the remediation of Spittelwasser sediment include the investigation of natural attenuation processes, which largely depend on the presence of an intact microbial food web. In order to gain more insight in terms of biological activity, we analyzed the capacity of sediment microflora to degrade organic matter by measuring the activities of extracellular hydrolytic enzymes involved in the biogeochemical cycling of carbon, nitrogen, phosphorus and sulfur. Furthermore, the detection of physiologically active bacteria in the sediment, particularly of those known for their capability to reductively dehalogenate organochlorine compounds, illustrates the potential for intrinsic bioremediation processes. Methods PCDD/F and chlorobenzenes were analyzed by gas chromatography(GC)/mass spectrometry and GC/flame ionization detection, respectively. The activities of hydrolytic enzymes were determined from freshly sampled sediment layers using 4-methylumbelliferyl (MUF) or 7-amino-4-methylcoumarin-conjugated model compounds and kinetic fluorescence measurements. Physiologically active bacteria from different sediment layers were microscopically visualized by fluorescence in situ hybridization (FISH). Specific bacteria were identified by 16S rRNA gene amplification and sequencing. Results and Discussion The PCDD/F congener profile was dominated by dibenzofurans. In addition, the presence of specific tetra and pentachlorinated dibenzofurans supported the assumption that extensive magnesium production was one possible source for the high contamination. A range of other chloroorganic compounds, including several isomers of chlorobenzenes, hexachlorocyclohexane and 1,1,1-trichloro-2,2-bis (p-chloro-phenyl)ethane (DDT), was present in the sediment. Activities of extracellular hydrolytic enzymes showed a strong decrease in those sediment layers that were characterized by high contents of absorbable organic halogen (AOX), indicating disturbed organic matter decay. Interestingly, an abnormal increase of cellulolytic enzyme activities below the organochlorine-rich layers was observed, possibly caused by residual cellulose from discharges of sulfite pulping wastes. FISH revealed physiologically active bacteria in most sediment layers from the surface down to the depth of about 60 cm, including members of Desulfitobacterium (D.) and Sulfurospirillum. The presence of D. dehalogenans was confirmed by its partial 16S rRNA gene sequence. Conclusions Results of chemical sediment analyses demonstrated high loads of organochlorine compounds, particularly of PCDD/F. Several years after stopping the waste water discharge to Spittelwasser creek, this sediment remains a main source for pollution of the downstream river system by way of the ongoing mobilization of sediment during high floods. As indicated by our enzyme activity measurements, the decomposition potential for organic matter is low in organochlorine-rich sediment layers. In contrast, the comparably higher enzyme activities in less organochlorine-polluted sediment layers as well as the presence of physiologically active bacteria suggest a considerable potential for natural attenuation. Recommendations and Perspectives From our data we strongly recommend to explore the degradative capacity of sediment microorganisms and the limits for in situ activity towards specific sediment pollutants in more detail. This will give a sound basis for the integration of bioremediation approaches into general concepts to reduce the risk that permanently radiates from this highly contaminated sediment. Submission Editor: Dr. Henner Hollert (Henner.Hollert@urz.uniheidelberg.de)     

海洋现代沉积速率~（210）Pb－~（210）Bi法的射线测定研究

本文主要介绍了用~（２１０）Ｐｂ─~（２１０）Ｂｉ法测定海洋现代沉积速率和数据处理方法的研究。该方法测定的结果与~（２１０）Ｐｂ─~（２１０）Ｐｏ法和阴离子交换－ＥＤＴＡ纯化－硫酸钡镭沉淀－α计数法（简称~（２２６）Ｒａ法）以及厦门大学海洋系经研究改进的分离、纯化~（２１０）Ｐｂ的离子交换法的测定结果相当吻合。     

HISTORICAL TRENDS IN SEDIMENTATION RATES AND SEDIMENT PROVENANCE,FAIRFIELD LAKE,WESTERN NORTH CAROLINA1

Sedimentation rates and sediment provenance were examined for lacustrine sediments deposited in Fairfield Lake, western North Carolina, during the past 111 years. Stratigraphic, radionuclide, and cartographic data indicate that sedimentation rates have increased several fold during the past three decades in response to localized development. The magnitude of increased sedimentation was surprising given limited development within the basin: 0.12 to 0.68 buildings/ha in 2000 in those parts directly delivering sediment to the dated cores. Thus, the analysis illustrates the potential sensitivity of watersheds in the southern Appalachians to changes in land cover. An approach that combined geochemical fingerprinting with sediment mixing models was subsequently evaluated to determine its ability to accurately estimate the contribution of sediment from (1) major bedrock formations that underlie the watershed and (2) potential sources associated with four land cover categories. Sediment sources in both analyses proved difficult to geochemically fingerprint to greater than 90 percent accuracy using data on acid‐soluble metals and selected isotopes of lead (Pb). The relative contributions of sediment from delineated sources, estimated by the mixing models, generally corresponded with known temporal and spatial patterns of land cover. However, the models were plagued by two significant problems — the chemical alteration of sediments as they were transported through upland streams to depositional sites within the lake and the loss of elemental mass. Thus, future investigations using the fingerprinting approach in this area of intense weathering, and presumably others, will need to modify the existing methods to more accurately elucidate changes in sediment provenance related to development.     

淀山湖沉积物的污染特征及其风险评价

对上海淀山湖代表性表层沉积物中的重金属、磷、PAHs及OCPs等典型污染物质进行了分析和风险评价。其中总磷含量范围为1 072~1 229 mg/kg,以无机磷为主,生物可利用磷含量较高,对水体富营养化具有潜在的威胁。重金属Cu、Cr、Zn、Pb的平均含量分别为25.5、34.1、244.5、32.2 mg/kg,污染程度大小依次为ZnPbCuCr,潜在生态风险程度依次为PbCuZnCr。∑PAHs、∑OCPs含量范围分别为617.1~843.2 ng/g以及22.03~28.94 ng/g,风险结果表明PAHs和大部分OCPs均未超出ERL值,生态风险水平低。     

海洋环境服役发动机腐蚀损伤分析及防护能力提升建议

通过我国航空发动机海洋环境服役过程中腐蚀情况的调研,结合文献资料,分析腐蚀防护与控制技术的应用现状,提出未来工作建议。目前海洋环境服役航空发动机的腐蚀防护与控制缺少贯穿方案论证、设计研制、使用维修等全寿命周期各阶段的综合考虑,制约解决腐蚀问题的关键技术没有突破,研制生产过程中,存在耐腐蚀性能评估不合理的问题。应开展腐蚀智能监测、识别、模拟仿真等技术的研发与应用,实现海洋环境服役发动机的腐蚀损伤监控与预警,构建发动机腐蚀环境适应性试验评价技术体系,满足新体制下装备试验鉴定工作要求。急需开展长寿命防护涂层技术、维护技术专项研究,以适应严酷海洋大气环境和航空动力装置高可靠性研制要求。     

直升机腐蚀原因分析及全寿命周期防护技术

通过直升机实际使用过程中暴露的腐蚀问题,分析了直升机全寿命期的腐蚀防护应对方法和思路。对陆地环境和海洋环境使用直升机的腐蚀情况进行了汇总,并对直升机典型腐蚀问题及改进措施进行了研究。在此基础上,进一步分析了导致直升机发生腐蚀的环境、设计、生产、制造、维护等原因,总结了直升机易腐蚀部位、腐蚀特点以及危害性。提出了采用“设计保证、生产实现、维护保持”的综合手段来提升直升机全寿命期的腐蚀防护能力。最后,对外场维护维修过程中需要重点关注的腐蚀控制手册、清洗、涂镀层修复、密封剂/缓蚀剂等问题进行了思考和分析,提出了需加快推进先进的防腐技术在直升机防腐中的应用,对有效开展直升机全寿命周期的腐蚀防护工作具有一定指导意义。     

青岛海洋环境碳纤维复合材料与低合金钢电偶腐蚀研究

目的 探究碳纤维复合材料在舰船应用时与金属材料的电偶腐蚀问题。方法 针对一种典型舰船用碳纤维增强乙烯基树脂复合材料,在青岛海洋大气环境下开展0.5、1、1.5、2 a期的自然曝晒试验,进而采用电化学分析手段考察其与低合金钢的电偶腐蚀效应,结合老化机制探究碳纤维复合材料的老化行为对其与钢电偶腐蚀的影响。结果及结论 在青岛大气环境曝晒不同周期的复合材料试样,开路电位与低合金钢相差较大,存在较高的电偶腐蚀倾向。随曝晒时间的延长,复合材料表面微裂纹不断产生、扩展,导致电化学反应活性点增多,两者电偶电流密度随之增大。在青岛海洋大气环境下暴露2 a后,碳纤维增强乙烯基树脂复合材料与低合金钢的电偶电流为0.356 9 μA/cm²,两者的电偶腐蚀敏感性达到B级。     

空空导弹海洋大气自然环境试验研究

针对空空导弹随航母服役需求和海洋大气自然环境适应性风险,结合相关标准和研制经验,对空空导弹海洋大气自然环境试验方案设计流程、方法及要点进行了研究。提出了一套空空导弹海洋大气自然环境试验方案,可用于指导新研型号科学有效地开展自然环境试验,为回答空空导弹海洋大气自然环境适应性指标提供了支撑。空空导弹应系统策划海洋大气自然环境试验,以尽早暴露问题,实现产品设计改进,为上舰环境适应性的提高奠定基础。同时,还应大力开展自然加速环境试验技术和动态自然环境试验技术研究工作。