装配式贝雷桁架门机设计

本文就装配式贝雷桁架门机的设计要点作了简要的介绍,并对其拼装的技术质量提出要求。     

风雨操场综合楼改造工程设计与施工

某风雨操场综合楼改造工程拆除了辅助用房及支撑网架屋面的西根框架柱改造成为球场看台。设计采用钢结构桁架托换技术，将屋面荷载转移至两侧的保留柱上，跨度拓展到30m。钢桁架与框架柱上安装的牛腿铰接连接，通过牛腿背面框架柱间的混凝土墙平衡牛腿传来的弯矩。在施工安装过程中合理地利用待拆除框架柱，保持屋面的完整性提升屋面，达到了对屋面扰动影响最小的目的。     

大跨度钢桁拱桥节点疲劳性能试验研究

重庆朝天门大桥是当今世界第一大跨度拱桥,其下弦节点直接承受公路荷载与轻轨荷载的双重作用,下弦节点连接处应力幅大,目前大跨度钢桥中未曾有类似的设计及试验,因此,该文对其下弦节点连接进行了高周疲劳试验以确定其连接的可靠性。首先通过相关规范及朝天门大桥的交通量确定出模型的试验荷载,并完成从实桥节点到模型的转换,然后对模型进行正常设计荷载下的200万次疲劳试验,该试验验证了设计寿命期内朝天门大桥节点连接的安全性,并用空间有限元分析结果验证了试验数据的真实性。最后进行了该模型的疲劳破坏试验,得出了这类节点的疲劳破坏规律,为该类桥梁以后的设计及监测提供了数据及参考意见。     

桁架结构形状优化的粒子群优化算法

为解决有应力约束、几何约束以及局部稳定性约束的桁架结构的形状优化设计,将粒子群优化(PSO)算法应用于桁架结构的形状优化设计.首先详细介绍了原始PSO算法的基本原理,然后引入压缩因子改进了原始的PSO算法,并提出了合理的参数设置值.优化计算过程中,综合考虑了节点坐标和截面面积等两类不同性质的设计变量.最后对几个经典问题进行了求解,并与传统的优化算法进行了比较.数值结果表明,改进的PSO算法具有良好的收敛性和稳定性,可以有效地进行桁架结构的形状优化设计.     

Stability control of gate groups in deep wells

In order to study stability control methods for a deep gate group under complex stresses, we conducted field investiga-tions and analyses of reasons for damage in the Xuzhou mining district. Three reasons are proposed: deep high stress, improper roadway layout and support technology. The stability control countermeasures of the gate group consist of an intensive design technology and responding bolt-mesh-anchor truss support technology. Our research method has been applied at the -1000 m level gate group in Qishan Coal Mine. Suitable countermeasures have been tested by field monitoring.     

常州会展中心与训练馆钢管桁架屋盖结构设计

以常州体育会展中心的会展中心与训练馆为例,介绍了钢屋盖的结构设计过程,并对屋盖结构选型、屋盖体系布置、屋盖计算分析、节点设计等方面进行了详细的阐述。     

青岛大剧院工程大跨度钢桁架综合施工技术

通过对青岛大剧院工程大跨度钢桁架综合施工技术的研究,对大跨度钢结构吊装涉及到的吊装机械选型、结构分段、吊点布置、临时支撑处理等难点进行分析,通过全过程仿真模拟、施工过程监测及分析,进行吊装方案的优化,很好地保证了安装施工过程中的精度.     

木桁架搁栅楼盖振动性能研究

为了深刻理解木桁架搁栅楼盖振动性能与居住者感受之间的关系,对木桁架搁栅楼盖振动性能进行了试验研究和主观评价。研究发现木桁架搁栅楼盖的基本自振频率、静态挠度和振动加速度等指标与居住者的感受有密切关系;通过在木桁架搁栅楼盖中增加横撑和板条撑等加强附件能显著改善了其振动性能;建议木楼盖减振设计体系中将静态挠度和基本自振频率作为设计指标,而评价体系中除静态挠度和基本自振频率外增加峰值加速度这一评价指标。     

大型桁架临时固结法吊装工法

超高、超重、超长桁架吊装施工的桁架稳定性,历来受到施工单位高度重视,能否在节省费用的同时做到施工安全及线性美观,是施工企业能否做到经济、迅速、高效的关键。京能水洞沟电厂输煤系统7号栈桥工程钢桁架架空结构吊装中,采用了新的施工工法,取得了良好的效果,为相似工程的施工积累了宝贵的经验,值得在类似结构的工程施工中借鉴。     

Vertical load capacities of roof truss cross members

Trusses used for roof support in coal mines are constructed of two grouted bolts installed at opposing forty-five degree angles into the roof and a cross member that ties the angled bolts together. The load on the cross member is vertical, which is transverse to the longitudinal axis, and therefore the cross member is loaded in the weakest direction. Laboratory tests were conducted to determine the vertical load capacity and deflection of three different types of cross members. Single-point load tests, with the load applied in the center of the specimen and double-point load tests, with a span of 2.4 m, were conducted. For the single-point load configuration, the yield of the 25 mm solid bar cross member was nominally 98 kN of vertical load, achieved at 42 cm of deflection. For cable cross members, yield was not achieved even after 45 cm of deflection. Peak vertical loads were about 89 kN for 17 mm cables and67 kN for the 15 mm cables. For the double-point load configurations, the 25 mm solid bar cross members yielded at 150 kN of vertical load and 25 cm of deflection. At 25 cm of deflection individual cable strands started breaking at 133 and 111 kN of vertical load for the 17 and 15 mm cable cross members respectively.