碳纤维缠绕复合材料在潜水外压容器上的应用

在铝合金圆筒体外以浸渍树脂碳纤维进行缠绕复合增强，增强后的筒体耐静水外压能力大幅度提高；整体缠绕的全复合材料筒体，在耐静水外压能力及减轻自身重量方面也获得了明显的效果。此外，在铝合金细长圆管的外壁复合缠绕碳纤维，能有效地提高圆管对轴向压载荷的抗失稳与抗屈曲破坏能力。     

日产PD6型柴油机气缸穴蚀原因浅析及对策

本文分析日产车用PDG型柴油机的结构特点及其缸套穴蚀的形成原因、危害和检查与判断方法,并提出在使用中应采取的预防措施。     

Heat induced transition of a stable vortex street

A combined numerical and experimental investigation is presented showing the effect of heat on the stability of a horizontal vortex street for Re_D=75 and Ri_D between 1 and 2. Detailed 2D-HiRes PV experiments are compared with 2D numerical results. The results show that an early transition to 3D of the vortex street takes place for Ri_D>1. Furthermore, the location at which the 2D wake becomes essentially 3D turns out to be dependent on Ri_D. For an increasing addition of heat (increasing Ri_D), this location is shifted into the direction of the cylinder. By applying 3D measuring techniques, such as 3D-PTV and 3D visualisation techniques, the transition process and the behaviour downstream of the transition point are investigated.     

建议气瓶充装前增加气瓶音响检查项目

高压无缝钢瓶的充装前检查 ,在现有的标准或规程中是没有音响检查这一项内容的 ,只有在气瓶定期检验时 ,根据国家标准GB 130 0 4— 1999《钢质无缝气瓶定期检验与评定》中有音响检查的要求 ,但气瓶定期检验周期为二至五年。有关资料表明 ,当氧气瓶中进入海水或其他腐蚀物 ,则该瓶使用半年至一年后 ,瓶体被腐蚀处的剩余壁厚不到 2mm ,这样的气瓶如混入充装站 ,在充装过程中就很有可能发生事故。所以 ,只在气瓶定期检验中才进行一次音响检查 ,已经不能满足气瓶充装安全生产的需要。气瓶充装前的音响检查 ,可引用GB 130 0 4—1999《钢质无缝…     

两个同心施转圆柱间的Taylor问题

本文推导了在修正双极坐标系下的Ｎａｖｉｅｒ－Ｓｔｏｋｅｓ方程和讨论了它的基本流的扰动解     

CY4102BZQ柴油机机体模态分析

以东风朝阳柴油机厂最新开发的CY4102BZQ柴油机机体为研究对象，利用Pro／E三维软件和I-DEAS有限元软件建立了结构的实体模型和有限元模型，进行了机体的模态分析计算，获得了机体的基本振型和相关频率。应用模态试验验证了模型的精确程度，从而提出合理的改进方案。     

火花点燃式发动机压缩比与数字计数器读数的校正关系

采用压缩比与数字计数器的对应检索校正关系来评定检查火花点燃式发动机的机械状况。根据沿海不同地区室内室间实验室的对比与协调试验计算分析，所采用的检索法达到美国沃克夏机器制造厂规定的ASTM精度。本文提出的检索法具有快速、简捷和准确等特点，可适用于沿海地区火花点燃式发动机的机械设备状况校准试验。     

Measurement of the size, shape and orientation of convex bodies

Different types of solid bodies (particles) with specific shape and size are needed for industrial processes. For spherical particles, ‘sizer’ measurements are usually reported as sphere diameters. For non-spherical particles, particle shape and especially orientation must be taken into account. Particles of a specific shape will present different views when looked at from different directions.We have employed a Camsizer^® instrument to measure the distribution of projected area under different physical conditions for solid cylindrical particles:

•

Under ‘ideal’ conditions, corresponding to a uniform distribution of particle orientation, measurements agreed with predictions. The celebrated theorem of Cauchy applies only to this case.

•

For two other situations, measured and predicted results differed. However, from the experimental data it was possible to infer the particle orientations and hence theoretically predict the projected area distribution. Excellent agreement between theory and practice was then restored.

     

Drying-induced stresses in elastic and viscoelastic saturated materials

The paper presents a theoretical analysis of stresses generated during convective drying of kaolin, based on elastic and viscoelastic models. The equations of these models were solved analytically for a cylindrically shaped sample; the distribution and evolution of the radial and circumferential stresses are illustrated in diagrams. The acoustic emission method was used in experimental tests for identification on line of the time period during which the stresses reach their maximal values. A better correlation has been found between the experimental tests and the theoretical predictions obtained on the basis of the viscoelastic model.     

基于显著性分析的气缸盖结构优化设计

为了改变缸盖的结构,提高气缸盖运行工况下的温度分布及结构可靠性,进行了以鼻梁区宽度等六组参数为设计变量、以其许用范围约束条件、以等效热应力最低为优化目标的汽缸盖结构优化。基于正交实验法,构建了6因素5水平的正交实验表,并建立相应的三维模型,仿真得到了温度场及热应力。通过均值化法去量纲,分析得到了各因素的显著性水平,基于各因素的显著性水平选取了最优方案,并进行对比。结果表明,优化尺寸优选后方案的最大热应力比原始结构降低了13.48%,为缸盖的结构设计提供了一定的参考。