瓷砖釉面TiO2薄层对甲基橙的光催化降解

采用溶胶-凝胶法，在瓷砖釉面上制备了良好光催化活性TiO2薄层材料，研究结果表明瓷砖釉面TiO2薄层材料对甲基橙的光催化反应遵循一级动力学规律，光催化降解率与液层厚度符合指数关系。在太阳光照射下，釉面瓷砖TiO2薄层材料能对甲基橙有效地降解。     

Starch- polyvinyl alcohol crosslinked film— performance and biodegradation

Starch-PVOH cast films were prepared with and without crosslinking agent (hexamethoxymethylmelamine) in the absence of plasticizer. Moisture absorption in films without crosslinking agent at a low relative humidity was similar to that of PVOH and increased as the relative humidity increased. Films with crosslinking agent showed moisture absorption linearly proportional to the relative humidity. Significant improvement in resistance to water disintegration for crosslinked starch-PVOH films was observed. While the tensile strength decreased with increased relative humidity, crosslinking significantly improved the tensile strength. Increased PVOH content improved elongation of films even when the relative humidity was 80% or higher. Biodegradation studies revealed that the degradation rate was negatively correlated with the PVOH content in films and crosslinking generated more converged degradation curves. Names are necessary to report factually on available data; however, the USDA neither guarantees nor warrants the standard of the product, and the use of the name by USDA implies no approval of the product to the exclusion of others that may also be suitable.     

从废感光胶片中回收银

研究了以Fe3 -乙二胺四乙酸二钠-N a2S2O3体系为浸取剂从废感光胶片中回收银的方法,考察了浸出银的最佳工艺条件。实验表明,当浸取剂中FeC l3.6H2O质量浓度为35g/L、N a2S2O3.5H2O质量浓度为150g/L、pH为7、固液质量比为3∶10时,浸取剂可重复使用6次,胶片上银的浸出率可达99%以上;浸取液中的银采用硼氢化钠还原回收,粗银粉配以熔剂高温熔炼可得到纯度达99.78%的银,银回收率达96.88%,回收银后的浸取液可循环使用。     

Enzyme-Retted Flax Fiber and Recycled Polyethylene Composites

Municipal solid wastes generated each year contain potentially useful and recyclable materials for composites. Simultaneously, interest is high for the use of natural fibers, such as flax (Linum usitatissimum L.), in composites thus providing cost and environmental benefits. To investigate the utility of these materials, composites containing flax fibers with recycled high density polyethylene (HDPE) were created and compared with similar products made with wood pulp, glass, and carbon fibers. Flax was either enzyme- or dew-retted to observe composite property differences between diverse levels of enzyme formulations and retting techniques. Coupling agents would strengthen binding between fibers and HDPE but in this study fibers were not modified in anyway to observe mechanical property differences between natural fiber composites. Composites with flax fibers from various retting methods, i.e., dew- vs. enzyme-retting, behaved differently; dew-retted fiber composites resulted in both lower strength and percent elongation. The lowest level of enzyme-retting and the most economical process produces composites that do not appear to differ from the highest level of enzyme-retting. Flax fibers improved the modulus of elasticity over wood pulp and HDPE alone and were less dense than glass or carbon fiber composites. Likely, differences in surface properties of the various flax fibers, while poorly defined and requiring further research, caused various interactions with the resin that influenced composite properties.     

Mechanical and Barrier Properties of Biodegradable Films Made from Chitosan and Poly (Lactic Acid) Blends

Biodegradable film blends of chitosan with poly(lactic acid) (PLA) were prepared by solution mixing and film casting. The main goal of these blends is to improve the water vapor barrier of chitosan by blending it with a hydrophobic biodegradable polymer from renewable resources. Mechanical properties of obtained films were assessed by tensile test. Thermal properties, water barrier properties, and water sensitivity were studied by differential scanning calorimeter analysis, water vapor permeability measurements, and surface-angle contact tests, respectively. The incorporation of PLA to chitosan improved the water barrier properties and decreased the water sensitivity of chitosan film. However, the tensile strength and elastic modulus of chitosan decreased with the addition of PLA. Mechanical and thermal properties revealed that chitosan and PLA blends are incompatible, consistent with the results of Fourier transform infrared (FTIR) analysis that showed the absence of specific interaction between chitosan and PLA.     

聚合硅酸硫酸铝铁的制备与应用

在n(Fe A1)／n(Si)为0．5～1．0、n(Al)／n(Fe)为2．5～3．0、SiO2质量分数为2．3％、硅酸钠溶液的活化pH为5．5、硅酸钠溶液的活化时间为12min或SiO2的质量分数为2．0％、硅酸钠溶液的活化pH为6．0、硅酸钠溶液的活化时间为3min的条件下，制备出的聚合硅酸硫酸铝铁对废水的除浊效果最佳，除浊率大于98％。     

复合填料热传导过程数值模拟

复合填料由废铸砂、粉煤灰、聚苯乙烯(EPS)颗粒、水泥和水按一定质量比例混合制成,具有低导热性、抗冻胀和轻质特性。根据热阻力法则和比等效导热系数相等法则,将材料视为由大量正方形单元体组成,其中心为一个球形EPS颗粒,这种单元体与总体的导热系数相等。运用AN SY S软件对复合填料单元体的传热过程进行了有限元模拟,根据瞬态法导热系数测试原理,推求不同EPS掺入比情况下的复合填料导热系数,分析EPS颗粒与导热系数的关系,发现材料导热系数随着EPS掺入比的增加而快速降低。将材料导热系数数值模拟与实测结果作比较,发现有限元模拟值与实测值接近,说明采用有限元方法可以实现对材料传热过程的模拟。     

拉伸加载下老化复合固体推进剂的损伤演化定量分析

目的 定量分析老化对拉伸加载下复合固体推进剂细观损伤演化的影响规律。方法 开展不同老化时间（0、32、74、98 d）下三组元端羟基聚丁二烯（HTPB）复合固体推进剂的热加速老化试验,以及老化后推进剂的微型哑铃形试验件在不同拉伸应变水平（0、5%、10%、20%、40%、50%）下的微CT扫描观测试验,并对扫描重构图像进行定量分析,获得老化对推进剂细观损伤演化的影响规律。结果 随拉伸应变增加,老化前后推进剂微CT图像的灰度均方差、平均孔隙率和图像的分形维数均呈非线性增加趋势,图像的灰度均值呈非线性减小趋势。在较低应变水平（<10%）下,上述参数受老化时间的影响不显著,但随拉伸应变增加（≥10%）和老化时间增长,灰度均方差、平均孔隙率、孔隙率增量和分形维数的数值整体增高,而灰度均值随老化时间的增长而降低,且不同老化时间下,分形维数与平均孔隙率之间存在正线性关系。结论 重构得到微CT图像的灰度均值、平均孔隙率和分形维数可作为表征参数,用于定量分析老化复合固体推进剂在拉伸载荷下的细观损伤和损伤的动态演化规律,推进剂的初始损伤和小应变下的损伤程度受老化的影响较弱,而老化时间对推进剂细观损...     

基于二值逻辑的复合绝缘子状态判别策略研究

复合绝缘子是架空输电线路上广泛使用的设备,它的老化会给电力系统的正常运行带来威胁。电力相关工作人员需要一种能够对复合绝缘子的运行状态进行判别的方法,帮助他们确定复合绝缘子是否满足运行要求,而对复合绝缘子的定性表征就成为一种优选的表征策略。将运行后的复合绝缘子分成"满足运行要求"和"不满足运行要求",使用二值逻辑回归模型,选取合适的特征量,建立了复合绝缘子状态表征体系。     

TiO2薄膜光催化效果的强化

采用溶胶-凝胶法制备TiO2溶胶,将其涂覆在普通钠钙玻璃上,以TiO2对甲基橙的光分解率探讨TiO2薄膜最佳光催化性能.结果表明,当PEG400的加入量为7%时,TiO2薄膜的光催化性能最强;用锐钛型TiO2粉末二次引发的溶胶提拉制成的薄膜对甲基橙的光催化分解效果有很大的提高;经滴加操作后薄膜的光催化性能有明显改善;各个影响因素最好的组合效果为滴加操作 锐钛型粉体引发 H2SO4超强酸化 La3 掺杂.