Boussinesq-type modelling using an unstructured finite element technique

A model for solving the two-dimensional enhanced Boussinesq equations is presented. The model equations are discretised in space using an unstructured finite element technique. The standard Galerkin method with mixed interpolation is applied. The time discretisation is performed using an explicit three-step Taylor–Galerkin method. The model is extended to the surf and swash zone by inclusion of wave breaking and a moving boundary at the shoreline. Breaking is treated by an existing surface roller model, but a new procedure for the detection of the roller thickness is devised. The model is verified using four test cases and the results are compared with experimental data and results from an existing finite difference Boussinesq model.     

地质钻探技术与应用研究

钻探技术是取得地下实物资料、验证地下信息推断与解释、最终圈定矿体、计算储量、评估品位唯一的技术手段,是实现取得宏观影响大成果的重要技术支撑.我国钻探技术和装备水平与国外先进国家相比有很大的差距,但近些年来有了长足的发展.通过国家重大科学工程项目“中国大陆科学钻探工程”5158m“科钻一井”的实施,取得了一系列钻探技术成...     

白涧铁矿南区复杂地层钻探施工技术

邢台白涧铁矿南区地层岩石破碎、部分地层含角砾、胶结性差、漏失严重,钻探施工中存在掉块卡钻、缩径、坍塌、埋钻及孔内泥浆全部漏失等难题。通过优化钻孔结构、使用新工艺、新方法,合理选择钻进参数,采用绳索取心钻进配合预留技术套管,有效解决了上部煤系地层的坍塌问题;采用反丝套管的方法,极大地减轻了由于地层缩径、掉块引起的套管下不到位、起拔困难等风险;常规型绳索取心钻杆替代套管方法的采用,提高了含角砾、松散地层的穿过速度,减少了钻探工作量的报废,加快了施工进度;特别是高胎体双水口钻头的使用,提高了钻进效率,节约了钻探施工成本,项目得以如期完成。     

高研磨性地层复合式钻头的研制与应用

金山气田、龙凤山构造、长岭断陷等登娄库组以下深部地层可钻性差,研磨性强,导致钻头磨损严重,使用效率低。在对牙轮钻头、PDC钻头及孕镶金刚石钻头在高研磨性地层中的适应性进行细致和全面分析的基础上,提出了把PDC钻头机械钻速高和孕镶金刚石钻头进尺多的技术优势相结合的研制思路,开展PDC+孕镶复合式钻头设计。现场应用取得了良好的试验效果。提出了合理化的建议。     

适用于栅格状孕镶金刚石钻头的胎体配方研究

为了提高钻进坚硬岩层的工作效率,将孕镶金刚石钻头胎体结构设计为栅格状,分析了栅格状孕镶金刚石钻头钻进岩层时的碎岩方式,并采用粉末冶金法制备Inconel 718和CoCrMo试样,通过分析不同烧结温度对两种胎体试样的硬度、耐磨性及抗弯强度的影响,确定了两种材料的最优烧结参数,并对其在该烧结温度下的力学性能进行对比分析。研究结果表明：Inconel 718和CoCrMo均具有较好的抗弯强度,满足钻进坚硬岩层对胎体抗弯强度的要求。Inconel 718的硬度比传统WC基胎体材料小,试样磨损量较大,适合用于地质灾害应急勘查等要求钻进速度快的极端情况;CoCrMo的硬度及耐磨性与传统WC基胎体接近,适合作为孕镶金刚石钻头的胎体材料。     

哈萨克斯坦科扎萨伊油田优快钻井技术

哈萨克斯坦科扎萨伊油田钻井地质环境复杂,储层位于盐下,钻遇的地层层系多,地层性质差异大,具多套压力系统。钻井过程中发生地层漏失、坍塌、掉块及盐膏层蠕变等复杂情况,严重影响了钻井时效和钻井安全。针对这些技术难题,开展了油田井身结构、井身质量、提速潜力、高效钻头等分析与优化,提出了预弯曲钻具高倾角地层井斜控制技术、混合钻头减震提速技术,以及PDC-孕镶块复合钻头高研磨性地层提速技术。现场应用取得了较好的效果,平均机械钻速提高50%以上,钻井周期缩短28%。     

工程钻机圆锥滚子轴承的预紧装置

分析了工程钻机在施工过程中轴承游动间隙对钻机的影响,提出了钻机输出轴圆锥滚子轴承的外端,加装一套碟形弹簧预紧装置,有效地解决轴承的游动间隙。     

NP6-1井PDC钻头断落处理与认识

随着PDC钻头的广泛使用,因PDC钻头选型与钻遇地层的不匹配,或PDC钻头本身质量问题,也遇到一些井下复杂情况。此文介绍NP6-1井在311．2mm井段使用PDC钻头钻至井深2878．76m时,PDC钻头从公扣根部折断留在井底,加工公锥和采取适当措施成功地打捞出落鱼,避免侧钻,挽回了经济损失。该井成功打捞出PDC钻头,为同类型的井下落鱼或小落鱼提供参考与借鉴。     

Development of A Depth-Integrated Longshore Current Model with Unstructured Grids

A depth-integrated model for simulating wave-induced longshore current was developed with unstructured grids. Effects of surface roller and horizontal mixing under combined waves and currents were incorporated in the numerical model. Recommended values of model coefficients were also proposed based on sensitivity analysis. Field observations and three series of laboratory measurements including two cases conducted on the plane beach and one implemented on the ideal inlet were employed to examine the predictive capability of this model. For the field case and laboratory cases conducted on the plane beach, numerical results were compared favorably with the measured data. For the case with an ideal inlet, simulated circulation pattern is supposed to be reasonable although some deviations between numerical results and measured data still can be detected.     

国际油气井钻头进展概述（二）——FuseTek融合钻头与Pexus组合钻头

NOV公司2013年向市场推出FuseTek融合钻头。它将PDC钻头的高钻速与孕镶金刚石钻头的耐磨性结合于一体,适宜于钻进中硬—坚硬、高研磨性地层。FuseTek钻头已广泛应用于刚果、厄瓜多尔、中国、哥伦比亚等国家。应用表明,该新型组合钻头比PDC钻头或牙轮钻头钻进效率提高许多,工作寿命增加1～3倍或更多。Shear Bits公司于2014年推出Pexus组合钻头。该钻头广泛应用于加拿大冰川冰碛物钻进。地层上部硬卵砾石层利用可转动硬质合金齿钻进,下部软砂岩与页岩则运用PDC碎岩。整个冰碛物地层用一个Pexus钻头一钻到底。所述3类组合式钻头（含Kymera钻头）对于未来实现“一个钻头,一口井”的目标有重要意义。