水槽造流系统水力计算与泵机选择

提供一种完整的用于试验水槽造流系统的水力计算和泵机选择方法 ,可用于其他类似工程设计。     

About the specification of erosion flux for soft stratified cohesive sediments

The present paper deals with the specification of bed erosion flux that accounts for the effects of sediment-induced stratification in the water column. Owing to difficulties in measuring the bed shear stress _b and the erosive shear strength _s, we suggest a series of methods that combine laboratory and numerical experiments. A simplified turbulent transport model that includes these effects helps to quantify _b and _s. Focusing on soft stratified beds, the present study considers erosion rate formulas of the form =_f exp {[T_b-T_s]} where is a model constant (=1 for Gularte's (1978) formula and =1/2 for Parchure's (1984) formula). First, the bed erosive strength profile _s(Z) is adjusted by forcing the turbulent transport model with measured erosion rates. Second, three procedures are suggested to determine the erosion rate formula coefficients _f and : a global procedure and two different layer-by-layer procedures. Each procedure is applied to an erosion experiment conducted in a rotating annular flume by Villaret and Paulic (1986). The use of the layer-by-layer procedure based on a least squares fitting technique provides a closer fit than the global procedure. The present study points out the complementarity of experimental and numerical approaches and also suggests possible improvements in laboratory test procedures.     

随钻测录井地质导向二维分解实时绘图方法

根据随钻测录井实时地质导向和大斜度、水平井评价成图技术需求，针对传统绘图方法存在的弊端，提出了将测录井信息、井眼轨迹和地质模型进行二维分解的实时绘图方法。针对二维分解绘图方法绘图时空复杂度较高的问题，给出了不同事件驱动下的局部实时计算和拷屏重绘算法，控制了对CPU和内存的消耗、提高了绘图效率，消除了实时绘图的闪烁和卡顿现象。应用实例表明，二维分解实时绘图方法能够实现大尺度随钻测录井地质导向图形的流畅、无卡顿实时绘图，可提高大斜度、水平井储层模型评价的刻画精度和时效。     

Molar tooth structures of the Neoarchean Monteville Formation, Transvaal Supergroup, South Africa. I: Constraints on microcrystalline CaCO3 precipitation

Molar tooth (MT) structures are enigmatic, contorted millimetre‐ to decimetre‐long veins and spheroids of microcrystalline calcite that formed during very early diagenesis in Precambrian sediments. MT structures in the ca 2·6 Ga Monteville Formation are 600–800 Myr older than previously reported occurrences and establish that conditions necessary for MT genesis were met locally throughout much of the Precambrian. In the Monteville Formation, MT structures were formed shallow subtidally, extending to depths near storm wave base, in shale host sediments intercalated with storm‐generated carbonate sand lenses. They are filled with microcrystalline calcite and rare pyrite. Microcrystalline calcite identical to that in MT structures fills other pore space, including porosity between grains in carbonate sand lenses, moldic porosity in sand grains, sheet cracks in columnar stromatolites, and shallow cracks on sandy bedding planes. Relationships in the Monteville Formation demonstrate that microcrystalline CaCO₃ precipitated in fluid‐filled cracks and pores; microcrystalline calcite characteristics, as well as the paucity of carbonate mud in host rocks, are inconsistent with injection of lime mud as the origin of MT structures. Locally, MT cracks were filled by detrital sediment before or during precipitation. Precipitation occurred in stages, and MT CaCO₃ evolved from granular cores to a rigid mass of cores with overgrowths – allowing both plastic and brittle deformation of MT structures, as well as reworking of eroded MT structures as rigid clasts and lime mud. Crystal size distributions and morphology suggest that cores precipitated through nucleation, Ostwald ripening and size‐dependent crystal growth, whereas overgrowths formed during size‐independent crystal growth.     

低密度钻井液DMZ的开发与应用

钻井液是钻探施工的血液,低密度无固相钻井液ＤＭＺ,能有效解决小口径绳索取心钻探中出现的钻杆内结泥皮、岩粉携带能力差、失水量高等问题。     

纳米材料对顶管法施工触变泥浆减阻性能影响及浓度优选研究

顶管法施工具有设备少、工序简单、工期短、造价低等优点,被广泛应用于城市涵管、管廊等工程中。触变泥浆是顶管施工中重要的润滑减阻剂,其减阻性能的好坏对顶管施工特别是长距离、大断面顶管工程的顺利进行至关重要。论文使用膨润土触变泥浆为基础泥浆,质量配比为膨润土：羧甲基纤维素钠（CMC）：无水Na₂CO₃：水=80 ： 2 ： 3 ： 920,并选择纳米ZnO、纳米SiO₂、纳米Al₂O₃ 3种纳米材料作为添加剂,通过测试泥浆密度、pH、六速黏度、滤失、泥饼黏附系数和析水率等指标的变化,确定最优纳米材料类型并优选配比浓度。结果表明：浓度为2%纳米SiO₂触变泥浆的减阻性能最好,比基浆减阻性能提升约14%。本文研究成果可为提高长距离、大断面顶管施工中触变泥浆的减阻性能提供一定借鉴,对纳米材料在触变泥浆中的应用具有一定参考作用。     

生态地质研究进展与展望

生态地质学是研究生态系统与地质环境之间关系的一门交叉学科,对国土空间生态保护修复工作有重要理论支撑作用。我国生态地质研究工作虽然经过了多年的发展与积淀,但时至今日生态地质学仍然处于研究和探索阶段。鉴于此,基于前人的大量研究,总结了国内外生态地质研究进展: 国际上,俄罗斯建立了生态地质学研究体系,美国发起的地球关键带研究是与生态地质研究十分契合的主题; 在国内,生态地质研究主要着眼于”生态-地质”相互作用过程与机理以及地质环境影响下的系统性生态修复研究。在此基础上,提出了生态地质学涵义及其研究内容、方法技术创新及学科体系构建思路,以期为服务山水林田湖草沙整体保护、系统修复、综合治理和生态地质系统深化研究提供借鉴。     

台风作用下淤泥质海岸动力地貌响应

基于200509号麦莎台风(近似百年一遇)作用前后杭州湾北岸龙泉-南竹港实测的海岸地形和水文资料,利用分形技术、冲刷深度和闭合水深等相关概念分析淤泥质海岸的剖面变化、岸线进退以及地形冲淤,进而探讨海岸响应台风作用的动力地貌行为.结果表明:1)台风作用前后的海岸动力地貌过程表现为水下类似沙坝的堆积体削平、凹处填洼,水下平台发育锯齿或较小的坝--槽,海岸剖面的分维数降低,剖面坡度处于平缓;2)麦莎台风对海床的整体冲淤幅度不大,这可能是由于研究区大潮讯的增水致使波浪对海床的塑造能力减弱以及码头的遮蔽作用造成;3)台风作用对海岸的冲刷深度约为0.8 m,闭合水深为9.5 m,近岸-1 m邻近区成为海岸响应台风作用最敏感的地带;泥沙主要在0 m到闭合水深区间的海床发生纵、横向运移.     

Numerical flow and performance analysis of a water-jet axial flow pump

The purpose of the present study is to investigate the performance and three-dimensional flow fields in a water-jet pump. TASCflow is employed to simulate the rotator-stator coupling flow field. A standard k-ε turbulence model combined with standard wall functions is used. In order to investigate the effect of a rear stator on flow fields, the flows in two water-jet pumps with and without a rear stator are studied. Computational fluid dynamics (CFD)-predicted overall performances are in good agreement with the experimental results. Then the flow fields, such as the pressure distribution on the blade surfaces, and the axial and tangential velocity distribution, especially the radial loading distribution, are investigated at different flow rates. In addition, the effects of a rear stator and different spacings between the rotor and the stator on the overall performance and the flow fields of the water-jet pump are also investigated.     

Non-equilibrium flocculation characteristics of fine-grained sediments in grid-generated turbulent flow

Results are presented from a series of settling column experiments investigating temporal variations in the flocculation characteristics of purely cohesive (kaolin clay) sediment suspensions and cohesive (kaolin) and non-cohesive (fine sand) sediment fraction mixtures. Experimental runs were conducted under controlled hydrodynamic conditions generated by a rigid array of in-phase oscillating grids. The results indicated that rapid initial floc aggregation occurred under low turbulent shear rates, with peak maximal and root-mean-square (r.m.s.) floc sizes (∼ 400 μm and ∼ 200 μm, respectively) attained after relatively short time periods, before reducing with time. By contrast, lower aggregation rates and smaller floc sizes were observed under higher shear conditions, with flocs retaining suspended in the settling column for longer time scales due to the increased turbulence. The mud input concentration displayed some correlation with maximal and r.m.s. floc sizes at higher shear rates but no correlation was apparent at low shear rates. This observed floc behaviour may be attributed to the differences in concentration gradients at high and low shear rates that affect both floc settling rate and time required for flocs to attain equilibrium size. The addition of the fine sand fraction to the kaolin clay suspension reduced both the initial floc formation (i.e. aggregation) rate and the maximal and r.m.s. floc sizes attained throughout the experiments. The reduction in maximal floc sizes appeared to be enhanced by an increase in the ratio of fine sand to kaolin clay content within the mixture.