南黄海陆架沉积学研究

黄海中部、济州岛西南,存在厚层的泥质沉积,它们分别与上述地区的冷涡活动区相对应。在两个泥质沉积区之间又出现连接它们的通道,形成别有特征的“冷涡-通道”沉积体系。经分析发现,这个沉积体系,完全受控于黄海暖流、冷涡及其相关的环流体系。此外,在黄海西南部及东海北部海底发现大面积砂岩及其砾石,揭示了黄、东海陆架沉积物的新源地。     

东营城区高精度三维地震采集方法研究

根据东营城区内建筑物较多，环境干扰较大，地下构造复杂，断裂非常发育，目的层埋藏深，资料信噪比较低的特点，以地震老资料和钻井资料为基础，建立地震地质模型，利用射线追踪技术选取合适的观测系统参数。充分利用卫星数字地图，没计了灵活多变的观测系统，采用可控震源与炸药震源配合使用方法，及时对城区内地下面元的覆盖次数、方位角和炮检距的分布进行质量监控，利用现场处理系统对资料进行及时分析，提高了地震资料品质。所获得的东营城区高精度三维地震采集资料显示，其浅中层分辨率和中深层信噪比都有了明显改善，取得了良好的地质效果。     

南极布兰斯菲尔德海峡表层沉积物的酸解烃

本文研究了南极布兰斯菲尔德海峡表层沉积物的酸解烃分布特征，并佐以热释汞和蚀变碳酸盐的分析。从酸解烃中甲烷含量的低值和Ｃ１／（Ｃ２＋Ｃ３）比值，以及乙烯的存在等判断，布兰斯菲尔德海峡沉积物的烃类气体来自于生物成因。     

黄海海域陆相中生界地震反射特征及靶区优选

利用前人对黄海海域油气勘探成果，作者对北黄海盆地，南黄海盆地北部坳陷陆相中生界进行了研究。结果认为：黄海海域陆相中生界分布广、厚度大、具有良好的生、储、盖组合，是该区下步油气战略性调查的首选目标。并提出北黄海陆相中生界油气勘探应以东部凹陷为主，同时兼顾中部凹陷。南黄海北部坳陷近期油气勘探重点应选择北部凹陷和加大东北凹陷的研究力度。南黄海南部坳陷陆相中生界油气勘探重点放在南五和南七凹陷。     

A technique for conducting seismic refraction experiments on the ocean bed using bottom shots

A technique has been devised for firing arrays of bottom shots on the ocean bed in depths upto 4000 m or more. Ten kilogram explosive charges are dropped from the surface while the shooting ship is navigated acoustically. They are detonated at preset times by an electronic timer which initiates an electrical detonator, detonating cord and cast PETN/TNT explosive. Ranges to ocean bottom seismographs, and the shot instants, can be calculated from the arrival-time differences of the direct and surface-reflected water waves. The accuracy, which is dependent on water-depth and range, was better than 22 m in range and 14 msec in shot instant for our experiments.     

浅层SH反射波法和多道瞬态面波法 进行联合工程勘察的讨论

针对目前单一工程物探方法调查浅部地质结构的局限性,提出采用弹性波法勘察中研究浅部地质结构的SH波反射勘察和多道瞬态面波法勘察这2种有效手段进行联合勘探,提高其可靠性和精度,并给出了3个实例,指出了在数据采集和处理时应注意的问题。     

漾濞地震震源位置分析

采用一致的地震震相和台网布局，应用昆明数字地震台网资料，对2002年月1月4日－1月7日的漾濞地震及序列作进一步核定，得出了更精确的地震震源位置，并作出三维空间图。     

Development of site-specific design ground motions in Western and Eastern North America

This paper presents results recently obtained for generating site-specific ground motions needed for design of critical facilities. The general approach followed in developing these ground motions using either deterministic or probabilistic criteria is specification of motions for rock outcrop or very firm soil conditions followed by adjustments for site-specific conditions. Central issues in this process include development of appropriate attenuation relations and their uncertainties, differences in expected motions between Western and Eastern North America, and incorporation of site-specific adjustments that maintain the same hazard level as the control motions, while incorporating uncertainties in local dynamic material properties. For tectonically active regions, such as the Western United States (WUS), sufficient strong motion data exist to constrain empirical attenuation relations for M up to about 7 and for distances greater than about 10–15 km. Motions for larger magnitudes and closer distances are largely driven by extrapolations of empirical relations and uncertainties need to be substantially increased for these cases.

For the Eastern United States (CEUS), due to the paucity of strong motion data for cratonic regions worldwide, estimation of strong ground motions for engineering design is based entirely on calibrated models. The models are usually calibrated and validated in the WUS where sufficient strong motion data are available and then recalibrated for applications to the CEUS. Recalibration generally entails revising parameters based on available CEUS ground motion data as well as indirect inferences through intensity observations. Known differences in model parameters such as crustal structure between WUS and CEUS are generally accommodated as well. These procedures are examined and discussed.