Bond rolling resistance and its effect on yielding of bonded granulates by DEM analyses

A discrete element modelling of bonded granulates and investigation on the bond effect on their behaviour are very important to geomechanics. This paper presents a two‐dimensional (2‐D) discrete element theory for bonded granulates with bond rolling resistance and provides a numerical investigation into the effect of bond rolling resistance on the yielding of bonded granulates. The model consists of mechanical contact models and equations governing the motion of bonded particles. The key point of the theory is that the assumption in the original bond contact model previously proposed by the authors (55th CSCE‐ASCE Conference, Hamilton, Ont., Canada, 2002; 313–320; J. Eng. Mech. (ASCE) 2005; 131 (11):1209–1213) that bonded particles are in contact at discrete points, is here replaced by a more reliable assumption that bonded particles are in contact over a width. By making the idealization that the bond contact width is continuously distributed with the normal/tangential basic elements (BE) (each BE is composed of spring, dashpot, bond, slider or divider), we establish a bond rolling contact model together with bond normal/tangential contact models, and also relate the governing equations to local equilibrium. Only one physical parameter β needs to be introduced in the theory in comparison to the original bond discrete element model. The model has been implemented into a 2‐D distinct element method code, NS2D. Using the NS2D, a total of 86 1‐D, constant stress ratio, and biaxial compressions tests have been carried out on the bonded granular samples of different densities, bonding strengths and rolling resistances. The numerical results show that: (i) the new theory predicts a larger internal friction angle, a larger yielding stress, more brittle behaviour and larger final broken contact ratio than the original bond model; (ii) the yielding stress increases nonlinearly with the increasing value of β, and (iii) the first‐yield curve (initiation of bond breakage), which define a zone of none bond breakage and which shape and size are affected by the material density, is amplified by the bond rolling resistance in analogous to that predicted by the original bond model. Copyright © 2006 John Wiley & Sons, Ltd.     

土钉抗拔承载力的原位试验研究

根据土钉现场抗拔试验数据,分析了钉材、浆液龄期等因素对土钉抗拔承载力的影响,建议了合理的下层土钉开挖时间。最后通过试验土钉抗拔力反算土体与锚固体的极限粘结强度,并与规范推荐值进行了比较。     

粘性泥石流残留层的形成及减阻作用--以云南蒋家沟泥石流为例

通过对云南蒋家沟粘性泥石流的野外观测 ,讨论了粘性泥石流残留层的定义特征 ,在大量实测数据基础上 ,分析了残留层易形成时段的特性 ;分别对一次泥石流过程、若干阵泥石流和一阵泥石流残留层的变化进行了相关分析 ;最后用观测数据分析了泥石流残留层的减阻作用     

Inferring erosional resistance of bedrock units in the east Tennessee mountains from digital elevation data

Measures of local relief, regional relief, and slope were calculated from digital elevation models (DEMs) for 50 bedrock units in the Ridge and Valley and Blue Ridge provinces of Tennessee. Each of these measures was normalized and the three were then averaged to produce the erosional resistance index (ERI). Bedrock units with higher ERI values include coarse clastics, intermediate clastics, and metaplutonics. Units with lower values include shales, limestones, limestones plus dolostones, and carbonates plus fine clastics. Dolostones tend to have intermediate values. The calculated ERI values were compared with subjective ratings by a geologist with decades of field experience in east Tennessee. Generally, the agreement between the two ratings was good, the most glaring exception being several shales with improbably high ERI values. These turned out to be thin units cropping out beneath very hard sandstones, allowing them to stand higher and steeper than would otherwise be possible. A systematic method for detecting such erroneously high ERI values is suggested. Inspection of a drainage map superimposed on the geology map shows that in a given area, streams tend to flow on rock units with the lowest ERI values. In addition, statistical analysis shows that bedrock units with the lowest ERI values are, on average, almost three times closer to the nearest stream and six times as likely to have streams flowing on them than are units with highest values. Further, the effect of ERI on stream location is strongest for streams with drainage areas between 1 and 30 km². Thus, small streams appear to be subject to greater lithologic control than are larger streams.     

论如何审核确定抗震设防要求

为使县级以上地震部门做好审核建设工程抗震设防要求工作，介绍了确定抗震设防要求的4个依据、程序、重大重要建设工程的划分依据、活动断裂分类与分级规定等。指出，确定抗震设防要求既是一项法定的行政审批工作，又是一项严谨的科学技术工作。     

Comparative study of activation energies of conductance and desiccation rates of some marine algae

Measurements of the activation energy of electrical conductance and desiccation rates on subtidal marine algae from Florida were compared to similar data from the Bay of Fundy, Nova Scotia, on intertidal marine algae frequently subjected to long periods of exposure to air. We have developed a method for calculating the reaction rate constant of desiccation of fully hydrated marine algae. Values of activation energies and desiccation rate constants are consistent with the requirements for survival of these algae under widely different environmental conditions.     

预应力锚索在单桩竖向静载试验中的应用

在狭窄场地上进行大吨位单桩竖向静载试验时,需要解决的问题是在试验设备受场地限制无法增加的情况下如何提供足够大的反力荷载。根据此次试验场地地层中基岩埋藏丰富且深度较浅的情况,通过采用预应力锚索,进行加载反力装置设计,最终采用十字形加载反力装置,有效地解决了反力荷载不足的问题,从而为类似的试验提供了一种思路和选择。同时,通过对试验中出现的一些问题诸如锚固力、自由段变形等进行深入地分析和研究,提出了有关改进和完善反力装置现方案的建议。     

武汉市宝通寺地铁站基坑工程监测与分析

介绍了武汉市轨道交通二号线一期工程第20标段宝通寺地铁车站基坑工程的支护设计和监测方案,并对监测结果中基坑周围岩土体侧向水平位移和内支撑轴力进行了初步分析。监测结果表明：土层和岩层在基坑开挖过程中的侧向水平变形程度相差较大,且不同状态的土层侧向水平变形程度亦不相同;由于土层相对于岩层侧向变形较大,其支护时所表现出来的内支撑轴力亦比较大。因此,对于不同地层,进行基坑支护方案选择时应根据其不同变形性质进行合理的优化设计,对土层和岩层可采取不同的支护形式,以到达既安全又经济的目的。     

饱和弱化与液化土层的水平极限抗力

通过给饱和砂土层施加反压,模拟地震荷载作用下具有残余孔压的饱和弱化、液化土层。选择粉质细砂与细砂,进行了18组水平荷载作用下桩与饱和弱化、液化土层相互作用的模型试验,研究了饱和弱化、液化土层水平极限抗力随土层残余孔压增加的变化规律。结果表明,随土层中残余孔压增加,水平极限抗力逐渐降低,土层液化后的水平极限抗力大约降低80%~90%。通过定义饱和弱化、液化土层的强度,定量分析了饱和弱化、液化砂土的强度参数与水平极限抗力之间关系。又通过引入土层的残余孔压比折减系数,建立了确定饱和弱化、液化土层等效强度的关系式,进而提出了一种按等效强度确定饱和弱化、液化土层水平极限抗力的方法。     

祁连山北部基岩河道宽度对构造和岩性的响应

活动造山带基岩河流地貌研究,目前已成为构造地貌学研究的前沿和热点。河道宽度形态的调整变化是基岩河流响应构造、岩性和气候等扰动的重要方式之一。通过研究祁连山北部地区6个重点流域基岩河道的宽度形态发现：河道宽度总体上呈现出东西向和南北向的变化特征,河道向下游增宽的速率,东段地区显著高于中段地区,低山带显著高于高山带;对比河道宽度的变化特征与构造抬升速率及岩性抗蚀性的变化,可以推断：在祁连山北部地区,基岩河道宽度响应构造抬升和岩性抗蚀性的变化进行了系统地调整,构造抬升控制了流域河道宽度变化的总体趋势,而岩性抗蚀性变化则导致了流域内部局部河段河道宽度的大幅波动。在祁连山北部地区开展的基岩河道宽度形态研究,为利用基岩河道形态研究造山带的构造变形奠定了基础,对于探索构造抬升背景下地貌的发育过程具有十分重要的意义。