Application of micropolar plasticity to post failure analysis in geomechanics

A micropolar elastoplastic model for soils is formulated and a series of finite element analyses are employed to demonstrate the use of a micropolar continuum in overcoming the numerical difficulties encountered in application of finite element method in standard Cauchy–Boltzmann continuum. Three examples of failure analysis involving a deep excavation, shallow foundation, and a retaining wall are presented. In all these cases, it is observed that the length scale introduced in the polar continuum regularizes the incremental boundary value problem and allows the numerical simulation to be continued until a clear collapse mechanism is achieved. The issue of grain size effect is also discussed. Copyright © 2004 John Wiley & Sons, Ltd.     

Relationship between the seismicity and geologic structure of the Blanco Transform Fault Zone

Morphologic studies of an oceanic transform, the Blanco Transform Fault Zone (BTFZ), have shown it to consist of a series of extensional basins that offset the major strike-slip faults. The largest of the extensional basins, the Cascadia Depression, effectively divides the transform into a northwest segment, composed of several relatively short strike-slip faults, and a southeast segment dominated by fewer, longer faults. The regional seismicity distribution (m _b 4.0) and frequency-magnitude relationships (b-values) of the BTFZ show that the largest magnitude events are located on the southeast segment. Furthermore, estimates of the cumulative seismic moment release and seismic moment release rate along the southeast segment are significantly greater than that of the northwest segment. These observations suggest that slip along the southeast segment is accommodated by a greater number of large magnitude earthquakes. Comparison of the seismic moment rate, derived from empirical estimates, with the seismic moment rate determined from plate motion constraints suggests a difference in the seismic coupling strength between the segments. This difference in coupling may partially explain the disparity in earthquake size distribution. However, the results appear to confirm the relation between earthquake size and fault length, observed along continental strike-slip faults, for this oceanic transform.     

Bowen数和东中国海Bowen数分布

本文讨论Bowen数的意义、功能和计算法。同时,依据多年水文气象实测资料作统计,计算出东中国海的Bo值。其结果绘制成1月至12月的月平均分布图,从而对本海域的Bo分布特点作详细分析介绍。     

LAS格式解析及其扩展域的应用

激光雷达是近年来兴起的一种快速获取地物目标三维信息的主动遥感技术。其采集的离散激光点具有数据量大,信息丰富等特点。目前常用的LIDAR数据存储格式,在存储LIDAR数据时存在种种不足,且数据交换和共享困难。LAS格式是ASPRS制定的标准LIDAR数据交换格式,能较好地解决多属性离散激光点数据的存储问题,具有结构严谨,便于扩展等优点。本文在对LAS格式进行解析的基础上,针对LAS变长记录的扩展域,介绍了一些实际的应用。     

Short-term beach–dune sand budgets on the north sea coast of France: Sand supply from shoreface to dunes, and the role of wind and fetch

Three experimental plots, covering the transition from the upper beach to the dune, on the North Sea coast of France were monitored at various intervals over a period of 18–24 months via high resolution terrain surveys in order to determine inter-site sand budget variability, as well as patterns and processes involved in sand exchanges between the upper beach and dune. The wind regime consists of a fairly balanced mix of moderate (80% of winds are below 8 m/s) onshore, offshore and shore-parallel winds. Sustained dune accretion over several years depends on the periodic local onshore welding of shoreface tidal banks that have developed in the storm- and tide-dominated setting of the southern North Sea. The only site where this has occurred in the recent past is Calais, where bank welding has created a wide accreting upper beach sand flat. At this site, significant sand supply from the subtidal sand bank reservoir to the upper beach flat occurred only once over the 18-month survey following a major storm. The bulk of the sand deposited over this large flat is not directly integrated into the adjacent embryo dunes by onshore winds but is progressively reworked in situ into developing dunes or transported alongshore by the balanced wind regime, thus resulting in alongshore stretching of the embryo dune system. The Leffrinckoucke site near Belgium shows moderate beach–dune mobility and accretion, while the Wissant site exhibits significant upper beach bedform mobility controlled by strong longshore currents that result in large beach budget fluctuations with little net budget change, to the detriment of the adjacent dunes. Accretion at these two sites, which are representative of the rest of the North Sea coast of France, is presently constrained by the absence of a shore-attached sand bank supply reservoir, while upper beach–dune sand exchanges are further limited by the narrow wave-affected upper beach, the intertidal morphology of bars and troughs which segments the aeolian fetch, and the moderate wind energy conditions. The balanced wind regime limits net sand mobilisation in favour of either the beach or the dune, and may explain the relatively narrow longshore morphology of the dune ridges bounding this coast.     

Optimization of SAGD Well Elevation

The application of steam-assisted gravity drainage (SAGD) to recover heavy oil sands is becoming increasingly important in the northern Alberta McMurray Formation because of the vast resources/reserves accessible with this mechanism. Selecting the stratigraphic elevations of SAGD well pairs is a vital decision for reservoir evaluation and planning. The inherent uncertainty in the distribution of geological variables significantly influences this decision. Geostatistical simulation is used to capture geological uncertainty, which is used can be transformed into a distribution of the best possible well pair elevations. A simple exhaustive calculation scheme is used to determine the optimum stratigraphic location of a SAGD well pair where the recovery R is maximized. There are three basic steps to the methodology: (1) model the uncertainty in the top continuous bitumen (TCB) and bottom continuous bitumen (BCB) surfaces, (2) calculate the recovery at all possible elevation increments within the TCB and BCB interval, and (3) identify the elevation that maximizes R. This is repeated for multiple TCB/BCB pairs of surfaces to assess uncertainty. The methodology is described and implemented on a subset of data from the Athabasca Oilsands in Fort McMurray, Alberta.     

Cretaceous length of day perturbation by mantle avalanche

These last 10 years, numerical models of mantle convection have emphasized the role of the 670 km endothermic phase change in generating avalanches that trigger catastrophic mass transfers between upper and lower mantle. On the other hand, scientists have emphasized the concomitance of large-scale worldwide geophysical and tectonic events, which could find their deep thermal roots in the huge mass transfers induced by the avalanches. In particular, the paleontological records show two periods of length of day (l.o.d.) shortening between 420 and 360, and 200 and 80 Myr BP. This last event is synchronous with a strong true polar wander and a global warming of the upper mantle. In order to study the potential effects of the avalanche on the main component of the Earth’s rotation, the Liouville equation has been solved and the l.o.d. evolution has been calculated from the perturbations of the inertia tensor. The results show that the inertia tensor of the Earth’s is mainly sensitive to the global transfers through the 670 km discontinuity. The l.o.d. perturbations will be synchronous with the global thermal effects of the avalanche. These theoretical results allow proposing a self-consistent physical mechanism to explain periods of the Earth’s rotation acceleration. Within this context, the l.o.d. shortening during the Cenozoic and Cretaceous brings one more clue to the possible participation of a mantle avalanche in generating the concomitant large scale events which have occurred during this very particular period of the Earth’s history.