Effect of spatial variation characteristics on contouring of design storm depth

The ordinary kriging method, a geostatistical interpolation technique, was applied for developing contour maps of design storm depth in northern Taiwan using intensity–duration–frequency (IDF) data. Results of variogram modelling on design storm depths indicate that the design storms can be categorized into two distinct storm types: (i) storms of short duration and high spatial variation and (ii) storms of long duration and less spatial variation. For storms of the first category, the influence range of rainfall depth decreases when the recurrence interval increases, owing to the increasing degree of their spatial independence. However, for storms of the second category, the influence range of rainfall depth does not change significantly and has an average of approximately 72 km. For very extreme events, such as events of short duration and long recurrence interval, we do not recommend usage of the established design storm contours, because most of the interstation distances exceed the influence ranges. Our study concludes that the influence range of the design storm depth is dependent on the design duration and recurrence interval and is a key factor in developing design storm contours. Copyright © 2003 John Wiley & Sons, Ltd.     

东营城区高精度三维地震采集方法研究

根据东营城区内建筑物较多，环境干扰较大，地下构造复杂，断裂非常发育，目的层埋藏深，资料信噪比较低的特点，以地震老资料和钻井资料为基础，建立地震地质模型，利用射线追踪技术选取合适的观测系统参数。充分利用卫星数字地图，没计了灵活多变的观测系统，采用可控震源与炸药震源配合使用方法，及时对城区内地下面元的覆盖次数、方位角和炮检距的分布进行质量监控，利用现场处理系统对资料进行及时分析，提高了地震资料品质。所获得的东营城区高精度三维地震采集资料显示，其浅中层分辨率和中深层信噪比都有了明显改善，取得了良好的地质效果。     

Structural modeling and testing of a concrete canoe

A finite element model is set up and experimental tests are performed to help understand the behavior of a concrete canoe and subsequently optimize its design. First, the performance criteria that must be satisfied to participate at the annual ASCE/Master Builders competition are described. Then, the finite element model and the different loading cases that were studied are presented. Results from these loading cases are discussed and used to optimize the material properties as well as the thickness of the hull and the dimensions of the gunwale and reinforcing ribs. Static and dynamic experimental tests were also conducted to validate the results of the finite element analyses. The results indicate that the main stresses and strains are caused by the static load cases. The additional stresses caused during races are small.     

A Functional Analysis of the Benthic Macrofauna of the São Sebastião Channel (Southeastern Brazil)

Abstract.  The major problem in coastal areas of developing countries is disturbance caused by anthropogenic influence. This disturbance can be quantified by analysing the distribution and composition of marine communities using uni- and multivariate techniques and the biotic index. A study of benthic macrofauna was carried out along the São Sebastião Channel, northern coast of São Paulo State, Brazil, in an area with a submarine outfall, a petroleum terminal and a commercial harbour. Sampling was undertaken seasonally, by means of a van Veen grab (0.1 m²) at 15 oceanographic stations, from November 1993 to August 1994. A total of 392 species were identified (129 Polychaeta, 127 Mollusca, 98 Crustacea, 28 Echinodermata and 10 other phyla). The sedimentary pattern recorded for the São Sebastião Channel is very heterogeneous, influenced mainly by strong wind-driven currents, and differs from nearby shelf areas. The study area could be divided into three regions based on sediment texture and fauna: one region dominated by medium and coarse sand with low values of organic carbon; a second area where pelitic fractions were dominant with high values of organic carbon and nitrogen; and a third region characterised by fine and very fine sand, presenting intermediate organic carbon values. No temporal significant variation in abundance and species composition was found, except in autumn. The use of the 'marine Biotic Coefficient' showed the same ecological trend as the faunal abundance and demonstrated that the central continental region of the channel is affected by human activities.     

浅谈建筑设计企业的数据中心建设

信息系统数据和计算能力逐步集中的发展趋势以及信息系统逐步成为企业核心业务的支撑,使得企业数据中心的作用越来越重要。如何搞好数据中心建设,保障数据系统的安全、稳定运行,成为信息主管首先要考虑的问题。首先讨论数据中心的作用和数据中心与信息系统之间的关系,然后介绍一个目前在国际上处于领先水平、防护等级最高的数据中心的实例,最后论述数据中心的实施对策。     

钢筋混凝土圆环内支撑在软土深基坑支护中的设计与应用

通过对星河世纪城B2地块工程基坑成功支护设计实例介绍,全面阐述了钢筋混凝土圆环内支撑体系独特的布置形式、内力计算模式、方法和结果,以及在施工过程中的质量保证,为软土地基中类似基坑工程提供借鉴。     

杠杆点评估及设计空间抗差

本分析了杠杆点的几何含义和统计特征,从杠杆点的保差性,矩阵的摄动和参数估值可靠性的观点出发讨论了杠杆点的不利和有利的两个方面,提出了一个全面的设计空间抗差方案。     

R＆D投入的区位模式与区域经济发展

基于对中国R＆D投入的区位模式的实证检验，从投入一产出绩效的角度认为集中投入的区位模式具有较强的适宜性。利用聚类分析技术，按照R＆D的投入强度和及其对经济的带动效应、科技化效应、产业化效应将中国各省区划分为6类地区，具有代表性的是科技化模式和产业化模式。其中前者适合于技术存置较高的少数地区，而后者具有较强的借鉴意义。     

图像数据挖掘软件原型系统的设计与开发

提出了图像数据挖掘软件原型系统的设计与开发的试验框架,阐述了其设计与开发方法,介绍了各个模块的功能、设计与开发情况。