基于分块分形编码的多姿态、表情人脸图像检索

利用图像分形编码中定义域块和最小均方误差一一对应的特点，提出了1种基于分形编码的多姿态、表情的人脸图像检索方法。该方法将待检索图像分割为相同大小的值域块，然后将每一值域块按给定的定义域块进行分形编码，得到最小均方误差，计算该最小均方误差与图像库中最小均方误差的欧氏距离。将待检索图像所有值域块的欧氏距离求平均，此平均欧氏距离较小的几幅图像即为检索出的图像。实验证明该方法能够准确地检索出图像库中存储的同一人的不同姿态、表情的图像。     

比较原理在多有理数时滞区间系数离散系统的应用

应用多组有理数时滞离散系统的比较原理和频域法,将多组有理数时滞区间系数离散系统化为多组有理数时滞定常离散系统,以判定其时滞无关稳定性,并举例说明了新定理的有效性和实用性。     

Preservation/exhumation of ultrahigh-pressure subduction complexes

Ultrahigh-pressure (UHP) metamorphic terranes reflect subduction of continental crust to depths of 90–140 km in Phanerozoic contractional orogens. Rocks are intensely overprinted by lower pressure mineral assemblages; traces of relict UHP phases are preserved only under kinetically inhibiting circumstances. Most UHP complexes present in the upper crust are thin, imbricate sheets consisting chiefly of felsic units ± serpentinites; dense mafic and peridotitic rocks make up less than  10% of each exhumed subduction complex. Roundtrip prograde–retrograde P–T paths are completed in 10–20 Myr, and rates of ascent to mid-crustal levels approximate descent velocities. Late-stage domical uplifts typify many UHP complexes.

Sialic crust may be deeply subducted, reflecting profound underflow of an oceanic plate prior to collisional suturing. Exhumation involves decompression through the P–T stability fields of lower pressure metamorphic facies. Scattered UHP relics are retained in strong, refractory, watertight host minerals (e.g., zircon, pyroxene, garnet) typified by low rates of intracrystalline diffusion. Isolation of such inclusions from the recrystallizing rock matrix impedes back reaction. Thin-aspect ratio, ductile-deformed nappes are formed in the subduction zone; heat is conducted away from UHP complexes as they rise along the subduction channel. The low aggregate density of continental crust is much less than that of the mantle it displaces during underflow; its rapid ascent to mid-crustal levels is driven by buoyancy. Return to shallow levels does not require removal of the overlying mantle wedge. Late-stage underplating, structural contraction, tectonic aneurysms and/or plate shallowing convey mid-crustal UHP décollements surfaceward in domical uplifts where they are exposed by erosion. Unless these situations are mutually satisfied, UHP complexes are completely transformed to low-pressure assemblages, obliterating all evidence of profound subduction.     

阿尔金地区构造应力场及其对金属矿产分布的控制作用

构造应力场研究可以为区域矿产预测提供依据。主要根据节理、擦痕的测试分析，结合区域构造解析，确定阿尔金山东西向拉配泉－－红柳沟构造带经历了三期不同方向的应力作用：印支期以前的南北向挤压作用，印支－燕山期的北西－南东向的挤压和中生代晚期－新生代北东东－南南西向的挤压；并利用有限元数值模拟前两期构造应力场的演变过程，进而讨论了区域构造应力场对内生金属矿产分布规律的控制作用指出了区域寻找大型内生金属矿产的有利地段。     

Fracturation d'âge Aptien supérieur sur la bordure orientale de la plate-forme arabique (Haushi-Huqf,Oman)Aptian faulting (Shu'aiba Formation) on the eastern edge of the Arabian Platform (Haushi-Huqf,Oman)

In the Haushi-Huqf (Eastern Central Oman) as in other parts of the Arabian platform, a major sedimentary break is recorded between the Early Aptian carbonates (Shu'aiba Formation) and the Albian orbitolinid-rich marls (Nahr Umr Formation). The unconformity corresponds to a succession of events: (1) a brusque interruption of the regressive sequence of the Shu'aiba limestone (algae and small rudistid build-ups); (2) a stratigraphic gap related to the Late Aptian; (3) the development of a thick ferruginous crust (hardground) that covered the top surface of the Shu'aiba; the hardground is related to a forced flooding surface; (4) the Shu'aiba was rapidly drowned and buried under the Nahr Umr marls. Moreover, the Shu'aiba limestone was subject to faulting NW–SE-trending normal faults before lithification and formation of the ferruginous crust. The faulting episode is clearly dated: post-Early Aptian and pre-Albian. The signification of the faulting remains hypothetical. The syndiagenetic NW–SE normal faults may correspond to ‘en echelon’ faults, combined with transcurrent fault movements (for example the Haushi-Nafun Fault). The possible causes of these intra-platform transcurrent movements are discussed. To cite this article: C. Montenat, P. Barrier, C. R. Geoscience 334 (2002) 781–787.     

变形体的稳定性及其定量分析方法初探

变形体的稳定性是变形体性质的重要内容，它是工程实际中极为关注的问题，但从变形监测的角度上来分析变形的稳定性目前在国内外还未见任何实质性的报导。本文讨论了从变形监测角度上分析变形体稳定性的一般方法，进行变形稳定性的分类，初步研究了变形体稳定性的定量分析方法，定义了一系列量化指标，如稳定度、因素的影响域与因素的稳定域等。这些有利于把稳定性分析推向应用和深入，从而提高变形监测在变形体定性分析中的地位，增     

Preliminary results on kinematic model of tectonic blocks derived from high precision GPS observations in Southwest China

ＰｒｅｌｉｍｉｎａｒｙｒｅｓｕｌｔｓｏｎｋｉｎｅｍａｔｉｃｍｏｄｅｌｏｆｔｅｃｔｏｎｉｃｂｌｏｃｋｓｄｅｒｉｖｅｄｆｒｏｍｈｉｇｈｐｒｅｃｉｓｉｏｎＧＰＳｏｂｓｅｒｖａｔｉｏｎｓｉｎＳｏｕｔｈｗｅｓｔＣｈｉｎａＬＩＲＥＮＨＵＡＮＧ１）（黄立人）...     

我国黄铁矿矿床类型、分布规律及前景评估

中国黄铁矿资源丰富，按元素和矿物组合的不同，其矿床类型可分为：黄铁矿矿床；黄铁矿型铜矿床；含锌、铜黄铁矿型矿床；黄铁矿型多金属矿床；含钨黄铁矿型铜矿床；含锡黄铁矿型矿床；含金黄铁矿型矿床。最主要的成因类型是海底喷气沉积矿床，它广泛分布于不同时期的造山带及早前寒武纪克拉通。黄铁矿形成的构造环境可分为５种，即：边缘浅海或优地槽环境；上叠的断裂坳陷带；洋中脊；岛弧地带；陆相火山盆地。     

江南隆起东端伸展构造的识别及其意义

通过对屯溪流塘盆地典型伸展堆叠构造几何学和运动学的解剖，以及对其它几个伸展构造实例的分析，指出伸展构造在江南隆起的存在，它们的形成主要是重力作用的产物，遍及中、新生代。这种特征构造的解剖有助于深化认识江南隆起的构造特点和演化历史。