流动注射在线液—液萃取原子吸收光谱法测定天然水中铬（Ⅲ）和铬（Ⅵ）

利用新设计的流动注射液－液萃取分相器，研究了液－液在线萃取原子吸收光谱法测定Ｃｒ和Ｃｒ的实验条件、流路参数和操作程序。拟定的新方法用于武汉东湖不同区域水样中铬的测定，检出限为２．２ｎｇ／ｍｌ。     

Second-Order Solutions for Random lnterfacial Waves Under Steady Uniform Currents

In the present research, the study of Song (2004) for random interracial waves in two-layer fluid is extended to the case of fluids moving at different steady uniform speeds. The equations describing the random displacements of the density interface and the associated velocity potentials in two-layer fluid are solved to the second order, and the wave-wave interactions of the wave components and the interactions between the waves and currents are described. As expected, the extended solutions include those obtained by Song (2004) as one special case where the steady uniform currents of the two fluids are taken as zero, and the solutions reduce to those derived by Sharma and Dean (1979) for random surface waves if the density of the upper fluid and the current of the lower fluid are both taken as zero.     

江西省永平铜矿西部排土场极限堆载高度确定

国内外对排土场极限堆载高度的理论计算缺乏研究,目前尚无成熟的统一理论计算方法。文章结合永平铜矿西部排土场的工程实例,在进行边坡工程地质条件勘察与排土场岩土物理力学性质试验研究的基础上,采用数值计算方法对排土场进行了分层堆载数值模拟计算。通过对计算结果的分析,得到位移、塑性区与安全系数随堆载高度的变化规律,并确定了该排土场的极限堆载高度。     

论桩基施工中流砂现象处理

地下水流动对土体产生渗透力；当渗透力大于土体的抗剪强度，土体破坏，也就是当施工造成地下水水力坡度超过砂层的临界水力坡度即产生流砂现象．运用水文地质工程地质学方面的原理其处理方法有两类：—是莫尔一库仑法：即c法和φ法；二是临界水力坡度法(Ic法)．     

塑性混凝土截水连续墙“快速施工工法”的构想与实施

塑性混凝土截水连续墙“快速施工工法”的构想，是基于北京市海淀锡华保龄球综合运动馆基坑防渗工程提出的一种经济、简便、快捷的施工方法，从挖槽、搅拌、成墙一次连续完成，取得了截流防渗和有利基坑边坡稳定的良好效果。     

基岩水的壁间运动及基本特征

本文通过对基岩水与孔隙水的比较分析，介绍了基岩水的分布、水动力学和水化学特征，指出了基岩水运动具有均位趋势、选择流动及汇流特性，得出了渗流理论不宜用于基岩水的结论。     

郑州北郊水源地地下水流三维有限元模拟

本文从傍河水源地地下水流动的三维特征分析入手，结合三维有限元数值模型，模拟了两组大型抽水试验，识别和反求含水层参数，进一步对地下水开采方案进行了评价。     

区域采样法测定水中硫酸根离子的研究

在分散度不同的区域内进行区域采样用于水中硫酸根离子的测定，结果令人满意。应用此方法测定硫酸根离子的线性范围为２００．０～３０００ｍｇ／Ｌ；进样频率为１２０次／ｈ；相对标准偏差为１．７０％     

Late Paleozoic Fluid Systems and Their Ore-forming Effects in the Yuebei Basin, Northern Guangdong, China

Based on detailed and systematic researches of the geology of ore deposits, fluid inclusions and isotope geochemistry etc., and regarding the Late Paleozoic fluid system of the Yuebei Basin as an integrated object in this paper, we have revealed the temporo-spatial evolution law of the basin＇s fluid system and discussed its ore-forming effects by simulating and analyzing the distribution of ore-forming elements, the fluid thermodynamics and dynamics of evolution processes of this basin. The results show that Late Paleozoic ore-forming fluid systems of the Yuebei Basin include four basic types as follows. （1） The sea floor volcanic-exhalation system developed during the rapid basin slip-extension stage in the Mid-Late Devonian, which affected the Dabaoshan region. It thus formed the Dabaoshan-type Cu-Pb-Zn-Fe sea floor volcanic-exhalation sedimentary deposits. （2） The compaction fluid system developed during the stable spreading and thermal subsidence-compression stage of the basin in the Mid-Late Devonian. The range of its effects extended all over the whole basin. It resulted in filling-metasomatic deposits, such as the Hongyan-type pyrite deposits and pyrite sheet within the Fankou-type Cu-Pb-Zn-S deposits. （3） The hot water circulation system of sea floor developed during the stage of basin uplifting and micro-aulacogen from the late Late Carboniferous to Middle Carboniferous. The range of its effects covered the Fankou region. It thus formed MVT deposits, such as the main orebody of the Fankou-type Pb-Zn-S deposits. （4） The gravity fluid system developed during the stage of fold uplifting and the basin closed from Middle Triassic to Jurassic, forming groundwater hydrothermal deposits, e.g. the veinlet Pb-Zn-calcite orebodies of the Fankou-type Pb-Zn- S deposits. Migration and concentration of the ore-forming fluids were constrained by the state of temporo-spatial distribution of its fluid potential. Growth faults not only converged the fluids and drove them to move upwards, but also the fluids often crossed the faults to the edges of the basin at the bottom of these faults and the lithologic interfaces, and even migrated to the basin＇s edges from top to bottom along the faults, which may be one of the basic reasons for the stratabound deposits to cluster mainly along the contemporaneous faults on the inner border of the basin. The superposed mineralization resulting from the multi-stage activity of contemporaneous faults and ore-forming fluid systems in the basin may be one of the key factors for forming superlarge ore deposits.