Plane of elastic non-resisting tension material under foundation structures

In the frame of 2D-static problems one approaches the problem of elastic-NRT (not-resisting tension) semi-plane loaded on its limit line. This problem is intended to model the stress situation induced in the soil by a foundation structure. The solution, in terms of activated stress field, is searched for in the class of stress fields satisfying equilibrium and admissibility conditions, by applying an energy approach. Copyright © 2004 John Wiley & Sons, Ltd.     

Freely floating-body simulation by a 2D fully nonlinear numerical wave tank

Nonlinear interactions between large waves and freely floating bodies are investigated by a 2D fully nonlinear numerical wave tank (NWT). The fully nonlinear 2D NWT is developed based on the potential theory, MEL/material-node time-marching approach, and boundary element method (BEM). A robust and stable 4th-order Runge–Kutta fully updated time-integration scheme is used with regriding (every time step) and smoothing (every five steps). A special φ_n-η type numerical beach on the free surface is developed to minimize wave reflection from end-wall and wave maker. The acceleration-potential formulation and direct mode-decomposition method are used for calculating the time derivative of velocity potential. The indirect mode-decomposition method is also independently developed for cross-checking. The present fully nonlinear simulations for a 2D freely floating barge are compared with the corresponding linear results, Nojiri and Murayama’s (Trans. West-Jpn. Soc. Nav. Archit. 51 (1975)) experimental results, and Tanizawa and Minami’s (Abstract for the 6th Symposium on Nonlinear and Free-surface Flow, 1998) fully nonlinear simulation results. It is shown that the fully nonlinear results converge to the corresponding linear results as incident wave heights decrease. A noticeable discrepancy between linear and fully nonlinear simulations is observed near the resonance area, where the second and third harmonic sway forces are even bigger than the first harmonic component causing highly nonlinear features in sway time series. The surprisingly large second harmonic heave forces in short waves are also successfully reproduced. The fully updated time-marching scheme is found to be much more robust than the frozen-coefficient method in fully nonlinear simulations with floating bodies. To compare the role of free-surface and body-surface nonlinearities, the body-nonlinear-only case with linearized free-surface condition was separately developed and simulated.     

A new approach for the solution of the two-dimensional guillotine-cutting problem in ship production

A new approach has been developed for the arrangement of rectangular pieces in plates for the guillotine-cutting problem as encountered in ship production and similar manufacturing processes. The algorithm is quite novel in the sense that instead of making preliminary specifications and ignoring all the alternative arrangements, as is the case for most of the current models, it selectively considers feasible arrangements by eliminating the majority of the probable arrangements that render the problem insolvable. Intermediate steps of the algorithm produce results which cannot be obtained through integer programming. Losses are distributed to the minimum number of plates. The number of arrangement plans is also minimized. Overall the solution of the problem has been drastically simplified to allow even hand calculations instead of long computer runs.     

杠杆点评估及设计空间抗差

本分析了杠杆点的几何含义和统计特征,从杠杆点的保差性,矩阵的摄动和参数估值可靠性的观点出发讨论了杠杆点的不利和有利的两个方面,提出了一个全面的设计空间抗差方案。     

Holocene record of productivity in the NW Iberian continental shelf

A multiproxy approach (textural characteristics, heavy metal concentrations and benthic foraminifera data) was adopted to study the OMEX core KSGX 40, collected at the Galicia Mud Deposit (NW Iberian outer continental shelf) and recording the last ca. 4.8 ka cal BP. Geochemical profiles of Fe, Mn, Zn, Co, Cr, Cu, Ni, Pb, Al and Ca show significant temporal variations. Benthic foraminifera productivity proxy suggests that the recorded muddy events were contemporaneous of a higher C_org flux to the marine benthic environment. The higher flux of organic matter, following a long-term intensification of the upwelling and coinciding with a finer sedimentation, led to depressed levels of oxygen beneath the water-sediments interface and to early diagenetic processes of several redox-sensitive elements.     

A multi-method approach to study the stability of natural slopes and landslide susceptibility mapping

In this paper, a multi-method approach for the assessment of the stability of natural slopes and landslide hazard mapping applied to the Dakar coastal region is presented. This approach is based on the effective combination of geotechnical field and laboratory works, of GIS, and of mechanical (deterministic and numerical) stability analysis. By using this approach, valuable results were gained regarding instability factors, landslide kinematics, simulation of slope failure and coastal erosion. This led to a thorough assessment and strong reduction in the subjectivity of the slope stability and hazard assessment and to the development of an objective landslide danger map of the SW coast of Dakar. Analysis of the results shows that the slides were influenced by the geotechnical properties of the soil, the weathering, the hydrogeological situation, and the erosion by waves. The landslide susceptibility assessment based on this methodological approach has allowed for an appropriate and adequate consideration of the multiple factors affecting the stability and the optimization of planning and investment for land development in the city.     

离散裂隙渗流方法与裂隙化渗透介质建模

流体渗流模拟的连续介质方法通常适用于多孔地质体，并不一定适用于裂隙岩体，由于裂隙分布及其特征与孔隙差异较大。若流体渗流主要受裂隙的控制，对于一定尺寸的裂隙岩体，多孔介质假设则较难刻划裂隙岩体的渗流特征。离散裂隙渗流方法不但可直接用于模拟裂隙岩体非均质性和各向异性等渗流特征，而且可用其确定所研究的裂隙岩体典型单元体及其水力传导（渗透）张量大小。主要讨论了以下问题：（1）饱和裂隙介质中一般的离散流体渗流模拟；（2）裂隙岩体中的REV（典型单元体）及其水力传导（渗透）张量的确定；（3）利用离散裂隙网络流体渗流模型研究裂隙方向几何参数对水力传导系数和REV的影响；（4）在二维和三维离散裂隙流体渗流模型中对区域大裂隙和局部小裂隙的处理方法。调查结果显示离散裂隙流体渗流数学模型可用来评价不同尺度上的裂隙岩体的水力特征，以及裂隙方向对裂隙化岩体的水力特征有着不可忽视的影响。同时，局部小裂隙、区域大裂隙应当区别对待，以便据其所起的作用及水力特征，建立裂隙化岩体相应的流体渗流模型。