A numerical method for differential equations of second order

A new algorithm of order five is presented for the solution of the initial value problem where the system of ordinary differential equations is of second order and does not contain the first derivative.     

Freely floating-body simulation by a 2D fully nonlinear numerical wave tank

Nonlinear interactions between large waves and freely floating bodies are investigated by a 2D fully nonlinear numerical wave tank (NWT). The fully nonlinear 2D NWT is developed based on the potential theory, MEL/material-node time-marching approach, and boundary element method (BEM). A robust and stable 4th-order Runge–Kutta fully updated time-integration scheme is used with regriding (every time step) and smoothing (every five steps). A special φ_n-η type numerical beach on the free surface is developed to minimize wave reflection from end-wall and wave maker. The acceleration-potential formulation and direct mode-decomposition method are used for calculating the time derivative of velocity potential. The indirect mode-decomposition method is also independently developed for cross-checking. The present fully nonlinear simulations for a 2D freely floating barge are compared with the corresponding linear results, Nojiri and Murayama’s (Trans. West-Jpn. Soc. Nav. Archit. 51 (1975)) experimental results, and Tanizawa and Minami’s (Abstract for the 6th Symposium on Nonlinear and Free-surface Flow, 1998) fully nonlinear simulation results. It is shown that the fully nonlinear results converge to the corresponding linear results as incident wave heights decrease. A noticeable discrepancy between linear and fully nonlinear simulations is observed near the resonance area, where the second and third harmonic sway forces are even bigger than the first harmonic component causing highly nonlinear features in sway time series. The surprisingly large second harmonic heave forces in short waves are also successfully reproduced. The fully updated time-marching scheme is found to be much more robust than the frozen-coefficient method in fully nonlinear simulations with floating bodies. To compare the role of free-surface and body-surface nonlinearities, the body-nonlinear-only case with linearized free-surface condition was separately developed and simulated.     

基于神经网络的平底结构砰击压力预报

对利用神经网络预报平底结构入水砰击压力的方法进行了探讨。首先利用仿真软件计算各种情况下平底结构入水所产生的砰击压力，以此形成训练神经网络的数据集。其次利用数据集对三层反馈式网络进行了训练，讨论了不同隐含层节点数对该非线性系统的拟合能力，并且对梯度下降法、动量修正法和基于优化的LM算法的有效性和精度进行了比较，最后得出了适合平底结构入水砰击系统的网络结构。     

Fully nonlinear numerical wave tank (NWT) simulations and wave run-up prediction around 3-D structures

A finite-difference scheme and a modified marker-and-cell (MAC) algorithm have been developed to investigate the interactions of fully nonlinear waves with two- or three-dimensional structures of arbitrary shape. The Navier–Stokes (NS) and continuity equations are solved in the computational domain and the boundary values are updated at each time step by the finite-difference time-marching scheme in the framework of a rectangular coordinate system. The fully nonlinear kinematic free-surface condition is implemented by the marker-density function (MDF) technique developed for two fluid layers.To demonstrate the capability and accuracy of the present method, the numerical simulation of backstep flows with free-surface, and the numerical tests of the MDF technique with limit functions are conducted. The 3D program was then applied to nonlinear wave interactions with conical gravity platforms of circular and octagonal cross-sections. The numerical prediction of maximum wave run-up on arctic structures is compared with the prediction of the Shore Protection Manual (SPM) method and those of linear and second-order diffraction analyses based on potential theory and boundary element method (BEM). Through this comparison, the effects of non-linearity and viscosity on wave loading and run-up are discussed.     

Influence of large-diameter pipe pile driving on surrounding marine soils and adjacent submarine pipelines

Abstract

With the large-scale development and utilization of ocean resources and space, it is inevitable to encounter existing submarine facilities in pile driving areas, which necessitates a safety assessment. In this article, by referring to a wharf renovation project as a reference, the surrounding soil response and buried pipe deformation during pile driving in a near-shore submarine environment are investigated by three-dimensional (3D) numerical models that consider the pore water effect. Numerical studies are carried out in two different series: one is a case of a single pile focusing on the effect of the minimum plane distance of the pile–pipe, and the other is a case of double piles focusing on the effect of the pile spacing.     

渤海、黄海强温跃层数值预报模式

文中对前人关于水温垂直结构计算、模拟和预报研究成果进行了评价，并在此基础上建立了考虑海面吸收辐射和透射辐射、地形、风、海流、界面摩擦及其引起的混合作用的强温跃层三维数值预报模式。该模式运行的驱动量仅为风和气温场资料，因而具有较好的实用性；此外，从试报的结果看，效果是令人满意的。     

能量分析在台风短期预报业务中的应用

本文以９４１４、９４１５号两个连续北上台风为例，证明能量场的分布与台风移向有着明显的对应关系。     

GIS在处置地下管线突发事件中的应用研究——以苏州市地下综合管网应急处置系统为例

随着经济社会的不断发展,城市建设步伐不断加快。近几年,各类地下管线突发事件频发。通过"苏州市地下综合管网应急处置系统"项目的开发和实践,本文试图从总体上论述地下综合管网突发事件的处置过程、应用原理及相关的技术实现,重点阐述了基于"12345"便民服务中心工作平台,在充分利用GIS的网络分析技术的基础上,实现城市地下管网突发事件应急处置的自动化和信息化。     

Estimating hydraulic conductivity using grain-size analyses, aquifer tests, and numerical modeling in a riverside alluvial system in South Korea

Hydraulic conductivity (K) for an alluvial system in a riverbank filtration area in Changwon City, South Korea, has been studied using grain-size distribution, pumping and slug tests, and numerical modeling. The alluvial system is composed of layers: upper fine sand, medium sand, lower fine sand, and a highly conductive sand/gravel layer at the base. The geometric mean of K for the sand/gravel layer (9.89?×?10^?4 m s^?1), as determined by grain-size analyses, was 3.33 times greater than the geometric mean obtained from pumping tests (2.97?×?10^?4 m s^?1). The geometric mean of K estimates obtained from slug tests (3.08?×?10^?6 m s^?1) was one to two orders of magnitude lower than that from pumping tests and grain-size analyses. K estimates derived from a numerical model were compared to those derived from the grain-size methods, slug tests and pumping tests in order to determine the degree of deviation from the numerical model. It is considered that the K estimates determined by the slug tests resemble the uppermost part of the alluvial deposit, whereas the K estimates obtained by grain-size analyses and pumping tests are similar to those from the numerical model for the sand/gravel layer of the riverside alluvial system.     

地震综合效应场函数及其在地震预报中的应用──（一）地震综合效应场函数及其计算方法

在系统地分析了目前各种测震学地震预报方法科学思路的基础上,认为测震学地震预报方法基本上可以分为两大类。一类是以已经发生的一些地震作为未来可能发生的地震的“因”,即由于已经发生的地震对区域应力场的影响,导致未来发生较强地震。这一类包括的预报方法较多,如空区、条带、ｂ值、地震迁移、相关地震等等及其由此衍生出来的各种方法。另一类是把已经发生的一些地震作为区域应力场增强的“果”,即已经发生的地震是区域应力场增强过程中的一种反映,而未来地震不一定是已经发生的地震所导致的结果。这一类包括“地震窗口”、小震群活动等方法。针对第一类方法,各种预报方法都是力图从地震三要素中提取未来地震的信息,而具体作法又都是利用地震三要素这个多维空间的某个剖面。为了从地震活动诸要素的多维空间提取综合信息,我们对每个地震加入了破裂面方位,构成了地震第四要素,并依据地震４要素建立了地震综合效应场函数。地震综合效应场函数概括了多种测震学地震预报方法的科学思路和预报经验,从而可以形成测震学的综合预报方法。