丘陵地貌区高程内插适宜方法选择——以长春净月潭为例

对不同的地貌区进行空间内插时选择的适宜方法不同,以典型丘陵地貌区长春市净月潭地区的高程为研究对象,用ArcGIS 9.2分别作反距离权重法、最近邻点法、趋势面分析和克里金法做高程内插。应用交叉检验方法对其内插的精度作出分析,检验其科学性和可靠性,得出反距离权重法、最近邻点法、趋势面法、样条函数法和克里金法高程内插的不同精度,并对各种方法的适用性进行讨论。结果表明最近邻点法精度最高,以下依次为普通克里金插值法、样条函数、反距离权重法、趋势面法。为类似于净月潭地区的丘陵地貌区高程内插提供选择参考。     

四川省旅游气候舒适度评价

为了更好地发展旅游事业,本文以四川省2006~2016年21个站点的气象数据为基础数据,运用奥利弗温湿指数和IDW空间插值法对四川省旅游气候舒适度进行评价。结果表明:(1)从总体上看,四川省旅游气候舒适度差异显著,呈现出西部较高、东部较低的特征;(2)从季节上看,四川省春、秋季舒适度较高,最适合人们旅游;夏、冬季舒适度较差,最不适合旅游;(3)从旅游地上看,除了甘孜州、阿坝州和凉山州的最舒适时期为7月,最不舒适时期为1月。四川省典型旅游地最舒适时期大都为4月和10月,最不舒适时期主要为1月和7月。因此,除甘孜州,阿坝州和凉山州外,4月和10月四川省适合旅游;相反,1月和7月四川省不适合旅游。     

Point- and curve-based geometric conflation

Geometric conflation is the process undertaken to modify the coordinates of features in dataset A in order to match corresponding ones in dataset B. The overwhelming majority of the literature considers the use of points as features to define the transformation. In this article we present a procedure to consider one-dimensional curves also, which are commonly available as Global Navigation Satellite System (GNSS) tracks, routes, coastlines, and so on, in order to define the estimate of the displacements to be applied to each object in A. The procedure involves three steps, including the partial matching of corresponding curves, the computation of some analytical expression, and the addition of a correction term in order to satisfy basic cartographic rules. A numerical example is presented.     

航测数据处理中的空间插值方法比较

航测数据的航线间距与采样点间距差异很大,生成等值线时需要进行空间插值.以云南省江川地区的航测数据为实验数据源,分别采用反距离权重插值(IDW)、规则样条函数插值(Regularized Spline)、张力样条函数(Tension Spline)插值和Kriging插值等4种插值方法,对航测数据进行分析与比较,从中选出...     

考虑地形的空间插值算法在复杂下垫面地区气温和降水精细化插值的评估

为探索考虑地形的空间插值算法在复杂下垫面地区的适用性,利用重庆市区域自动气象站2017年逐月观测数据,采用Cokriging、PRISM和IDW三种算法进行了1 km分辨率插值试验,并分析对比了其在月累积降水、月平均气温插值中的误差。结果表明,当样本数量较多时,平均气温的插值以PRISM误差相对较小,Cokriging和IDW效果相当;对累积降水的插值,PRISM和Cokriging效果相当,并略优于IDW。三种算法的误差均随样本数量减少而增大,但PRISM的平均气温误差增长相对最慢,累积降水误差增长相对最快。当样本数量较少时,PRISM对气温插值的误差相对最小,而Cokriging对降水的插值误差相对最小。进一步分析表明:PRISM能显著减少复杂地形区的气温插值误差;累积降水插值主要受降水强度及降水局地性影响,考虑地形的插值算法并无明显优势。     

EGNOS模型在对流层延迟插值方法改进中的应用

在插值站与已知站平均高程面高差较大的情况下,传统的反距离加权内插法得到的对流层延迟值精度较差,因此提出了一种基于EGNOS模型的反距离加权插值方法。该方法通过EGNOS模型将对流层延迟改正值在高程方向上进行投影延拓。相对于传统内插法来说,可以避免较大高差带来的空间内插结构上的畸形。采用IGS站提供的对流层产品进行实验,结果表明该方法求得的对流层延迟改正精度相比于传统的反距离加权内插法有了显著提高,特别是对于高差较大的站点有很好的改进效果。     

Incorporation of principal component analysis,geostatistical interpolation approaches and frequency-space-based models for portraying the Cu-Au geochemical prospects in the Feizabad district,NW Iran

Delineation of mineralization-related geochemical anomalies of stream sediment data is an essential stage in regional geochemical exploration. In this study, principal component analysis (PCA) was applied to 12 selected elements to acquire a multi-element geochemical signature associated with Cu-Au mineralization in Feizabad district, NE Iran. The spatial distribution of enhanced multi-element geochemical signature of the second component (PC2) was modeled by different geostatistical procedures including variogram calculation, ordinary kriging (OK) and inverse distance weighting (IDW) interpolation techniques. Concentration-area (C-A) fractal and U-spatial statistics models were then applied to the continuous-value interpolated models for delineation of geochemical anomalies. Quantitative comparison of results based on the known mineral occurrences in the study area was carried out using normalized density index and success-rate curves. All generated models represent a high positive relation with known Cu (±Au) deposits in the study area, although, comparison of the results revealed that the OK-based U-spatial statistics model was superior to the rest of models. Besides, the low, moderate and high-intensity anomalies are spatially associated with geological-structural features in the study area.     

Geostatistics Analyst中空间内插方法的介绍

主流GIS软件ArcGIS 9的Geostatistics Analyst模块中所涉及的两大类空间内插方法:确 定性内插方法和地统计内插方法。结合该软件对各种插值方法的应用和处理进行了介绍,应用示例 比较各种内插方法的适用范围。     

MICROMINE IDW方法在福安堡钼矿储量估算中的应用

床位于舒兰市开原镇薛家村福安堡屯西火石顶子附近。矿区位于舒兰市91°方向26 km。该矿床属斑岩型钼矿床,矿石类型主要为蚀变似斑状二长花岗岩型,主要矿物为辉钼矿。资源储量估算是利用澳大利亚Micromine公司开发的MICROMINE 11.03来完成的,资源储量估算方法用IDW。文中详细地介绍了利用该软件进行储量估算的过程和方法。