回热损失对磁斯特林制冷循环制冷率的影响

从铁磁质的磁化强度一般表示式出发，探讨热阻和回热损失对磁斯特林制冷循环性能的影响，导出最大制冷率及其它性能参数。得到了结果适用于以顺磁质为工质的磁斯特林制冷循环。并指出在理想回热条件下的结论也适用于磁卡诺制冷循环。     

汽轮机回热系统给水焓升的最优分配

从汽轮机回热系统的实际情况出发，运用非线性规划理论和计算机技术，解决了给水焓升设计中的最优分配问题。结合具体实例，针对国产200MW汽轮机回热系统给水焓升的分配进行了说明。     

钢铁企业锅炉改造的可行性分析与实践

根据旧有锅炉存在的问题提出了改造方案，并对其进行可行性分析，选择了符合企业实际情况的改造方案，从而取得了良好的经济效益。     

A novel direct aerodynamically assisted threading methodology for generating biologically viable microthreads encapsulating living primary cells

In a recent discovery, coaxial electrospinning was explored to encapsulate living organisms within a continuous bio‐polymeric microthread from which active biological scaffolds were fabricated (Townsend‐Nicholson and Jayasinghe, Biomacromolecules 2006, 7, 3364). The cells were demonstrated to have gone through all expected cellular activity without their viability being compromised. These biologically active threads and scaffolds have direct and tremendous applicability from regenerative to therapeutic medicine. Currently these post‐processed cells as composite threads and scaffolds are being investigated in‐depth at a cellular level to establish if the processing methodology has any affect on the cellular make‐up. We now demonstrate a competing non‐electric field driven approach for fabricating composite threads and scaffolds influenced only by a differential pressure. We refer to this novel composite thread to scaffold fabrication methodology as coaxial aerodynamically assisted bio‐threading (CAABT). Our investigations firstly, demonstrate that this technique can process handle living organisms without biologically perturbing them in anyway. Secondly the process is elucidated as possessing the ability to form composite active threads from which biologically viable scaffolds are formed. Finally our study employs florescent activated cell sorting (FACScan), a method by which the cellular dynamics and viability are quantified on control and threaded cellular samples at two prescribed time points. In parallel with FACScan, optical comparison of cellular morphology at three time points within a period of three weeks is carried out to photographically observe any changes in the post‐processed cellular phenotype. Our developmental investigations into this novel aerodynamically assisted threading methodology has unearthed a unique biomicrofabrication approach, which joins cell electrospinning in the cell threading to scaffold fabrication endeavor. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

下运带式输送机液压制动系统的研究

首先对下运带式输送机的制动问题进行了分析,而后介绍了一种新型液压制动系统的基本原理、组成和用途,以及液压制动系统的控制要求和工作状态。实践结果表明,采用该液压制动系统从根本上保证了大倾角下运带式输送机的安全高效生产。     

Treatment of Stress Urinary Incontinence with Muscle Stem Cells and Stem Cell Components: Chances,Challenges and Future Prospects

Urinary incontinence (UI) is a major problem in health care and more than 400 million people worldwide suffer from involuntary loss of urine. With an increase in the aging population, UI is likely to become even more prominent over the next decades and the economic burden is substantial. Among the different subtypes of UI, stress urinary incontinence (SUI) is the most prevalent and focus of this review. The main underlying causes for SUI are pregnancy and childbirth, accidents with direct trauma to the pelvis or medical treatments that affect the pelvic floor, such as surgery or irradiation. Conservative approaches for the treatment of SUI are pelvic physiotherapy, behavioral and lifestyle changes, and the use of pessaries. Current surgical treatment options include slings, colposuspensions, bulking agents and artificial urinary sphincters. These treatments have limitations with effectiveness and bear the risk of long-term side effects. Furthermore, surgical options do not treat the underlying pathophysiological causes of SUI. Thus, there is an urgent need for alternative treatments, which are effective, minimally invasive and have only a limited risk for adverse effects. Regenerative medicine is an emerging field, focusing on the repair, replacement or regeneration of human tissues and organs using precursor cells and their components. This article critically reviews recent advances in the therapeutic strategies for the management of SUI and outlines future possibilities and challenges.     

交流变频调速的电气制动方式

本文详细阐述了交流变频调速系统中的四种电气制动方式，即直流制动、动力制动、回馈制动和共用直流母线多逆变器传动，并阐述了不同制动方式的适用范围及其选型和计算。     

电动汽车机电复合制动力分配策略研究

为了实现再生制动力与机械制动力在驱动轮和从动轮之间的优化分配,在保证车辆制动安全的同时提高能量回收效率,将汽车理想制动力分配I曲线与模糊算法相结合,提出一种基于模糊控制的电动汽车机电复合制动力分配策略。设计了电动汽车再生制动力分配模糊控制器,根据车辆工况与理想制动力分配I曲线,计算前后轮上分别应加载的机电复合制动力大小。建立了电动汽车制动系统动力学仿真模型,在此基础上进行仿真分析。最后利用Advisor仿真软件对该分配策略进行回收能量效率测试。结果表明,该分配策略既能保证汽车前后轮的制动力分配按照理想制动力I曲线分布,确保汽车的制动安全;又能有效地实现再生制动能量回收,提高电动汽车的续驶里程。     

一种自动往返小车的设计与制作

介绍自动往返小车的一种设计方法,给出了控制系统的硬件和软件设计。本设计以单片机为核心,以光电检测获得外部信号,采用PWM对小车的制动进行控制,以LED对行程和所用的时间进行显示。此设计电路成熟、工作稳定、容易实现控制。     

地铁再生制动储能装置参数设计

为了利用地铁列车制动过程产生的再生能量,维持牵引网电压的稳定,设计一种基于列车制动的超级电容型储能装置。根据北京地铁5号线的电动列车实际参数,通过对列车制动动力学和制动特性的对比和分析,更准确地计算出列车制动过程反馈到牵引网的再生能量;分析了储能装置的物理模型,根据限制条件确定了储能装置的主要参数和阵列配置;验证分析表明,该储能装置能满足地铁制动过程中各物理量的要求。