通用串行总线原理及其外设接口设计

以通用串行总线(USB)1.1为基础,讨论了USB的体系结构、工作原理、通信协议和相应的核心技术,并介绍了一种基于USB接口的数字摄像系统的设计方案及其软件、固件的设计.     

Determining stress intensity factors of composites using crack opening displacement

The main purpose of this paper is to find the mixed-mode stress intensity factors of composite materials using the crack opening displacement (COD). First, a series solution of the composite material with a crack was used to evaluate COD values. Then, the least-squares method was used to calculate mixed-mode stress intensity factors. This algorithm can be applied to any method that generates or measures COD values. The major advantage of this method is that COD values very near the crack tip are not necessary. Both finite element simulations and laboratory experiments were applied to validate this least-squares method with acceptable accuracy if the even terms of the series solution are removed.     

EPON:下一代接入网的最佳选择

EPON技术具有大带宽、高性价比、结构简单和一定服务质量保证等特点,被业界普遍看好,成为 下一代接入网的最佳候选技术.本文主要介绍了EPON的工作原理、分层结构、接入控制和组帧方式,最后给出 了实现EPON的关键技术和难点以及EPON的发展近况.     

水下成像的现状和发展动向

本文以下水成像在军事，海洋开发工程应用为基础，论述了水下观测和成像中采用微光电视摄像机和激光器件及其系统的技术现状和发展动向。     

视觉技术在YP19装封箱机中的设计与应用

介绍视觉技术在YP19装封箱机的装箱过程中的应用,简述视觉技术系统的基本组成、工作原理及软件设计。     

AFDX网络协议研究

介绍了AFDX网络的产生背景及发展历程;解析了ARINC664规范各个部分的功能及与开放式系统参考模型的关系;总结了AFDX网络相对于商用以太网的特点和AFDX网络与机载系统的关系,通过对AFDX在A380等飞机上的应用研究,归纳了基于AFDX网络的航空电子系统的特点;AFDX网络已成功应用于工程实践,该网络具有完整的协议结构,具有高实时性、高确定性和高可靠性的特点,是一种新型的机载网络总线。     

Coarse head pose estimation of construction equipment operators to formulate dynamic blind spots

Several hundred workers die in construction in the United States every year because equipment operators are unable to see their fellow workers during operation of their vehicle. In this paper we propose a step towards improving this situation by providing an automated method based on range imaging for estimating the coarse head orientation of a construction equipment operator. This research utilizes commercially-available low resolution range cameras to measure the continuously changing field-of-view (FOV) of an equipment operator in outdoor construction. This paper presents a methodology to measure so-called dynamic blind spot maps. The dynamic blind spot map is then projected on a known static equipment blind spot map that already exists to each construction vehicle. A robust computational coarse head pose estimation algorithm and results to three different pieces of construction equipment and multiple operators are presented. The developed method has the potential in automatically determining the spaces around vehicles that are currently not in the field-of-view of the vehicle operator thus providing eventually additional means and technology for improving safety in construction.     

电磁成形中的测量

本文简要介绍了电磁成形中放电电流、管坯与线圈间隙中的磁场测量 ,以及管坯动态变形过程测量的各种方法。通过各种方法的比较分析 ,得出分流器法测放电电流、探测线圈法测感生磁场是切实可行的方法。金属坯料在电磁力作用下的变形过程可用撞针法和高速摄影的办法进行测量 ,每种方法各有其优势和适用范围 ,测量时 ,根据实际情况进行选用。     

A novel method for camera external parameters online calibration using dotted road line

On board camera is the most important information source for driver assistant application which is based on computer vision. One problem for on board camera is that the external parameters are easy to be changed when moving on the road. Traditional method either calibrates external parameters offline or calibrates external parameters semi-online, which both need human intervention. By observation, it is found that corner connection of dotted road lane can form two groups of parallel lines. Using this geometric characteristics and through theoretical derivation, a novel online camera external parameter calibration method is proposed which focus on the situation when vehicle is moving. The pro of this method is that it maintains relatively high calculation accuracy and more important, it does not require any human intervention in whole calibration process. Experimental and comparison results show that this method is simple and have accurate results which fully meet the requirements of practical application.