Readout Techniques for Drift and Low Frequency Noise Rejection in Infrared Arrays

Three different methods are presented to subtract thermal drifts and low-frequency noise from the signal of infrared array. The first is dead pixels with open Indium bumps, the second is reference output as implemented on the Hawaii2 multiplexer, and the third is dark pixels to emulate reference cells having a capacity connected to the gate of the unit cell field-effect transistor (FET). The third method is the most effective and yields a reduction in readout noise from15.4–9.4 erms. A novel method will be described to extend this readout technique to the Aladdin 1 K × 1 K InSb array. This revised version was published online in July 2006 with corrections to the Cover Date.     

Use of Noise to Augment Training Data: A Neural Network Method of Mineral–Potential Mapping in Regions of Limited Known Deposit Examples

One of the main factors that affects the performance of MLP neural networks trained using the backpropagation algorithm in mineral-potential mapping isthe paucity of deposit relative to barren training patterns. To overcome this problem, random noise is added to the original training patterns in order to create additional synthetic deposit training data. Experiments on the effect of the number of deposits available for training in the Kalgoorlie Terrane orogenic gold province show that both the classification performance of a trained network and the quality of the resultant prospectivity map increasesignificantly with increased numbers of deposit patterns. Experiments are conducted to determine the optimum amount of noise using both uniform and normally distributed random noise. Through the addition of noise to the original deposit training data, the number of deposit training patterns is increased from approximately 50 to 1000. The percentage of correct classifications significantly improves for the independent test set as well as for deposit patterns in the test set. For example, using ±40% uniform random noise, the test-set classification performance increases from 67.9% and 68.0% to 72.8% and 77.1% (for test-set overall and test-set deposit patterns, respectively). Indices for the quality of the resultant prospectivity map, (i.e. D/A, D × (D/A), where D is the percentage of deposits and A is the percentage of the total area for the highest prospectivity map-class, and area under an ROC curve) also increase from 8.2, 105, 0.79 to 17.9, 226, 0.87, respectively. Increasing the size of the training-stop data set results in a further increase in classification performance to 73.5%, 77.4%, 14.7, 296, 0.87 for test-set overall and test-set deposit patterns, D/A, D × (D/A), and area under the ROC curve, respectively.     

图像噪声的Wiener谱分析

本文讨论图像处理过程中分析噪声的主要手段，RMS颗粒度，自相关函数，Wiener谱的定义和测试方法以及噪声仿真技术。     

Noise reduction and detection of weak, coherent signals through phase-weighted stacks

We present a new tool for efficient incoherent noise reduction for array data employing complex trace analysis. An amplitude-unbiased coherency measure is designed based on the instantaneous phase, which is used to weight the samples of an ordinary, linear stack. The result is called the phase-weighted stack (PWS) and is cleaned from incoherent noise. PWS thus permits detection of weak but coherent arrivals. The method presented can easily be extended to phase-weighted cross-correlations or be applied in the τ p domain. We illustrate and discuss the advantages and disadvantages of PWS in comparison with other coherency measures and present examples. We further show that our non-linear stacking technique enables us to detect a weak lower-mantle P -to- S conversion from a depth of approximately 840 km on array data. Hints of an 840 km discontinuity have been reported; however, such a discontinuity is not yet established due to the lack of further evidence.     

鄂尔多斯盆地南部的黄土塬区地震资料处理与解释,第一部分:地震资料处理

Branching river channels and the coexistence of valleys, ridges, hiils, and slopes＇as the result of long-term weathering and erosion form the unique loess topography. The Changqing Geophysical Company, working in these complex conditions, has established a suite of technologies for high-fidelity processing and fine interpretation of seismic data. This article introduces the processes involved in the data processing and interpretation and illustrates the results.     

基于A- CGAN的深反射地震数据随机噪声压制方法研究

基于深度学习的地震数据噪声压制方法是当前地震数据去噪处理的重要方向。深度学习方法突破了传统滤波处理的局限,在对常规地震数据的噪声压制中表现出效率高、信噪分离效果好的特点。但针对深部弱有效反射数据,当前的深度学习方法特征提取能力有限,难以取得较好的去噪效果。笔者等结合深反射地震数据特点,针对当前深度学习噪声压制方法在特征提取及对数据集依赖上的局限,提出了基于注意力循环生成对抗网络(Attention Cycle- Consistent Generative Adversarial Networks,A- CGAN)的深反射地震数据随机噪声压制方法。借助循环一致生成对抗网络(Cycle- Consistent Generative Adversarial Networks,Cycle- GAN)的域映射思想,降低对数据集的要求。为了构建适用于深反射地震数据的去噪网络,从3个方面对Cycle- GAN进行改进：在Cycle- GAN的生成器（去噪器）中加入残差结构和注意力机制,用于加深网络深度和提高其特征提取能力;在Cycle- GAN的鉴别器中使用块判决,提高鉴别精度和准确度;在损失函数部分加入感知一致性损失函数,提升网络模型恢复纹理细节信息的能力。通过合成地震数据和实际深反射地震数据测试,验证了优化算法的有效性,体现了良好的应用价值。     

绝对重力仪研制中几种干扰因素的实验研究

利用观测精度可达1～2×10-8ms-2_,的FG5 绝对重力仪,开展了空气阻力、有无隔震弹簧以及仪器自震对重力观测影响等观测实验.通过在环境干扰较小的九峰站观测实验,得到如下结论:在正常大气压状态下所观测到的空气阻力影响约500×10-5ms-2,比理论估算值大近30×105ms-2, 若在低真空状态测量空气阻力也将产生2.3×10-5 ms-2观测误差;落体室真空度维持系统(离子泵)工作不正常,空气阻力也将对重力观测造成0.1～4.1×10-5ms-2的观测误差;在地质条件比较稳定,环境震动干扰较小的基墩上测量,隔震弹簧的作用对观测结果影响不明显,但对测量精度影响较大.上述观测实验的进行,为自由下落法绝对重力仪的研制提供可靠依据.     

GM4型磁通门磁力仪性能检验方法

目前,磁通门磁力仪广泛应用于观测地球磁场相对变化的仪器。相对于应用,仪器的性能测试不为人们所熟悉。本文针对GM4型磁通门磁力仪的噪声特性,频率特性,线性度,温度特性等关键性能指标的测试依据、测试方法及流程给予详细的阐述。