Correction to: Accelerating Reactive Transport Modeling: On-Demand Machine Learning Algorithm for Chemical Equilibrium Calculations

Transport in Porous Media - In the original publication of the article, Table 2 was published incorrectly.     

Expansion of monomer units in poly(ethylene terephthalate) molecules under conditions of thermal and zero-point atomic vibrations

The temperature dependence of the expansion ?_C of trans conformers of the carbon skeleton of macromolecules in crystallized and amorphous poly(ethylene terephthalate) (PET) due to zero-point and thermal atomic vibrations is investigated by IR spectroscopy. It is found that the thermal expansion coefficient β_C jumpwise increases at the characteristic temperatures T _t and T _b. This increase is associated with the crossover from the quantum to classical statistics of torsional and bending vibration modes. The quantum and classical contributions to the expansion ?_C are determined for each mode. The quantum and classical contributions of the torsional vibrational mode in the amorphous polymer are approximately 1.5 times larger than those in the crystallized polymer. This effect is caused by an increase in the anharmonicity of torsional vibrations in the amorphous polymer.     

Spectra of second-order Raman scattering in porous silicon

Spectra of second-order Raman scattering in porous silicon are investigated. A band shift towards lower energies in second-order spectra is observed, as well as the correlation between the values of band shift in first-and second-order spectra. It is demonstrated that the observed effect cannot be interpreted using the conventional concepts of the mechanisms of scattering in microcrystalline samples. An interpretation of the revealed effect is suggested.     

Magnetic properties of HITPERM-type alloys at high temperature

(Fe,Co)–Zr,Hf)–Cu–B (HITPERM-type) alloys with variable Hf, Zr and Co content were isothermally crystallised at 500–650 °C for 1 h, and the optimum nanocrystallisation temperature was selected on the basis of the minimum coercive field at room temperature. The quasistatic hysteresis loops were measured at temperature from 20 to 650 °C. Subsequently, the optimally annealed alloys were subjected to long-term annealing at 500, 550 and 600 °C. Working temperature of 600°C is too high for the investigated alloys to maintain stable magnetic properties. Temperature of 550 or 500 °C permits the material to be magnetically stable for a long period. The magnetic hysteresis loops recorded for the nanocrystalline alloys, where Fe:Co ratio is close to 1 and refractory metals content is 7 at.%, prove that coercive field increases slightly with temperature, but remains in the range of 20–40 A/m (depending on the alloy composition) from 20 to 550 °C. This proves that the investigated alloys, after optimisation of chemical composition, may be suitable for high temperature use.     

Formation and magnetic properties of Co–Fe-based bulk metallic glasses with supercooled liquid region

A new Co–Fe-based ferromagnetic bulk metallic glass (BMG) was synthesized by copper mould casting method. The thermal stability and crystallization processes were investigated by differential scanning calorimetry (DSC) and X-ray diffraction (XRD). The soft magnetic behavior was studied by DC magnetic measurements. The high glass formation ability was interpreted in terms of the effective suppression of nucleation and growth of the intermetallic compounds which appear in the multicomponent system during solidification. The high thermal stability indicates that the new Co–Fe-based BMG could be used as high-temperature magnetic material. The low coercivity which was as low as 8 A/m for the as-cast sample was found in the Co–Fe-based metallic glass cylinder with a diameter of 1.5 mm.     

Photoreduction of nitrobenzene to aniline in “hybrid” photocatalytic systems

Irradiation of suspensions of CdS in water-ethanol mixtures containing nibrobenzene with light at > 320 run does not in practical terms lead to the reduction of the nitrobenzene to aniline. It has been shown that the formation of aniline occurs when solvato complexes of vanadium(III) (PhNH₂=18.1·10^–3) and vanadium(IV) (PhNH₂= 2.84·10^–3) are added to the system. The photocatalytic reduction of nitrobenzene is accompanied by oxidation of the alcohol to acetaldehyde and acetal. The proposed process mechanism includes stages and acceptance of an electron photogenerated in the semiconductor by vanadium compounds and of a hole by molecules of the alcohol and subsequent stages of reaction of the reduced forms of vanadium, and also of the ethoxy radicals with nitrobenzene, which leads to its reduction.Translated from Teoreticheskaya i Éksperimental'naya Khimiya, Vol. 25, No. 5, pp. 550–557, September–October, 1989.     

New photocatalysts: Dispersed semiconductor materials with microheterojunctions

We have obtained new semiconductor materials with microheterojunctions by substitution of surface cadmium ions in CdS by Cu(I), Cu(II), and Bi(III) ions. We have shown that the photocatalytic activity of their dispersions in the reaction of evolution of H₂ from alcohol-water mixtures is considerably higher than in the original cadmium sulfide.Translated from Teoreticheskaya i Éksperimental'naya Khimiya, Vol. 29, No. 3, pp. 270–274, May–June, 1993.We would like to acknowledge Academician V. D. Pokhodenko of the Academy of Sciences of Ukraine for drawing our attention to the prospects for investigation of complex photocatalytic systems based on semiconductors with different types of conductivity.     

Mechanism of the oxidative carbonylation of terminal alkynes at the ≡C-H bond in solutions of palladium complexes

The formation mechanism of the active catalyst in the oxidative carbonylation of terminal alkynes at the ≡C-H bond has been investigated for the catalytic system Pd(OAc)₂-PPh₃-p-benzoquinone (Q)-MeOH. It has been demonstrated by NMR spectroscopy, X-ray crystallography, and kinetic measurements that the catalytically active palladium is in the oxidation state 0 and is bound into complexes stabilized by p-benzoquinone (PdL₂Q, where L = PPh₃). A mechanism is suggested for the catalytic process, which includes the formation of the complex PdL₂Q, the oxidative addition of the alkyne to this complex at the ≡C-H bond, the insertion of CO into the Pd-C bond, and steps in which hydride hydrogen is intramolecularly transferred to the p-quinone.     

A desorption mass spectrometry study of the interaction of cinnamic acid with a silica surface

The interaction of cinnamic acid with the surface of highly dispersed silica is studied. The mechanisms of adsorption, chemisorption, and thermal transformations of cinnamic acid on the silica surface are proposed. The kinetic parameters of the chemical reactions on the surface of silica are calculated.