Propargyloxycarbonyl (Poc) as a protective group for the hydroxyl function in carbohydrate synthesis

[reaction: see text] The propargyloxycarbonyl (Poc) group can be used for the selective protection of the hydroxyl function in carbohydrates and can be removed under neutral conditions using tetrathiomolybdate MoS(4)(2-) (1) in CH(3)CN at room temperature. Under the conditions of deprotection benzylidine acetals, benzyl ethers, acetyl and levulinoyl esters, and allyl and benzyl carbonates are left untouched. It has also been shown that the new protective group (Poc) is compatible with acidic, basic, and also glycosylation conditions.     

Determination of trace metallic impurities in high-purity quartz by ion chromatography

A method has been developed for the determination of relevant trace impurities (alkali, alkaline and transition metals) in high purity quartz by ion-chromatography. In situ reagent (HF) purification and simultaneous sample dissolution was achieved in a multichannel vapour phase digestion assembly. Twenty-one samples can be digested at a time in this vapour phase system. Significant decrease in the process blank levels for all the analytes was observed. Drastic reduction (250 times) of NH4+ blank was achieved in the described vapour phase digestion, which enables the determination of trace concentration of sodium in high purity quartz. After volatilisation of the matrix and unreacted HF, the clear water leached solutions were injected into an ion-chromatograph equipped with conductivity detector for the determination of alkali and alkaline earth metals. In the case of transition metals, the trace residues were leached with 10 mM HCl and after separation on a mixed bed analytical column (IonPac CS5) were detected by spectrophotometry after post column derivatisation using 4-(2-pyridylazo)resorcinol (PAR). The accuracy of the result was checked by their comparison with those obtained by independent methods like inductively coupled plasma (ICP) MS and ICP atomic emission spectrometry. The achievable detection limits are between 0.4 ng/g (Li) and 22 ng/g (Mn). The application of the method to the determination of the above trace metals in two high-purity-grade quartz samples is demonstrated.     

Synthesis and Molecular Structures of Pyridine-Containing Large-Membered Cyclic Bis(alkoxy)silanes(1)

The new cyclic silanes [(C(5)H(3)N)(CH(2)O)(2)SiMe(2)](2) (1) and (C(5)H(3)N)(CH(2)CPh(2)O)(2)SiMe(2) (2) containing 16-membered and 10-membered rings, respectively, were prepared by the condensation reaction of Me(2)SiCl(2) with an appropriate pyridine diol in the presence of Et(3)N. X-ray studies show that the dimeric formulation for 1 represents a tetracoordinate cyclic silane, whereas 2 has a geometry halfway from a tetrahedron toward a trigonal bipyramid (TBP) as a result of Si-N(ax) donor action. (29)Si and (1)H NMR indicate retention of the coordination geometry for 2 in solution that undergoes rapid Si-N cleavage and ring rearrangement. In comparison with other silanes containing five- and six-membered rings that exhibit nitrogen or oxygen coordination, the presence of larger rings, as in 2 and related silanes having sulfur coordination, indicates that retention of donor action persists, thus largely ruling out ring size as a dominant factor controlling the possibility of donor action at silicon. The dimeric silane 1 crystallizes in the triclinic space group P&onemacr; with a = 6.347(3) ?, b = 12.455(4) ?, c = 14.289(5) ?, alpha = 101.63(3) degrees, beta = 102.99(3) degrees, gamma = 104.71(3) degrees, and Z = 2. The cyclic silane 2 crystallizes in the triclinic space group P&onemacr; with a = 9.733(4) ?, b = 10.938(2) ?, c = 14.312(3) ?, alpha = 89.03(2) degrees, beta = 74.59(3) degrees, gamma = 79.24(3) degrees, and Z = 2. The final conventional unweighted residuals are 0.040 (1) and 0.039 (2).     

Selective reduction of anomeric azides to amines with tetrathiomolybdate: synthesis of beta-D-glycosylamines

A number of beta-d-glycosyl azide derivatives undergo reduction on treatment with tetrathiomolybdate to produce the corresponding beta-d-glycosylamines exclusively without anomerization under very mild and neutral reaction conditions. Acetyl, allyl, benzoyl, and benzyl protective groups are left untouched under the reaction conditions. An exclusive selectivity in the reduction of anomeric azides is observed, while the C-2 and C-6 azides are left untouched.     

Highly selective deblocking of propargyl carbonates in the presence of propargyl carbamates with tetrathiomolybdate

Propargyloxycarbonyl chloride, 1, has been used to protect the hydroxyl and amino functionalities of amino alcohols and aminophenols in one pot using triethylamine or pyridine as a base. The increased reactivity of benzyltriethylammonium tetrathiomolybdate, 2, toward propargyl carbonates over propargyl carbamates is studied in detail and has been exploited further to develop an orthogonal protection strategy for the hydroxyl and amino functionalities. For example, 2-amino-1-butanol, 6a, was treated with 1 to get the N,O-diPoc compound 7a in 90% yield, which when treated with 1.1 equiv of 2 at room temperature removes the Poc group attached to oxygen while leaving the one attached to nitrogen intact to yield compound 8a in 85% yield. This particular observation offers a new protecting strategy where an amine and an alcohol group can be protected simultaneously in one pot, and in a later synthetic step, if the alcohol group has to be deprotected selectively, it can be achieved with 1 equiv of 2.     

Axial Site Occupancy by the Least Electronegative Ligands in Trigonal Bipyramidal Tetraoxyphosphoranes(1)

Analogous to the formation of CH(2)[(t-Bu)(2)C(6)H(2)O](2)P(Ph)(O(2)C(6)Cl(4)) (1), the new bicyclic tetraoxyphosphoranes CH(2)[(t-Bu)(2)C(6)H(2)O](2)P(Et)(O(2)C(6)Cl(4)) (3) and CH(2)[ClC(6)H(3)O](2)P(Ph)(O(2)C(6)Cl(4)) (4) were synthesized by the oxidative addition of the appropriate cyclic phosphines with o-tetrachlorobenzoquinone. For the formation of CH(2)[(t-Bu)(2)C(6)H(2)O](2)P(Ph)(O(2)C(2)Ph(2)) (2), a similar reaction was followed with the use of benzil (PhCOCOPh) in place of o-tetrachlorobenzoquinone. X-ray analysis of 1-3 revealed trigonal bipyramidal geometries and provided evidence for the first series of complexes in the absence of ring strain in which the least electronegative group, ethyl or phenyl, is located in an axial position, in violation of the electronegativity rule. Thus, the two oxygen-containing ring systems occupied two different sets of positions in the trigonal bipyramid (TBP) with the eight-membered rings at diequatorial sites. X-ray analysis of 4 revealed a trigonal bipyramidal geometry with electron-withdrawing chlorine substituents on each ring assumed the more conventional geometry with the rings occupying axial-equatorial positions and the phenyl group located in the remaining equatorial site. The fact that molecular mechanics calculations favorably reproduced the observed geometries suggests that a steric contribution associated with the ring tert-butyl groups for 1-3 is partly responsible in favoring diequatorial ring occupancy for the eight-membered ring. NMR data supported rigid pentacoordinated structures in solution at 23 degrees C. Phosphorane 1 crystallizes in the orthorhombic space group Fdd2 with a = 44.787(5) ?, b = 34.648(8) ?, c = 10.3709(9) ?, and Z = 16. Phosphorane 2 crystallizes in the orthorhombic space group Pna2(1) with a = 20.658(8) ?, b = 10.342(2) ?, c = 19.879(6) ?, and Z = 4. Phosphorane 3 crystallizes in the orthorhombic space group Pcmn with a = 9.807(2) ?, b = 16.632(4) ?, c = 23.355(3) ?, and Z = 4. Phosphorane 4 crystallizes in the monoclinic space group C2/c with a = 35.699(5) ?, b = 12.187(2) ?, c = 14.284(3) ?, beta = 107.08(1) degrees, and Z = 8. The final conventional unweighted residuals are 0.0395 (1), 0.0518 (2), 0.0540 (3), and 0.0868 (4).     

Bioanalytical method development,validation and quantification of dorsomorphin in rat plasma by LC‐MS/MS

The present investigation describes the development and validation of a sensitive liquid chromatography–mass spectrometry/mass spectrometry (LC‐MS/MS) method for the estimation of dorsomorphin in rat plasma. A sensitive LC‐MS/MS method was developed using multiple reaction monitoring mode, with the transition of m/z (Q1/Q3) 400.2/289.3 for dorsomorphin and m/z (Q1/Q3) 306.2/236.3 for zaleplon. Chromatographic separation was achieved on a reverse phase Agilent XDB C₁₈ column (100 × 4.6 mm, 5 µm). The mobile phase consisted of acetonitrile and 5 mm ammonium acetate buffer (pH 6.0) 90:10 v/v, at a flow rate of 0.8 mL/min. The effluence was ionized in positive ion mode by electrospray ionization (ESI) and quantitated by mass spectrometry. The retention times of dorsomorphin and internal standard were found to be 2.13 and 1.13 min, respectively. Mean extraction recovery of dorsomorphin and internal standard in rat plasma was above 80%. Dorsomorphin calibration curve in rat plasma was linear (r² ≥ 0.99) ranging from 0.005 to 10 µg/mL. Inter‐day and intra‐day precision and accuracy were found to be within 85–115% (coefficient of variation). This method was successfully applied for evaluation of the oral pharmacokinetic profile of dorsomorphin in male Wistar rats. Copyright © 2013 John Wiley & Sons, Ltd.     

Synthesis and Photochromic Properties of Configurationally Varied Azobenzene Glycosides

Spatial orientation of carbohydrates is a meaningful parameter in carbohydrate recognition processes. To vary orientation of sugars with temporal and spatial resolution, photosensitive glycoconjugates with favorable photochromic properties appear to be opportune. Here, a series of azobenzene glycosides were synthesized, employing glycoside synthesis and Mills reaction, to allow “switching” of carbohydrate orientation by reversible E/Z isomerization of the azobenzene N=N double bond. Their photochromic properties were tested and effects of azobenzene substitution as well as the effect of anomeric configuration and the orientation of the sugars 2-hydroxy group were evaluated.     

Tetraphenylethene‐Based Conjugated Fluoranthene: A Potential Fluorescent Probe for Detection of Nitroaromatic Compounds

This study reports the synthesis and photophysical properties of a star‐shaped, novel, fluoranthene–tetraphenylethene (TFPE) conjugated luminogen, which exhibits aggregation‐induced blue‐shifted emission (AIBSE). The bulky fluoranthene units at the periphery prevent intramolecular rotation (IMR) of phenyl rings and induces a blueshift with enhanced emission. The AIBSE phenomenon was investigated by solvatochromic and temperature‐dependent emission studies. Nanoaggregates of TFPE, formed by varying the water/THF ratio, were investigated by SEM and TEM and correlated with optical properties. The TFPE conjugate was found to be a promising fluorescent probe towards the detection of nitroaromatic compounds (NACs), especially for 2,4,6‐trinitrophenol (PA) with high sensitivity and a high Stern–Volmer quenching constant. The study reveals that nanoaggregates of TFPE formed at 30 and 70 % water in THF showed unprecedented sensitivity with detection limits of 0.8 and 0.5 ppb, respectively. The nanoaggregates formed at water fractions of 30 and 70 % exhibit high Stern–Volmer constants (K_sv=79 998 and 51 120 m ^?1, respectively) towards PA. Fluorescence quenching is ascribed to photoinduced electron transfer between TFPE and NACs with a static quenching mechanism. Test strips coated with TFPE luminogen demonstrate fast and ultra‐low‐level detection of PA for real‐time field analysis.     

Green Synthesis and Characterization of Hybrid Collagen–Cellulose–Albumin Biofibers from Skin Waste

Collagen (C) and cellulose are prominent biopolymers from the animal and plant kingdom and widely used in bioengineering. Albumin, on the other hand, is the most abundant plasma protein present in mammalian blood. In this work, collagen extracted from animal skin waste was blended with hydroxyethyl cellulose (HEC) and bovine serum albumin (A) and wet-spun to form hybrid biodegradable C/HEC/A fibers. They were further cross-linked with glutaraldehyde vapors and analyzed. X-ray diffraction and infra-red spectroscopic studies of the hybrid fibers display peaks corresponding to collagen, cellulose, and albumin. Incorporation of cellulose into the biopolymeric matrix leads to a reasonable improvement in mechanical, swelling, and thermal properties of hybrid fibers. Addition of albumin improves the regularity of fiber surface without altering the porosity as observed under a microscope. Hence, the formed hybrid biofibers can be potentially used as a suture material as well as for different biomedical applications due to their improved properties.