二氧化钒薄膜的低温制备及其性能研究

针对VO₂薄膜在微测辐射热计上的应用，采用射频反应溅射法，在室温下制备氧化钒薄膜；研究了氧分压对薄膜沉积速率、电学性质及成分的影响.通过调节氧分压，先获得成分接近VO₂的非晶化薄膜，再在400℃空气中氧化退火，便可制得高电阻温度系数，低电阻率的VO₂薄膜，电阻温度系数约为-4%/℃，薄膜方块电阻为R_□为100—300kΩ；薄膜在室温下沉积，400℃下退火的制备方法与微机电加工(micro electromechanic 关键词： 二氧化钒 电阻温度系数 氧分压 射频反应溅射法     

傅里叶变换红外光谱固体制样技术

通过对溴化钾与纳米固体超强酸样品的比例进行了探讨 ,得出制样时溴化钾与样品比例范围为1∶ 0 .0 0 1— 1∶ 0 .0 2 9,其最佳比例范围为 1∶ 0 .0 0 98— 1∶ 0 .0 1 5 ,并且应用于其他固体样品的测定 ,结果基本一致。同时得出 ,固体样品的最少检测量为 2 .0× 1 0 -5g     

Modular synthesis of chiral homo- and heterotrisoxazolines. Improving the enantioselectivity in the asymmetric Michael addition of indole to benzylidene malonate

A simple approach to a diverse set of chiral trisoxazolines is described. Deprotonation of bisoxazolines 2, followed by treatment of 2-chloromethyloxazolines 3, affords chiral trisoxazolines, including chiral homo- and hetero-trisoxazolines in good to high yields. These trisoxazolines are successfully applied in the asymmetric reaction of indole with benzylidene malonate, and ee's up to 93% were obtained.     

Highly regioselective rearrangement of 2-substituted vinylepoxides catalyzed by gallium(III) triflate

Gallium(III) triflate catalyzed the rearrangement of 2-substituted vinylepoxides into beta,gamma-unsaturated carbonyl compounds with high regio- and chemoselectivity (>97/3) in low catalyst loading (1-5 mol %). The alkyl-substituted trimethylsilylvinyl epoxides gave beta,gamma-unsaturated ketone, but aryl-substituted vinylepoxides gave the aldehydes instead.     

Synthesis and Crystal Structure of Binuclear Copper （Ⅱ） Complex Containing （Dimethylaminomethyl）ferrocene

1 INTRODUCTION Transition metal complexes with ferrocene are of considerable interest in the past fifty years because of their novel structures and special properties[1, 2]. The chemistry of ferrocene and its derivatives has become richer and richer in the last decade. Many complexes containing ferrocenyl have been synthesized and characterized[3～5]. Recently we have reported the synthesis and crystal structure of dibromo[1,1?bis(diphenylphosphino)- ferrocene]cadmium (Ⅱ)[6]. Herein we…     

Synthesis and mechanism research of an ethylene glycol-based sol-gel method for preparing PZT nanopowders

Lead zirconate titanate nanopowders Pb(Zr_0.52Ti_0.48)O₃ (PZT) were prepared by modified sol-gel process in ethylene glycol system with zirconium nitrate as the zirconium source. The research showed that it was critical to add lead acetate after the reaction of zirconium nitrate and tetrabutyl titanate in ethylene glycol system for preparing PZT of exact titanium content. The reaction mechanisms of the sol synthesis, preparation of xerogel and agglutinating process were characterized through using FT-IR, NMR, TG-FTIR, and GC-MS. The experiment proved that ethylene glycol system did not rely on hydrolysis and condensation reactions in the process of the sol formation, but on the formation of chain or network large molecules from complexation of ethylene glycol and all Ti and minor Pd, Zr. In the preparation of xerogel, the complexation reaction was so completed that it formed large molecules network composed of metal and dioxyethyl. Bulk weight loss happened before 350°C in the process of sintering xerogel to prepare PZT nanopowders. Volatile matters and vapor phase decomposition resultants were primarily oxy-compounds including ethylene glycol, aldehyde-ketone compounds, carbon dioxide and nitrate radical conversion matters. After 350°C, primary vapor phase decomposition resultants were carbon dioxide and minor carbonyl compound.     

囊泡表面分子间通讯交流体系的构建: 利用受体的分子识别行为调控酶的活性

在人工双层膜囊泡表面, 构建了一个通过人工受体的分子识别行为控制酶反应活性的超分子体系. 体系以生物体细胞信号转导系统为模拟原型, 由作为受体的烷基胺、被受体识别的信号分子吡哆醛衍生物、乳酸脱氢酶、受体和酶之间的媒介物Cu^2＋以及作为体系载体的合成肽脂囊泡五个成分构成．通过UV-vis光谱法及动态光散射测定对体系进行了评价, 结果表明: 随着受体疏水参数增大, 其对信号分子的识别能力增强, 二者呈良好的线性关系; 通过信号分子与囊泡表面静电相互作用的研究表明信号分子具有选择性; 媒介物与信号分子–受体可形成化学计量比为1∶2的配合物, 其形成能力比媒介物与酶的结合能力更强．作为结论, 体系中烷基胺受体对磷酸吡哆醛信号分子的识别有效控制了处于囊泡表面的乳酸脱氢酶的活性．     

新型无毒离子液体催化“一锅煮”合成3,4-二氢嘧啶-2(1H)-酮

利用新型无毒离子液体(BMImSac)作催化剂, 芳香醛、1, 3-二羰基化合物和尿素或硫脲三组分“一锅煮”合成了3,4-二氢嘧啶-2(1H)-酮. 与传统方法相比, 该法是一种操作简单、产率高、用时少的环境友好方法.     

Fabrication of large-scale ripples on fluorine-doped tin oxide films by femtosecond laser irradiation

The large-scale uniform self-organized ripples are fabricated on fluorine-doped tin oxide （FTO） coated glass by femtosecond laser. They can be smoothly linked in a horizontal line with the moving of XYZ stage by setting its velocity and the repetition rate of the laser. The ripple-to-ripple linking can also be realized through line-by-line scanning on a vertical level. The mechanism analysis shows that the seeding effect plays a key role in the linking of ripples.     

One inorganic-organic hybrid derived from reduced molybdophosphate and trinuclear cadmium(Ⅱ) fragment

One new polyoxometalate (POM)-based inorganic-organic hybrid [Cd3Ⅱ(HPO4)(Hbpp)(H2O)2]{CdⅡ[P4- Mo6O28H3.5(OH)3]2} (H4tpb)·7H2O (1) (bpp = 1,3-bis-(4-pyridyl)propane, tpb = 1,2,4,5-tetra(4-pyridyl)-benzene) constructed from reduced molybdophosphate [P4Mo6O28H3.5(OH)3]5.5- (P4Mo6), trinuclear CdⅡ-phosphate-Hbpp fragment and protonated tpb has been hydrothermally synthesized and structurally characterized by IR, elemental analyses and single crystal X-ray diffraction. The complex 1 crystallizes in the monoclinic system with the space group P21/c and cell parameters of a = 15.672(12)Å, b = 23.839(19)Å, c = 27.654(2)Å, β = 115.850(10)8, V = 9297.9(12) Å3, Z = 4, R1 = 0.0534 and wR2 = 0.1135. In complex 1, the P4Mo6 units are bridged by CdⅡ ions to form the classic sandwich-type [Cd(P4Mo6)2] dimers, which are further connected into a two dimensional network via the trinuclear CdⅡ subunits. The tpb is synthesized in situ from the bpp ligands and connects the adjacent 2D layers into a 3D supramolecular framework through hydrogen bonding interactions. The electrochemical and fluorescent properties of complex 1 have been investigated.