Development and Validation of LC-ESI-MS/MS Method for the Determination of Alfuzosin in Human Plasma

Journal of Analytical Chemistry - A new liquid chromatography-electrospray ionization tandem mass spectrometry (LC-ESI-MS/MS) method has been developed and validated for alfuzosin quantification in...     

Schwarz method justification of a coupling between finite elements and integral representation for Maxwell exterior problem

We are interested in the resolution of an exterior Maxwell problem in 3D using a coupling between finite elements and integral representation. This strategy is interpreted as a Schwarz method which suggests a preconditioner for Krylov solvers. Numerical results confirm the relevance of the resolution scheme.     

Radiation vulcanization of NR/SBR composite enhanced with different polyfunctional monomers

The effect of different polyfunctional monomers (PFMs) as enhancing agents on the properties of natural rubber/styrene-butadiene rubber blend reinforced with 40 (phr) part per hundred part of rubber, by weight of HAF carbon black and vulcanized with gamma irradiation was investigated. The coagents N,N’ methylene diacrylamide (MDA), trimethylol propane-trimethacrylate (TMPTMA) and trimethylol-methane tetraacrylate (TMMTA) were used at a constant content of 5 phr. The physico-chemical properties such as tensile strength, tensile modulus at 100 % elongation, elongation at break, gel fraction and swelling number were studied. The results indicated that the properties are greatly improved by PFMs at lower doses. TMMTA as coagent is more effective than TMPTMA and MDA.     

Preparation and evaluation of monolithic poly(N-vinylcarbazole-co-1,4-divinylbenzene) capillary columns for the separation of small molecules

Short-term polymerization or the so-called low-conversion polymerization was applied for the preparation of N-vinylcarbazole (NVC) and 1,4-divinylbenzene (DVB) monolithic capillary columns. The synthesis was carried out by thermally initiated free radical copolymerization under the influence of inert micro- (toluene) and macroporogen (1-decanol) and α,α′-azoisobutyronitrile (AIBN) as radical initiator. The morphological and porous properties were studied by scanning electron microscopy (SEM), nitrogen adsorption, and mercury intrusion porosimetry (MIP). The copolymerization process was studied by monomer conversion measurements. This approach led to increased porosity and specific surface area. A specific surface area above 400 m²/g of the monolith and a distinct bimodal pore size distribution were obtained. The chromatographic performance was determined in terms of theoretical plate heights and number of theoretical plates. The lowest plate height value was found to be 3.9 μm (corresponding to ≈256,000 plates per meter) applying methylparaben utilizing an 80 mm?×?0.2 mm i.d. monolithic capillary. The developed NVC/DVB monolithic supports showed high separation efficiency towards small molecules, which was exemplified applying reversed-phase (RP) separation of alkylbenzenes, beta-blockers, flavanoids, parabens, and phenones. The loading capacity was analyzed for isocratic separation of seven alkylbenzenes and was found to be up to 77 ng total mass of alkylbenzenes. Furthermore, a long-term stability test of 1,000 consecutive runs was performed and resulted in a maximum variance of 0.97, 0.85, and 0.16 % RSD for resolution, peak width at half height, and retention times, respectively. The material was proven to have a high permeability of 1.11E?14 m², applying water as a mobile phase.     

Sensitivity‐Enhanced 13C‐NMR Spectroscopy for Monitoring Multisite Phosphorylation at Physiological Temperature and pH

Abundant phosphorylation events control the activity of nuclear proteins involved in gene regulation and DNA repair. These occur mostly on disordered regions of proteins, which often contain multiple phosphosites. Comprehensive and quantitative monitoring of phosphorylation reactions is theoretically achievable at a residue‐specific level using ¹H‐¹⁵N NMR spectroscopy, but is often limited by low signal‐to‐noise at pH>7 and T>293 K. We have developed an improved ¹³Cα‐¹³CO correlation NMR experiment that works equally at any pH or temperature, that is, also under conditions at which kinases are active. This allows us to obtain atomic‐resolution information in physiological conditions down to 25 μm . We demonstrate the potential of this approach by monitoring phosphorylation reactions, in the presence of purified kinases or in cell extracts, on a range of previously problematic targets, namely Mdm2, BRCA2, and Oct4.     

Synthesis,characterization, speciation and biological studies on metal chelates of 1-benzoyl(1,2,4-triazol-3-yl)thiourea

Proton-ligand association constants of 1-benzoyl(1,2,4-triazol-3-yl)thiourea (BTTU) and its complex formation constants with some bivalent metal ions Ni(II), Co(II), Mn(II), Zn(II), and Cu(II), have been determined potentiometrically in 50% EtOH–H₂O and 0.1 M NaNO₃. The complexes formed in solution have a stoichiometry of 1:1 and 1:2 [M:L], where M represents the metal ion and L the BTTU ligand. The corresponding thermodynamic parameters are derived and discussed. The complexes are stabilized by enthalpy changes and the results suggest that complexation is an enthalpy-driven process. The effects of metal ion, ionic radius, electronegativity, and nature of ligand on the formation constants are discussed. The formation constants of the complexes with 3d transition metals follow the order Mn²⁺ < Co²⁺ < Ni²⁺ < Cu²⁺ > Zn²⁺. The metal complexes were synthesized and characterized by elemental analyses, conductance, IR, ¹H NMR, and magnetic measurements. The low magnetic moment of 0.11 BM for the Cu(II) complex is suggestive of dimerization through Cu–Cu interaction. The concentration distribution diagrams of the complexes were evaluated. The ligands and their metal complexes have been screened in vitro against some bacteria and fungi.     

Development and validation of a micellar high-performance liquid chromatographic method for determination of risedronate in raw material and in a pharmaceutical formulation: application to stability studies

A micellar HPLC method was developed for analysis of the antiosteoporosis drug risedronate. The analysis was carried out using a 250 x 4.6 mm id, 5 microm particle size C18 Waters Symmetry column. The mobile phase consisted of 0.02 M sodium dodecyl sulfate + 0.3% triethylamine + 10% n-propanol, prepared in 0.02 M orthophosphoric acid. The pH of the mobile phase was adjusted to pH 6.0, and it was pumped at a flow rate of 0.7 mL/min with UV detection at 262 nm. The method showed good linearity in the range of 2-80 microg/mL, with an LOD of 0.40 microg/mL (1.31 x 10(-6) M) and an LOQ of 1.21 microg/mL. The suggested method was successfully applied for the analysis of risedronate in raw material and a tablet formulation, with average recoveries of 99.91 +/- 1.30 and 101.52 +/- 0.30%, respectively. The stability-indicating capability of the proposed method was proved using forced degradation. By changing the pH of the mobile phase to 4.0, the oxidative degradation product could be separated from risedronate.     

A Quadratic Differential Identity with Generalized Derivations on Multilinear Polynomials in Prime Rings

Let R be a prime ring of characteristic different from 2, with right Utumi quotient ring U and extended centroid C, and let ${f(x_1, \ldots, x_n)}$ be a multilinear polynomial over C, not central valued on R. Suppose that d is a derivation of R and G is a generalized derivation of R such that $$G(f(r_1, \ldots, r_n))d(f(r_1, \ldots, r_n)) + d(f(r_1, \ldots, r_n))G(f(r_1, \ldots, r_n)) = 0$$ for all ${r_1, \ldots, r_n \in R}$ . Then either d =  0 or G =  0, unless when d is an inner derivation of R, there exists ${\lambda \in C}$ such that G(x) =  λ x, for all ${x \in R}$ and ${f(x_1, \ldots, x_n)^2}$ is central valued on R.     

Quantitative detection of phosphoproteins by combination of two-dimensional difference gel electrophoresis and phosphospecific fluorescent staining

Here we combine a standard two-dimensional difference gel electrophoresis (DIGE) protocol with subsequent post-staining of gels with phosphospecific fluorescent Pro-Q Diamond dye. The combination of these two methods for fluorescence detection of proteins allows quantitative detection of phosphoproteins in 2-DE-gels. We established this protocol within a functional proteomics experiment. Mammary epithelial cells (EpH4) were stimulated in culture by epidermal growth factor (EGF), endosomal fractions prepared after subcellular fractionation and phosphorylated proteins successfully detected on endosomes. For instance, Endo A cytokeratin, known as phosphoprotein and differentiation marker inducible by MAPK signaling, was identified by matrix-assisted laser desorption/ionization-time of flight-mass spectrometry (MALDI-TOF-MS). With this protocol, all steps of combined proteome and phosphoproteome profiling experiments are significantly simplified and accelerated, taking full advantage of both methods in terms of specificity, sensitivity and accuracy of quantification.     

Monolithic poly(glycidyl methacrylate-co-divinylbenzene) capillary columns functionalized to strong anion exchangers for nucleotide and oligonucleotide separation

In the present work, poly(glycidyl methacrylate-co-divinylbenzene) monoliths were synthesized and further derivatized to obtain strong anion exchange supports. Capillary monoliths (65 x 0.2 mm id) were prepared in situ by copolymerization of glycidyl methacrylate and divinylbenzene, employing 1-decanol and tetrahydrofuran as porogens. The free epoxy groups were derivatized in a two step synthesis to obtain quaternary ammonium functionalities. On testing the pressure stability of the synthesized monolith, a highly linear dependence between flow rate and pressure drop was obtained, indicating the high stability of the material even at high flow rates. The morphology of the copolymer was investigated by scanning electron microscopy. Mercury intrusion porosimetry showed a narrow pore size distribution, having a maximum at 439 nm. On recording a van Deemter plot the number of theoretical plates per meter was found to be 59324. The produced strong anion exchange monoliths turned out to be highly suitable for the separation of nucleotides and oligonucleotides.