Electrical and optical properties of fluorine-doped CdO films deposited by ultrasonic spray pyrolysis

The CdO:F samples have been deposited onto microscope glass substrates at 250 °C by ultrasonic spray pyrolysis method. With the incorporation of fluorine into CdO, the direct optical transition has shifted towards the shorter wavelengths, and the transparency of the material has increased at a given wavelength above the fundamental absorption edge. The shift in the absorption edge is explained by means of the Moss–Burstein effect, which is also supported with the results of the current–voltage characteristics. Here, a correlation has been established between the band broadening and the increase in conductivity due to the increase in carrier density.     

Swenson's operation for neonatal Hirschsprung's disease

OBJECTIVE: To describe our experience with Swenson's operation for Hirschsprung's disease done during the neonatal period. DESIGN: Retrospective study. SETTING: University department of paediatric surgery. SUBJECTS: 10 Neonates with Hirschsprung's disease. INTERVENTIONS: Rectosigmoidectomy and pull through (Swenson's operation), with covering transverse colostomy. MAIN OUTCOME MEASURES: Mortality, morbidity, and continence. RESULTS: The median age at definitive operation was 25 days (range 15-35). There was one late death three weeks after discharge from hospital of respiratory and cardiac failure. Two patients presented with caecal perforation and two with intestinal obstruction; in all four Hirschsprung's disease was diagnosed on frozen section, a transverse colostomy was done, and the Swenson's operation was done electively. The other six were diagnosed by barium enema examination and biopsy, and underwent total bowel irrigation followed by Swenson's operation and transverse colostomy. The colostomies were closed three to four weeks later. There were no postoperative complications. All nine surviving patients were continent (3-4 stools/day), at a mean (SD) follow up of 21 (5) months. CONCLUSION: With the current high standards of anaesthesia and neonatal intensive care, and an experienced surgeon, Swenson's operation for neonatal Hirschsprung's disease is safe and the procedure of choice for this condition.     

Subsurface Characterization at Ground Failure Sites in Adapazari, Turkey

Ground failure in Adapazari, Turkey during the 1999 Kocaeli earthquake was severe. Hundreds of structures settled, slid, tilted, and collapsed due in part to liquefaction and ground softening. Ground failure was more severe adjacent to and under buildings. The soils that led to severe building damage were generally low plasticity silts. In this paper, the results of a comprehensive investigation of the soils of Adapazari, which included cone penetration test (CPT) profiles followed by borings with standard penetration tests (SPTs) and soil index tests, are presented. The effects of subsurface conditions on the occurrence of ground failure and its resulting effect on building performance are explored through representative case histories. CPT- and SPT-based liquefaction triggering procedures adequately identified soils that liquefied if the clay-size criterion of the Chinese criteria was disregarded. The CPT was able to identify thin seams of loose liquefiable silt, and the SPT (with retrieved samples) allowed for reliable evaluation of the liquefaction susceptibility of fine-grained soils. A well-documented database of in situ and index testing is now available for incorporating in future CPT- and SPT-based liquefaction triggering correlations.     

Improvement of flexural bond strength of zirconia-resin cement by surface patterning using sub-nanosecond UV laser

Zirconia is a dental material that shows excellent biocompatibility and high strength in clinical applications. This study aims to evaluate the effects of ultrafast laser applications. The surface nanostructures were classified into three groups. Group 1 was generated using the burst mode, with three different distances between dots: 52 µm (Group 1a), 104 µm (Group 1b), and 156 µm (Group 1c). Group 2 was processed using the scanning mode configuration, with a set of parallel lines. Group 3 was also processed using this scanning configuration creating a set of square-shaped patterning. Group 4 was the control group. After the surface treatments, a pair of zirconia specimens was bonded end to end with resin cement. Flexural bond strength (FBS) test was applied in a universal test machine. Multiple comparisons were performed using a one-way analysis of variance and the Tukey's HSD test. All the samples that were treated with the laser showed higher FBS values than the untreated surface. Using the burst mode, preformed circular-shaped surface on an angle of 90⁰ at 52 µm distance (Group 1a) showed the highest FBS values among all groups (p < .05). Groups 2 and 3 had significantly higher values than 1b and 1c.     

Using heuristic algorithms for capacity leasing and task allocation issues in telecommunication networks under fuzzy quality of service constraints

Nowadays, every firm uses telecommunication networks in different amounts and ways in order to complete their daily operations. In this article, we investigate an optimisation problem that a firm faces when acquiring network capacity from a market in which there exist several network providers offering different pricing and quality of service (QoS) schemes. The QoS level guaranteed by network providers and the minimum quality level of service, which is needed for accomplishing the operations are denoted as fuzzy numbers in order to handle the non-deterministic nature of the telecommunication network environment. Interestingly, the mathematical formulation of the aforementioned problem leads to the special case of a well-known two-dimensional bin packing problem, which is famous for its computational complexity. We propose two different heuristic solution procedures that have the capability of solving the resulting nonlinear mixed integer programming model with fuzzy constraints. In conclusion, the efficiency of each algorithm is tested in several test instances to demonstrate the applicability of the methodology.     

Corrosion behavior of tempered dual-phase steel embedded in concrete

Dual-phase(DP) steels with different martensite contents were obtained by appropriate heat treatment of an SAE1010 structural carbon steel,which was cheap and widely used in the construction industry. The corrosion behavior of DP steels in con-crete was investigated under various tempering conditions. Intercritical annealing heat treatment was applied to the reinforcing steel to obtain DP steels with different contents of martensite. These DP steels were tempered at 200,300,and 400°C for 45 min and then coo...     

Leaching of a copper flotation concentrate with ammonium persulfate in an autoclave system

The leaching behavior of a copper flotation concentrate was investigated using ammonium persulfate （APS） in an autoclave systee. The decomposition products of APS, active oxygen, and acidic medium were used to extract metals from the concentrate. Leaching experiments were performed to compare the availability of APS as an oxidizing agent for leaching of the concentrate under atmospheric conditions and in an autoclave system. Leaching temperature and APS concentration were found to be important parameters in both leaching systems. Atmospheric leaching studies showed that the metal extractions increased with the increase in APS concentration and temperature （up to 333 K）. A similar tendency was determined in the autoclave studies up to 423 K. It was also determined that the metal extractions decreased at temperatures above 423 K due to the passivation of the particle surface by molten elemental sulfur. The results showed that higher copper extractions could be achieved using an autoclave system.     

Thermocapillary Flow and Coalescences of Heterogeneous Bubble Size Diameter in a Rotating Cylinder: 3D Study

Two dimensional axisymmetric and three-dimensional VOF simulations of gas/liquid transient flow were performed using a multiphase flow algorithm based on the finite-volume method. The results for motion of a multiple bubbles of a heterogeneous sizes aligned horizontally and perpendicular to a hot surface incorporating thermocapillary forces in a rotating liquid in a zero-gravity environment have been presented for the first time. No bubbles broke in any of the cases observed. The results also show that collision and agglomeration of bubbles of unequal sizes diameter are different from those of similar size diameters presented from earlier research work of Alhendal et al. Acta Astronaut. 117, 484–496 (2015). Different flow patterns such as thermocapillary bubble migration, collision, and stream function were observed and presented for the 2-D and 3-D models.