Bovidae-based gelatin: Extractions method,physicochemical and functional properties,applications, and future trends

Gelatin is one of the most important multifunctional biopolymers and is widely used as an essential ingredient in food, pharmaceutical, and cosmetics. Porcine gelatin is regarded as the leading source of gelatin globally then followed by bovine gelatin. Porcine sources are favored over other sources since they are less expensive. However, porcine gelatin is religiously prohibited to be consumed by Muslims and the Jewish community. It is predicted that the global demand for gelatin will increase significantly in the future. Therefore, a sustainable source of gelatin with efficient production and free of disease transmission must be developed. The highest quality of Bovidae-based gelatin (BG) was acquired through alkaline pretreatment, which displayed excellent physicochemical and rheological properties. The utilization of mammalian- and plant-based enzyme significantly increased the gelatin yield. The emulsifying and foaming properties of BG also showed good stability when incorporated into food and pharmaceutical products. Manipulation of extraction conditions has enabled the development of custom-made gelatin with desired properties. This review highlighted the various modifications of extraction and processing methods to improve the physicochemical and functional properties of Bovidae-based gelatin. An in-depth analysis of the crucial stage of collagen breakdown is also discussed, which involved acid, alkaline, and enzyme pretreatment, respectively. In addition, the unique characteristics and primary qualities of BG including protein content, amphoteric property, gel strength, emulsifying and viscosity properties, and foaming ability were presented. Finally, the applications and prospects of BG as the preferred gelatin source globally were outlined.     

Multicomponent Diamond-Like Semiconductors Based on the InBV–CdS System: Bulk and Surface Properties

Semiconductors - According to developed methods, in the fields of the mutual solubility of initial binary compounds (InP, InSb, and CdS), solid solutions of the InP–CdS and InSb–CdS...     

Optimization of waste quail eggshells as biocomposites for polyaniline in ammonia gas detection

A simple, cost-effective, and novel chemical sensor for ammonia (NH₃) gas detection was developed from polyaniline (PANI)/quail eggshell (QES) composites. QES is a natural waste enriched in calcium carbonate. In this work, pure PANI was synthesized from chemical oxidation method and PANI/QES composites were prepared from physical mixing of QES with the synthesized PANI at different mass ratio. A series of complementary techniques including Fourier transform infrared and ultraviolet-visible spectrometers, scanning electron microscope with energy dispersive detection coupled with mapping, thermogravimetric analysis, and X-ray diffractometer were used to characterize the physicochemical and textural properties of the biocomposites. From the results, PANI/QES composite with a mass ratio of 1 exhibited the lowest NH₃ detection limit of 5.24 ppm with a linear correlation coefficient (R²) of close to unity (0.9932) between the signal and NH₃ gas concentration. As a whole, the PANI/QES biocomposites synthesized from this work exhibited excellent selectivity toward NH₃ gas even in the presence of other gas impurities, such as acetone, ethanol, and hexane. For the sensor reusability, the PANI/QES biocomposites can be reused in the application of NH₃ gas detection for at least 4 cycles.     

Review on zirconate-cerate-based electrolytes for proton-conducting solid oxide fuel cell

The performance of low-to-intermediate temperature (400–800?°C) solid oxide fuel cells (SOFCs) depends on the properties of electrolyte used. SOFC performance can be enhanced by replacing electrolyte materials from conventional oxide ion (O^2-) conductors with proton (H⁺) conductors because H⁺ conductors have higher ionic conductivity and theoretical electrical efficiency than O^2- conductors within the target temperature range. Electrolytes based on cerate and/or zirconate have been proposed as potential H⁺ conductors. Cerate-based electrolytes have the highest H⁺ conductivity, but they are chemically and thermally unstable during redox cycles, whereas zirconate-based electrolytes exhibit the opposite properties. Thus, tailoring the properties of cerate and/or zirconate electrolytes by doping with rare-earth metals has become a main concern for many researchers to further improve the ionic conductivity and stability of electrolytes. This article provides an overview on the properties of four types of cerate and/or zirconate electrolytes including cerate-based, zirconate-based, single-doped cerate–zirconate and hybrid-doped cerate–zirconate. The properties of the proton electrolytes such as ionic conductivity, chemical stability and sinterability are also systematically discussed. This review further provides a summary of the performance of SOFCs operated with cerate and/or zirconate proton conductors and the actual potential of these materials as alternative electrolytes for proton-conducting SOFC application.     

Studies on influence of hydrogen and carbon monoxide concentration on reduction progression behavior of molybdenum oxide catalyst

Temperature programmed reduction (TPR) analysis was applied to investigate the chemical reduction progression behavior of molybdenum oxide (MoO₃) catalyst. The composition and morphology of the reduced phases were characterized by X-ray diffraction spectroscopy (XRD), X-ray photoelectron spectroscopy (XPS), and field emission scanning electron microscopy (FE-SEM). The reduction progression of MoO₃ catalyst was attained with different reductant types and concentration (10% H₂/N₂, 10% and 20% CO/N₂ (%, v/v)). Two different modes of reduction process were applied. The first approach of reduction involved non-isothermal mode reduction up to 700 °C, while the second approach of reduction involved the isothermal mode reduction for 60 min at 700 °C. Hydrogen temperature programmed reduction (H₂-TPR) results showed the reduction progression of three-stage reduction of MoO₃ (Mo⁶⁺ → Mo⁵⁺ → Mo⁴⁺ → Mo⁰) with Mo⁵⁺ and Mo⁴⁺. XRD analysis confirmed the formation of Mo₄O₁₁ phase as an intermediate phase followed by MoO₂ phase. After 60 min of isothermal reduction, peaks of metallic molybdenum (Mo) appeared. Whereas, FESEM analysis showed porous crater-like structure on the surface cracks of MoO₂ layer which led to the growth of Mo phase. Meanwhile, the reduction of MoO₃ catalyst in 10% carbon monoxide (CO) showed the formation of unstable intermediate phase of Mo₉O₂₆ at the early stage of reduction. Furthermore, by increasing 20% CO led to the carburization of MoO₂ phase, resulted in the formation of Mo₂C rather than the formation of metallic Mo, as confirmed by XPS analysis. Therefore, the presented study shows that hydrogen gave better reducibility due to smaller molecular size, which contributed to high diffusion rate and achieved deeper penetration into the MoO₃ catalyst compared to carbon monoxide reductant. Hence, the reduction of MoO₃ in carbon monoxide atmosphere promoted the formation of Mo₂C which was in agreement with the thermodynamic assessment.     

Anaphylaxis in Association with Heparin-Induced Thrombocytopenia

Heparin is almost universally used as an anticoagulant during hemodialysis. Rare but serious side effects of heparin therapy include heparin‐induced thrombocytopenia (HIT) and anaphylaxis, and these may lead to significant mortality and morbidity if left unrecognized. We are reporting a patient who developed HIT followed by an anaphylactoid reaction. This 8‐year‐old girl with Joubert's syndrome developed end‐stage renal disease secondary to nephronophthisis. She had a Permacath double‐lumen hemodialysis catheter placed in the right internal jugular vein and was started on hemodialysis using an Asahi B10 65 Dialyzer on 1/28/03. The platelet count at that time was 246 × 10³/mL. Beef lung heparin was used for anticoagulation. She was admitted for living related donor renal transplant on 2/10/03 but was found to be thrombocytopenic with a platelet count of 49 × 10³/mL. The transplant was postponed, a sepsis work‐up was performed, and she was started on antibiotics pending culture results. Hemodialysis was continued with heparin anticoagulation, and despite an improvement in the platelet count she had an acute anaphylactoid reaction 2 days later. The reaction occurred 20 min after starting her hemodialysis treatment and presented as acute onset of bronchospasm, agitation, and chest discomfort. She improved with nebulized albuterol and subcutaneous epinephrine. A review of her records revealed that she had received 6 hemodialysis treatments. The platelet count on 2/3/03, after 3 hemodialysis treatments, had been 242 × 10³/mL and on 2/8/03 after 5 treatments the platelet count was 72 × 10³/mL. HIT with anaphylaxis was suspected. Heparin was discontinued and the platelet count had returned to normal within 2 days. The diagnosis was confirmed by a positive heparin‐associated antibody test. While HIT is recognized as a complication in 1–5% of patients treated with heparin and has been well described in the literature, we could only find 2 reported cases of heparin‐induced anaphylaxis and in both cases there was accompanying thrombocytopenia. This patient further illustrates a possible linkage between these two phenomena. HIT is an important cause of thrombocytopenia in a patient on hemodialysis and continued exposure to heparin may induce anaphylaxis.     

Liquid-gel partitioning using Lipidex in the determination of polychlorinated biphenyls in cod liver oil

A technique was developed for transfer of fat and polychlorinated biphenyls from cod liver oil into the lipophilic gel Lipidex 5000. Subsequent elution of the gel separated about 60% of the fat from the sample. Following further purification on aluminium oxide and silica gel, toxic non-ortho- and mono-ortho-PCB congeners were isolated in two separate fractions on charcoal. Recoveries were studied by addition of twelve different PCB congeners to 0.2 g of fat. The non-ortho-PCBs were labelled with 13C. The recoveries of 5-50 ng of the unlabelled compounds were 80-100% and those of 50-100 pg of the labelled compounds were 76-106%.     

Temporal and Spatial Assessment of Supply and Demand of the Water-yield Ecosystem Service for Water Scarcity Management in Arid to Semi-arid Ecosystems

Water scarcity is one of the problems affecting people’s livelihoods in arid and semi-arid areas, requiring a sustainable balance between water demands and water resources. This study was carried out to assess temporal and spatial distribution of water supply and demand in order to help managers to overcome water scarcity in Jiroft basin, southeastern Iran. Spatial supply and demand of water were mapped and standardized rainfall index (SPI) was used to assess drought for a 20 years period (1994–2014). Supply and demand of water were matched in 23% of the basin area, mostly concentrated in the cold zones. Water supply was reduced up to 80% during dry years, declining water supply-demand matching to 5% of the basin area. Shrub-grass rangelands and deciduous woodlands were the most valuable land covers for conservation with $ 1,100 and $ 936 per hectare water prices respectively. Water value dropped more than 72% in mismanaged ecosystems (p?<?0.01). Our finding showed that water supply-demand ratio can be used as a proxy of ecosystem health and water-yield, which can provide a good information for water resources managers to reduce the threats of water scarcity in arid and semi-arid regions.