铝合金熔炼铸造能源与资源节约

在铝材生产中,熔炼、铸造工序是能源与资源消耗多的工序,因此,节约资源、降低烧损与能耗有着重要意义。降低能耗还可以相应地减少温室气体与有害、有毒物质排放,对环保有利。中国当前铝合金熔炼铸造能源与资源节约的主要措施:调整加工用锭坯供应结构,大幅提高电解铝厂供应的锭坯,由2013年供应的42%提高到"十三五"末的65%-70%;加快走出去的力度,到国外去办铝厂,将在国外生产的铝合金锭坯运回来,争取2020年出口的铝材与铝制品全部以进口锭坯加工,这是最大的资源与能源节约;加强废铝回收与有效再生利用;加强创新,大力采用新装备、新技术与新工艺;加强管理,精心操作,管理中还有较大的能源与资源节约潜力。     

Rectangular Section Control Technology for Silicon Steel Rolling

Rectangular section control technology(RSCT)was introduced to achieve high-precision profile control during silicon steel rolling.The RSCT principle and method were designed,and the whole RSCT control strategy was developed.Specifically,RSCT included roll contour design,rolling technology optimization,and control strategy development,aiming at both hot strip mills(HSMs)and cold strip mills(CSMs).Firstly,through the high-performance variable crown(HVC)work roll optimization design in the upper-stream stands and the limited shifting technology for schedule-free rolling in the downstream stands of HSMs,a hot strip with a stable crown and limited wedge,local spot,and single wave was obtained,which was suitable for cold rolling.Secondly,an approximately rectangular section was obtained by edge varying contact(EVC)work roll contour design,edge-drop setting control,and closed loop control in the upper-stream stands of CSMs.Moreover,complex-mode flatness control was realized by coordinating multiple shape-control methods in the downstream stands of CSMs.In addition,the RSCT approach was applied in several silicon-steel production plants,where an outstanding performance and remarkable economic benefits were observed.     

锚栓用量对纯锚固岩棉保温系统抗风压性能的影响

采用ETAG 004:2013《外墙外保温薄抹灰系统欧洲技术认证指南》中规定的静态泡沫块法,测试在单位面积上使用不同数量锚栓的岩棉板外保温系统的抗风压性能。通过试验可以得出:在混凝土墙体上单纯采用敲击式锚栓锚固岩棉板外保温系统时,拉伸强度可达12.9 k Pa;单位面积增加锚栓的使用量可以提高系统的抗拉承载力,但在不同条件下增加相同数量锚栓对系统抗风载能力提高的程度不同;在普通混凝土墙中,单纯锚固岩棉板保温系统破坏时,单个锚栓承载力平均值的最大值约为其拉拔承载力的50.3%。     

陕南山地烟田不同植烟年限土壤养分的变化

为给陕南山地烟草生产布局及有针对性的施肥措施提供依据,分析了陕南山地烟田不同植烟年限(0~15年)与土壤养分含量的关系。结果表明:随着植烟年限延长,有机质线性下降,全氮和速效钾显著上升,有效磷先上升后下降;氯、有效铁、有效锰、有效硼和有效铜无显著变化或变化很小,有效锌则在第1年急剧下降,之后保持稳定,10年后再次显著下降。认为陕南山地烟区烟叶生产中应适当增加有机肥的施用而合理控制氮肥、磷肥和钾肥的施用,并要注意锌肥的补充。     

基于桥连接的词典学习方法的语义解析

现阶段的语义解析方法大部分都基于组合语义,这类方法的核心就是词典。词典是词汇的集合,词汇定义了自然语言句子中词语到知识库本体中谓词的映射。语义解析一直面临着词典中词汇覆盖度不够的问题。针对此问题,该文在现有工作的基础上,提出了基于桥连接的词典学习方法,该方法能够在训练中自动引入新的词汇并加以学习,为了进一步提高新学习到的词汇的准确度,该文设计了新的词语—二元谓词的特征模板,并使用基于投票机制的核心词典获取方法。该文在两个公开数据集(WebQuestions和Free917)上进行了对比实验,实验结果表明,该文方法能够学习到新的词汇,提高词汇的覆盖度,进而提升语义解析系统的性能,特别是召回率。     

锦纶长丝染色均匀度判色新方法

锦纶长丝的染色均匀度测试方法一直是采用人工判色方法,其判色结果会因人眼目光的不同导致经常会存在一定的误差,对企业节约成本和实际生产应用相当不利。本文提出了一种利用测试锦纶DTY长丝热收缩应力的方法,用热应力测试结果对锦纶染色性能进行预判,不需要进行织袜染色,为企业节约大量的人工成本。     

浅谈客运机车走行部风险调研及对策

针对机车走行部关键部位存在的风险及日常机车运用和检修存在的问题,进行了调查分析并提出预防对策,保证了机车走行部的运行安全。     

Elucidation of colour development and microstructural characteristics of Allium sativum fumigated with acetic acid

It has been well known that the greening of Allium sativum cloves could be formed after immersed in acetic acid solution. Nonetheless, no investigation was reported on colour development of A. sativum in response to acetic acid vapour until now. In this study, the brief exposure of A. sativum to acetic acid vapour (200–400 ppm) was combined with controlled atmosphere (5%, 20% and 80% CO₂) packaging storage to break cell membrane and green garlic. The garlic bulbs were fumigated with acetic acid before controlled CO₂ atmosphere packaging for 25 days at 4 °C. Fumigation with 200 ppm acetic acid followed by high CO₂ atmosphere packaging (80% CO₂) facilitated the garlic greening. It was also verified that γ‐glutamyl transpeptidase was involved in garlic greening in present study, and the compromise of glacial acetic acid vapour fumigation and CO₂ gas atmosphere in package stored at low temperature could result in garlic greening as well.     

纳米AlN粉末的制备与烧结

利用低温燃烧合成前驱物制备出平均粒度为100 nm的AlN陶瓷粉末,比较了该粉末的常压烧结和放电等离子烧结的特性.实验表明:以合成的AlN粉末为原料,添加5%(质量比)Y2O3作为烧结助剂,在常压、流动N2气氛下1600℃保温3 h,制备出平均晶粒尺寸为4～8 μm、密度为3.28 g·cm-3的AlN陶瓷;将同样的粉末不加任何烧结助剂,采用SPS技术在1600℃保温4 min,得到密度为3.26 g·cm-3的AlN陶瓷,晶粒度约为1～2μm.     

忠武输气管道悬索跨越设计创新及探讨

忠武输气管道有4次悬索跨越,分别是蚂蝗溪悬索跨越、木龙河悬索跨越、马水河悬索跨越、野三河悬索跨越。文章介绍了这几座悬索跨越管桥设计中采用的多项新技术,如采用热聚乙烯半平行钢丝索代替以往的钢丝绳;采用钢管塔架代替以往的角钢塔架;根据地形地貌特点变换风索型式或取消塔架等。这些新技术、新设计在工程中均取得了良好的效果。另外,文章还针对悬索跨越桥面结构型式、预拱度设置、不对称荷载的影响、风索基础的设置等问题进行了探讨。