溶剂浸渍树脂的萃取分离性能研究

介绍了溶剂浸渍树脂的制备及性能,阐述了溶剂浸渍树脂在产物提纯和废水处理等分离过程中的应用,并对使用溶剂浸渍树脂处理含酚废水进行了初步研究.     

Flocculation morphology: effect of particulate shape and coagulant species on flocculation.

Flocculation morphology is a new concept that investigates the morphological characteristics of colloidal particles and coagulants in water during the flocculation process, and the influence that these characteristics have on flocculation process efficiency. This paper is a summary of advances in research on this topic over several years. Morphological characteristics of colloids in natural waters and different kinds of hydrolysed coagulants are investigated, and their effect on colloid stability, flocculation kinetics and efficiency is analysed. It is confirmed that the traditional theory has some deviations in coagulation of nonspherical particles, and these deviations are revised by the flocculation morphology model. Flocculation morphology can not only promote research about flocculation theory, but also instruct the production, application and flocculation control. It can be foreseen that more progress will be made in research and application of flocculation morphology in the near future.     

1270轧机弹性曲线的回归及参数估计

首先介绍了轧机弹性曲线的基础知识及 1 2 70轧机AGC系统的基本结构 ,然后论述了数据采集的方法 ,最后根据最小二乘法得到轧机弹性曲线的回归模型及刚度系数的实验结果。     

BP神经网络在液压试验台故障诊断中的应用

分析了BP神经网络的结构及算法，并对液压试验台的故障模式用BP神经网络来进行诊断，从而提出了一种新的解决液压试验台故障诊断的方法。     

基体碳对C/CF/Cu复合材料的影响

采用树脂碳化和碳气相沉积相结合的方法制备了碳/碳纤维(C/CF)先驱丝,用压力浸渗凝固成型方法制备了碳/碳纤维/铜(C/CF/Cu)复合材料,借助于扫描电镜下复合材料界面和相分布观察以及显微硬度和滑动摩擦磨损测试,探讨了基体碳(树脂碳化碳和沉积碳)对C/CF/Cu复合材料成型、显微硬度及摩擦磨损的影响.结果表明,碳化和碳气相沉积处理的C/CF先驱丝相对致密并阻碍铜液的压力浸渗成型,但该先驱丝硬度高于碳化处理的C/CF先驱丝.碳化和碳气相沉积处理的C/CF/Cu复合材料滑动摩擦磨损耐磨性高于纯铜,而且滑动摩擦系数也高于纯铜.C/CF/Cu复合材料是一种具有摩阻功能的复合材料.     

Thermodynamic Calculation of the Zirconia–Calcia System

An optimal thermodynamic data set for the zirconia–calcia system is evaluated by the CALPHAD (CALculation of PHAse Diagrams) method applied to experimental phase diagram and thermodynamic data. The liquid and C _ss (cubic ZrO₂ solid solution) are described by a subregular solution model. Three compounds, CaZr₄O₉, Ca₆Zr₁₉O₄₄, and CaZrO₃, are modeled as stoichiometric compounds. A regular solution model is applied to the other phases. Comparisons between calculated and measured phase diagrams and thermodynamic quantities show that most of experimental information is satisfactorily accounted for by thermodynamic calculations. The calculations also reasonably predict the measured electromotive force concerning the metastable C _ss.     

胺对镍系催化了二烯聚合规律的影响

以二乙胺为例研究了胺对Ｎｉ（ｎａｐｈ）２－Ａｌ（－Ｂｕ）３－ＢＦ３·ＯＥｔ２＋ｎ—Ｃ８Ｈ１７ＯＨ（简称Ｎｉ－Ａｌ－Ｂ＋ＲＯＨ）和Ｎｉ（ｎａｐｈ）２－Ａｌ（ｉ－Ｂｕ）３－ＢＦ３·ＯＥｔ２＋ＣＨ３ＣＯＯＣ４Ｈ９（简称Ｎｉ—Ａｌ—Ｂ＋ＢＡ）两体系聚合活性和聚合物分子量的影响，并与Ｎｉ—Ａｌ—Ｂ体系进行了对比．考察了通常条件下肢的允许含量，讨论了有胺存在时Ｎｉ／Ｂｄ、Ａｌ／Ｎｉ、Ａｌ／Ｂ摩尔比的变化对聚合规律的影响。结果表明：胺的含量高于２０ｐｐｍ时将使聚合活性和分子量降低，提高催化剂用量可以抑制胺的不利影响。     

Enhanced utilization bound of Rate-Monotonic scheduling in Controller Area Networks

When priorities to message streams are assigned using Rate Monotonic (RM) for a Controller Area Network (CAN), the utilization bound is known to be about 25% for CAN 2.0A and 29% for CAN 2.0B. In this letter, we present a higher utilization bound than the existing ones with a reasonable constraint. The new utilization bounds are approximately 34% for CAN 2.0A and 41% for CAN 2.0B if no single message stream's utilization exceeds 46% or 27% of the total utilization for CAN 2.0A or CAN 2.0B, respectively.     

破乳+Fenton试剂法处理高浓度废乳化液的研究

采用破乳-Fenton试剂法对机械厂磨床车间废乳化液进行处理(原水CODcr=290000mg／L，BOD5=28000mg／L)。结果表明：使用合适的破乳药剂，破乳后废水的CODcr去除率达到97．8％；之后投加适量的Fenton试剂进行氧化处理，最终出水CODcr为684mg／L；BOD5／COD由0．094增至0．47，可生化性大大提高。