Impact of finite laser linewidth on the performance of OFDMnetworks employing single-cavity Fabry-Perot demultiplexers

In this paper we investigate the impact of finite laser linewidths (i.e. source partial coherence) on the crosstalk performance of optical frequency division multiplexing (OFDM) networks employing single-cavity Fabry-Perot demultiplexers. Results are presented that show the important limitation imposed by the finite laser linewidths on the attainable bit error rate (BER), maximum number of users, and the required power penalties to overcome this impairment     

On the use of tapered linearly chirped gratings asdispersion-induced distortion equalizers in SCM systems

We report on the use of tapered linearly chirped fiber gratings to equalize dispersion-induced distortion in long distance/broad-band subcarrier multiplexed (SCM) systems. Different apodization functions for the coupling factor of the fiber grating have been considered and their equalizing capability of fiber-induced distortion in a subcarrier system have been compared. The results of the theoretical analysis show that both harmonic and intermodulation distortions are significantly reduced when the equalizer parameters have been properly designed. Higher reduction of the nonlinear distortion is obtained when the length of the filter increases, even though a saturation effect on this reduction figure appears when the equalizer length is about four or five times its minimum value to achieve equalization, which is derived theoretically based on the SCM optical system parameters. The performance of a Tanh-type tapered linearly chirped grating equalizer on a realistic broadband SCM system is also considered. The results reveal that the dispersion-induced distortion can be neglected when the equalizer is employed     

Nonlinear distortion generated by DSF-based optical-phase conjugators in analog optical systems

In this paper, the nonlinear distortion induced by dispersion-shifted-fiber-based optical-phase conjugators (OPCs) in intensity-modulated subcarrier multiplexing optical systems is evaluated. In this study, it is shown that the nonlinear distortion mainly arises from the four-wave mixing (FWM) process during the phase conjugation, although there also exists influences from other nonlinear effects. Closed expressions for calculating the second- and third-order harmonic distortions due to FWM, self-phase modulation, cross-phase modulation and group-velocity dispersion effects in the dispersion-shifted-fiber-based OPC are also reported for the first time. The influence of several system design parameters, such as the optical modulation index, the number of channels, the input optical powers, and the effective area of the dispersion-shifted fiber on the compensation of fiber-induced nonlinear distortions employing the optical-phase conjugation technique, is considered.     

Controlled-Release Matrix of Acetaminophen-Ethylcellulose Solid Dispersion

In this study ethylcellulose was evaluated as a carrier for preparation of prolonged release acetaminophen tablets. Solid dispersions containing three levels of ethylcellulose and acetaminophen (1:3; 1:1; 3:1) were prepared by the solvent method. Also physical mixtures at the same level of ethylcellulose and acetaminophen were prepared. Systems composed of solid dispersion or physical mixture containing the equivalent weight of 50 mg acetaminophen, Lactose fast-flo as diluent and 1% magnesium stearate as lubricant were compressed into tablets and tested for dissolution. The dissolution data showed that the drug release decreased as the level of ethylcellulose increased in the solid dispersion formulations. The drug release from tablets prepared with solid dispersion followed the diffusion controlled model for inert porous matrix, while the drug release from tablets prepared with physical mixture followed the first-order kinetic model.     

Optically generated electrical-modulation formats in digital-microwave link applications

We investigate a novel technique to generate the transmission signal in digital-microwave link applications. This technique is based on a photonic device that achieves both electrical modulation (QAM, PSK, ASK) and harmonic upconversion of the microwave carrier. Simulation results are provided for a seventh-harmonic 38.5-GHz transmission of a 2.5-Gbps signal through a 1-km fiber span. The impact of fiber chromatic-dispersion on the link bandwidth is also analyzed.     

Influence of Two Salicylate Components on the Particle Size of an Oil-in-Water Emulsion with Nonionic Surfactants

This paper reports a study undertaken using techniques of static and dynamic light scattering to investigate the influence of sodium salicylate and methyl salicylate on droplet size of oil-in-water emulsions. The rates of changes were measured by determining the size and distribution of the oil droplet in the material. All emulsions showed a bimodal size distribution; the mean diameters and polydispersity were calculated from intensity. These data were analyzed with nonlinear regressions and bootstrap methodology. An amount of methyl salicylate component induced a decrease of mean diameter and standard deviation. On the contrary, sodium salicylate entailed the growth of all droplet populations and coalescence for the highest concentration.     

Experimental results on adiabatic coupling into SOI photonic Crystal coupled-cavity waveguides

The experimental implementation of an adiabatic coupling technique for efficient coupling between photonic crystal single-line defect waveguides and coupled-cavity waveguides is reported. The samples were fabricated in a silicon-on-insulator substrate using 248-nm-deep ultraviolet lithography. Experimental results are compared with three-dimensional (3-D) finite-difference time-domain simulations. Furthermore, the discrepancies between two-dimensional and 3-D simulation results are analyzed.     

Semi-Supervised Deep Learning for Multi-Tissue Segmentation from Multi-Contrast MRI

Journal of Signal Processing Systems - Segmentation of thigh tissues (muscle, fat, inter-muscular adipose tissue (IMAT), bone, and bone marrow) from magnetic resonance imaging (MRI) scans is useful...     

Reversible suppression of the so-called fishtail effect in ultra pure single crystals of YBa2Cu3O7−δ achieved by proper oxygenation

We report on the absence of the so-called fishtail or peak effect in the magnetisation curves of properly oxygenated high purity (5N) single crystals of YBa₂Cu₃O_7–. As we recently reported [1] high pressure oxygenation procedures are suitable to produce a monotonous dependence of the critical current density with the magnetic field. In this article we report furthermore how to reversibly produce or remove this effect on the same crystal by proper oxygenation methods. Along with the high purity of the samples, — due to crystal growth in non reactive BaZrO₃ crucibles —, this proves that at least in pure samples the fishtail effect is due to different oxygenation states and/or oxygen distributions. In less pure samples, however, other sources for this anomaly like metallic impurities can act as an additional source for the fishtail anomaly.     

PETOOL: MATLAB-based one-way and two-way split-step parabolic equation tool for radiowave propagation over variable terrain

A MATLAB-based one-way and two-way split-step parabolic equation software tool (PETOOL) has been developed with a user-friendly graphical user interface (GUI) for the analysis and visualization of radio-wave propagation over variable terrain and through homogeneous and inhomogeneous atmosphere. The tool has a unique feature over existing one-way parabolic equation (PE)-based codes, because it utilizes the two-way split-step parabolic equation (SSPE) approach with wide-angle propagator, which is a recursive forward–backward algorithm to incorporate both forward and backward waves into the solution in the presence of variable terrain. First, the formulation of the classical one-way SSPE and the relatively-novel two-way SSPE is presented, with particular emphasis on their capabilities and the limitations. Next, the structure and the GUI capabilities of the PETOOL software tool are discussed in detail. The calibration of PETOOL is performed and demonstrated via analytical comparisons and/or representative canonical tests performed against the Geometric Optic (GO) + Uniform Theory of Diffraction (UTD). The tool can be used for research and/or educational purposes to investigate the effects of a variety of user-defined terrain and range-dependent refractivity profiles in electromagnetic wave propagation.

Program summary

Program title: PETOOL (Parabolic Equation Toolbox)Catalogue identifier: AEJS_v1_0Program summary URL:http://cpc.cs.qub.ac.uk/summaries/AEJS_v1_0.htmlProgram obtainable from: CPC Program Library, Queen?s University, Belfast, N. IrelandLicensing provisions: Standard CPC licence, http://cpc.cs.qub.ac.uk/licence/licence.htmlNo. of lines in distributed program, including test data, etc.: 143 349No. of bytes in distributed program, including test data, etc.: 23 280 251Distribution format: tar.gzProgramming language: MATLAB (MathWorks Inc.) 2010a. Partial Differential Toolbox and Curve Fitting Toolbox requiredComputer: PCOperating system: Windows XP and VistaClassification: 10Nature of problem: Simulation of radio-wave propagation over variable terrain on the Earth?s surface, and through homogeneous and inhomogeneous atmosphere.Solution method: The program implements one-way and two-way Split-Step Parabolic Equation (SSPE) algorithm, with wide-angle propagator. The SSPE is, in general, an initial-value problem starting from a reference range (typically from an antenna), and marching out in range by obtaining the field along the vertical direction at each range step, through the use of step-by-step Fourier transformations. The two-way algorithm incorporates the backward-propagating waves into the standard one-way SSPE by utilizing an iterative forward–backward scheme for modeling multipath effects over a staircase-approximated terrain.Unusual features: This is the first software package implementing a recursive forward–backward SSPE algorithm to account for the multipath effects during radio-wave propagation, and enabling the user to easily analyze and visualize the results of the two-way propagation with GUI capabilities.Running time: Problem dependent. Typically, it is about 1.5 ms (for conducting ground) and 4 ms (for lossy ground) per range step for a vertical field profile of vector length 1500, on Intel Core 2 Duo 1.6 GHz with 2 GB RAM under Windows Vista.