Sorption of Acid Green 25 on chitosan: Influence of experimental parameters on uptake kinetics and sorption isotherms

Acid Green 25, which is a diazoic dye bearing two sulfonic groups, is efficiently sorbed on chitosan. The protonation of chitosan may explain the electrostatic attraction of this anionic dye and that its optimum pH is close to 3. Preliminary protonation of amine groups (obtained by contact with a sulfuric acid solution) reduced the variation of solution pH following sorbent addition but significantly reduced sorption performance: the maximum sorption capacity of raw chitosan, 525 mg dye/g (0.84 mmol dye/g), was halved by acidic preconditioning. The acidic conditioning also reduced the kinetic rate—the time necessary to reach equilibrium increased up to threefold depending on the experimental conditions. The size of sorbent particles influenced sorption kinetics and equilibrium because of resistance to intraparticle diffusion, but the sorption appeared to occur not only at the surface of the sorbent but also in the intraparticle network of the polymer. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 90: 1073–1080, 2003     

Furnace grown gate oxynitride using nitric oxide (NO)

Gate oxynitride was grown in NO for the first time. This approach can provide a tight N accumulation near the Si/SiO₂ interface. Much lower thermal budget is required for an NO process than for an N₂O process to produce an oxynitride with useful properties. Submicron MOSFET's with NO oxynitride showed superior current drive characteristics and comparable hot carrier immunity to those with N₂O oxynitride     

Multifactorial assessment of bulimia nervosa.

Investigated a multifactorial approach to the assessment of bulimia nervosa by means of hierarchical factor analysis. 245 bulimia nervosa patients and 68 patients with either anorexia nervosa or eating disorders not otherwise specified were administered a self-report battery that was organized into 21 dimensions relevant to eating disorder patients. When dimensions from this battery were subjected to hierarchical factor analysis, support for bulimia nervosa as a unique diagnostic category was obtained. However, the emergence of 3 secondary factors and 6 primary factors suggests that bulimia nervosa can also be described more complexly. The emergence of a multifactorial model of bulimia nervosa that incorporates several existing unidimensional models suggests the potential for both divergent and complicated clinical presentation in bulimia nervosa patients. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Melanin Distribution in Human Skin: Influence of Cytoskeletal,Polarity, and Centrosome-Related Machinery of Stratum basale Keratinocytes

Melanin granules cluster within supra-nuclear caps in basal keratinocytes (KCs) of the human epidermis, where they protect KC genomic DNA against ultraviolet radiation (UVR) damage. While much is known about melanogenesis in melanocytes (MCs) and a moderate amount about melanin transfer from MC to KC, we know little about the fate of melanin once inside KCs. We recently reported that melanin fate in progenitor KCs is regulated by rare asymmetric organelle movement during mitosis. Here, we explore the role of actin, microtubules, and centrosome-associated machinery in distributing melanin within KCs. Short-term cultures of human skin explants were treated with cytochalasin-B and nocodazole to target actin filaments and microtubules, respectively. Treatment effects on melanin distribution were assessed by the Warthin–Starry stain, on centrosome-associated proteins by immunofluorescence microscopy, and on co-localisation with melanin granules by brightfield microscopy. Cytochalasin-B treatment disassembled supra-nuclear melanin caps, while nocodazole treatment moved melanin from the apical to basal KC domain. Centrosome and centriolar satellite-associated proteins showed a high degree of co-localisation with melanin. Thus, once melanin granules are transferred to KCs, their preferred apical distribution appears to be facilitated by coordinated movement of centrosomes and centriolar satellites. This mechanism may control melanin’s strategic position within UVR-exposed KCs.     

Experimental investigation of the self- and N(2)-broadened continuum within the ν(2) band of water vapor

We present an experimental study of the self- and N(2)-broadened H(2) O continuum in microwindows within the ν(2) fundamental centered at ~1600 cm(-1). The continuum is derived from transmission spectra recorded at room temperature with a BOMEM Fourier transform spectrometer at a resolution of ~0.040 cm(-1). Although we find general agreement with previous studies, our results suggest that there is significant near-wing super-Lorentzian behavior that produces a highly wave-number-dependent structure in the continuum as it is currently defined.     

Radial Basis Function Interpolation on Irregular Domain through Conformal Transplantation

In this paper, Radial Basis Function (RBF) method for interpolating two dimensional functions with localized features defined on irregular domain is presented. RBF points located inside the domain and on its boundary are chosen such that they are the image of conformally mapped points on concentric circles on a unit disk. On the disk, a fast RBF solver to compute RBF coefficients developed by Karageorghis et al. (Appl. Numer. Math. 57(3):304–319, 2007) is used. Approximation values at desired points in the domain can be computed through the process of conformal transplantation. Some numerical experiments are given in a style of a tutorial and MATLAB code that solves RBF coefficients using up to 100,000 RBF points is provided.     

Dynamic Network User Equilibrium with State-Dependent Time Lags

This paper recasts the Friesz et al. (1993) measure theoretic model of dynamic network user equibrium as a controlled variational inequality problem involving Riemann integrals. This restatement is done to make the model and its foundations accessible to a wider audience by removing the need to have a background in functional analysis. Our exposition is dependent on previously unavailable necessary conditions for optimal control problems with state-dependent time lags. These necessary conditions, derived in an Appendix, are employed to show that a particular variational inequality control problem has solutions that are dynamic network user equilibria. Our analysis also shows that use of proper flow propagation constraints obviates the need to explicitly employ the arc exit time functions that have complicated numerical implementations of the Friesz et al. (1993) model heretofore. We close by describing the computational implications of numerically determining dynamic user equilibria from formulations based on state-dependent time lags.     

Traction Characteristics of Siloxanes with Aryl and Cyclohexyl Branches

The molecular structures, rheological properties, and friction coefficients of several new siloxane-based polymers were studied to explore their traction characteristics. The molecular structures including branch content were established by nuclear magnetic resonance spectroscopy, while the molecular mass distributions were determined by gel permeation chromatography. Density, viscosity, elastohydrodynamic film formation, and friction were investigated over a temperature range of 303–398 K. Film thickness and friction measurements were studied under the conditions that are representative of boundary, mixed, and full-film lubrication regimes, aiming at maximizing traction performance and temperature stability by simultaneous optimization of the size and content of ring-shaped branch structures. This study provides quantitative insight into the effect of siloxane molecular structure on the tribological performance for traction drive applications such as continuously variable transmissions.     

Exploring quadrilaterals in a small group computing environment

Though cooperative learning has been a topic of considerable interest in educational research, there has been little study specific to learning in the mathematics content area of geometry. This paper seeks to address that gap through a design experiment featuring a novel small-group computing environment for supporting student learning about quadrilaterals. In this design, each student controls a unique point in a shared geometric space, and those points are linked such that a group of four students collectively forms a quadrilateral. We first present results from pre- and post-measures to show how the students learned from the activities and developed in terms of geometric reasoning. We then present three episodes, elaborated with the notion of appropriation, to explain how students took up ways of using the technological tools and of talking about geometric concepts from one another in the interactive environment. Our study found that students achieved learning gains in this novel environment, that the environment provided rich opportunities for peer interaction around geometric objects, and that student learning opportunities and interactions were characterized by processes of appropriating ways of talking about and using software features.     

A 2 MV Van de Graaff accelerator as a tool for planetary and impact physics research

Investigating the dynamical and physical properties of cosmic dust can reveal a great deal of information about both the dust and its many sources. Over recent years, several spacecraft (e.g., Cassini, Stardust, Galileo, and Ulysses) have successfully characterised interstellar, interplanetary, and circumplanetary dust using a variety of techniques, including in situ analyses and sample return. Charge, mass, and velocity measurements of the dust are performed either directly (induced charge signals) or indirectly (mass and velocity from impact ionisation signals or crater morphology) and constrain the dynamical parameters of the dust grains. Dust compositional information may be obtained via either time-of-flight mass spectrometry of the impact plasma or direct sample return. The accurate and reliable interpretation of collected spacecraft data requires a comprehensive programme of terrestrial instrument calibration. This process involves accelerating suitable solar system analogue dust particles to hypervelocity speeds in the laboratory, an activity performed at the Max Planck Institut fu?r Kernphysik in Heidelberg, Germany. Here, a 2 MV Van de Graaff accelerator electrostatically accelerates charged micron and submicron-sized dust particles to speeds up to 80 km s(-1). Recent advances in dust production and processing have allowed solar system analogue dust particles (silicates and other minerals) to be coated with a thin conductive shell, enabling them to be charged and accelerated. Refinements and upgrades to the beam line instrumentation and electronics now allow for the reliable selection of particles at velocities of 1-80 km s(-1) and with diameters of between 0.05 μm and 5 μm. This ability to select particles for subsequent impact studies based on their charges, masses, or velocities is provided by a particle selection unit (PSU). The PSU contains a field programmable gate array, capable of monitoring in real time the particles' speeds and charges, and is controlled remotely by a custom, platform independent, software package. The new control instrumentation and electronics, together with the wide range of accelerable particle types, allow the controlled investigation of hypervelocity impact phenomena across a hitherto unobtainable range of impact parameters.