Transient aspects of inner wall temperatures at different spatial positions in fluidized bed evaporators

In this work, the instantaneous data of inner wall temperatures obtained at given axial positions but for different heated tubes or at various axial positions but at the same heated tube in a tube-bank fluidized bed evaporator with a vapor–liquid–solid external natural circulation flow were analyzed by employing linear and nonlinear time series analysis methods, including correlation dimension and Kolmogorov entropy analyses besides time domain, power spectrum and autocorrelation analyses. It is found that nonlinear characteristics of the wall temperature time series vary with spatial position in the evaporator at given operation conditions, and thus the multi-phase flow boiling behavior. However, the signals obtained at given axial position but different heated tubes in the evaporator exhibit more similar nonlinear evolution behavior, and those measured in the same heated tube but at different axial heights in the evaporator undergo more distinct nonlinear dynamic behavior. Multi-scale phenomena in different spatial positions are also found and discussed. These transient aspects of inner wall temperatures are closely related to the average holdup of solid particles and motion of vapor bubbles in vapor–liquid–solid flow. These results can provide some valuable information on the system modeling and controlling from the point of view of nonlinearity.     

Effects of chemical and plasma surface treatments on the O2-annealed Ni/Au contact to p-Gan

The effects of boiling Aqua Regia (AQ), N₂/Cl₂ plasma followed by AQ and O₂ plasma followed by AQ surface treatments prior to Ni/Au (20 nm/20 nm) metallization to p-GaN:Mg (∼ 3 × 10¹⁷ cm^− 3) have been investigated. N₂/Cl₂ plasma was employed in a bid to lower the Ga/N and O/Ga ratios of the GaN surface to improve the contact properties to p-GaN, while O₂ plasma was employed as an alternative to incorporate O into the Ni/Au system. Results show that a low Ga/N ratio does not necessarily correspond to a better contact. The positive effect of O₂ over N₂ anneal is observed only for the AQ-treated sample, although the mechanisms responsible for its positive effect: NiO formation and Ni/Au layer-reversal were observed for all O₂-annealed contacts. We conclude that the effect of O₂ anneal on the Ni/Au contact is dependant on the p-GaN surface prior to metallization.     

数据处理系统性能评价的简单理论模型

提出了一个简单的理论模型．旨在为数据处理系统的性能评价提出一个理论框架．以此框架为基础，可形成实用的简单评估方法．该模型只含两个参数，它们是统计量，可用统计方法确定．     

Tree-based partitioning of date for association rule mining

The most computationally demanding aspect of Association Rule Mining is the identification and counting of support of the frequent sets of items that occur together sufficiently often to be the basis of potentially interesting rules. The task increases in difficulty with the scale of the data and also with its density. The greatest challenge is posed by data that is too large to be contained in primary memory, especially when high data density and/or low support thresholds give rise to very large numbers of candidates that must be counted. In this paper, we consider strategies for partitioning the data to deal effectively with such cases. We describe a partitioning approach which organises the data into tree structures that can be processed independently. We present experimental results that show the method scales well for increasing dimensions of data and performs significantly better than alternatives, especially when dealing with dense data and low support thresholds. Shakil Ahmed received a first class BSc (Hons) degree from Dhaka University, Bangladesh, in 1990; and an MSc (first class), also Dhaka University, in 1992. He received his PhD from The University of Liverpool, UK, in 2005. From 2000 onwards he is a member of the Data Mining Group at the Department of Computer Science of the University of Liverpool, UK. His research interests include data mining, Association Rule Mining and pattern recognition. Frans Coenen has been working in the field of Data Mining for many years and has written widely on the subject. He received his PhD from Liverpool Polytechnic in 1989, after which he took up a post as a RA within the Department of Computer Science at the University of Liverpool. In 1997, he took up a lecturing post within the same department. His current Data Mining research interests include Association rule Mining, Classification algorithms and text mining. He is on the programme committee for ICDM'05 and was the chair for the UK KDD symposium (UKKDD'05). Paul Leng is professor of e-Learning at the University of Liverpool and director of the e-Learning Unit, which is responsible for overseeing the University's online degree programmes, leading to degrees of MSc in IT and MBA. Along with e-Learning, his main research interests are in Data Mining, especially in methods of discovering Association Rules. In collaboration with Frans Coenen, he has developed efficient new algorithms for finding frequent sets and is exploring applications in text mining and classification.     

ELEVATED TEMPERATURE FRACTURE OF PARTICULATE-REINFORCED ALUMINUM PART I: FRACTURE TOUGHNESS

Abstract—The plane-strain initiation and growth fracture toughnesses of powder-metallurgy-processed, SiC particulate-reinforced 2009 plate were measured at temperatures from 25°C to 316°C. Initiation toughness from electrical potential monitoring ( K _JICi) is 18 MPa°m at 25°C, and is nearly constant to 220°C before decreasing sharply to 6 MPa°m at 316°C. Growth toughness, given by the tearing modulus ( T _R), is less than 3 from 25°C to 125°C, and increases dramatically above 200°C. The magnitude and temperature dependence of initiation toughness depend on detection of the critical fracture event. Standard measures of toughness K _IC and K _JIC exceed K _JICi and increase to a plateau with increasing temperature. The fracture mode for the composite is microvoid nucleation, growth and coalescence at all temperatures. Void nucleation is associated with SiC; such particles both crack and create stress and plastic strain concentrations that rupture the interface or adjacent matrix, particularly at corners. Matrix plasticity and cavitation increase with increasing temperature. Void growth is regular at all temperatures, but limited by adjacent SiC particles. Both K _JICi and T _R are governed by the temperature-dependent crack-tip plastic stress and strain fields, and the intrinsic damage resistance of the composite microstructure.     

Industrial TiO2 based nacreous pigments as functional building materials: Photocatalytic removal of NO

In this paper, the photocatalytic activity of industrial titanium dioxide (TiO₂) based nacreous pigments was researched as functional building materials for photocatalytic NO remove. Three industrial TiO₂ based nacreous pigments were selected to estimate the photocatalytic activity for NO remove. This study is a good proof that pearlescent pigments can eliminate NO, and its performance is positively correlated with its titanium dioxide content. And this research will widen the application of nacreous pigments in functional building materials, and provide a new way to eliminate in door nitric oxide pollution.     

聚天冬氨酸的合成与表征

以L-天冬氨酸为原料,热缩合成聚天冬氨酸酐,水解得到聚天冬氨酸。采用凝胶色谱法(GPC)测定了聚天冬氨酸的分子量,并用核磁共振(NMR)对其进行了表征。     

深圳市抛石填海区物探方法研究

在深圳某抛石填海区,由于存在较厚的淤泥层,而且在淤泥层中大量的分布着大小不均的石块,在物探作业的时候,往往难以探测到淤泥下面的基岩面,本文基于以上情况,通过对几种常规的物探方法的对比,从理论到实践,从中找到了最优的勘探方法,为以后从事此类工程的物探工作者提供一些借鉴。     

黄麦岭磷矿矿石工艺矿相学研究

经红外光谱测试及单矿物化学分析，确定了磷灰石的种类；通过显微镜观察，系统地研究了不同自然类型磷矿石中磷灰石的嵌布嵌镶关系；利用线测法测定了磷灰石的嵌布粒度；采用一粗一精一扫浮选流程，按原来的浮选条件和药剂制度所得精矿，研究了其单体解离度及选矿回收率；提出了改进选矿工艺流程的可能途径和方法。