Contributions of the interior and surface states of charge carriers to the emission spectra of CdS quantum dots in borosilicate glasses

The photoluminescence spectra of CdS quantum dots grown in a borosilicate glass by sol-gel technology are recorded and analyzed. It is shown that the photoluminescence spectra of the samples are related to annihilation of free (interior) excitons in the ground state and excited state. Emission associated with the surface states of the quantum dots is detected in the region around 2.7 eV for the first time. The emission is due to recombination of electrons localized at the surface with heavy holes in the free states of the quantum dots. Resonance excitation of the structures makes it possible to reveal the specific features of the localized surface states responsible for the photoluminescence band. The properties of the band are, to a large extent, similar to the properties of the emission bands of both three-dimensional media (amorphous semiconductors and substitution alloys) and two-dimensional systems (quantum wells and superlattices).     

Zr对Cu—Zn—Al形状记忆合金相变的影响

采用示差扫描热分析(DSC)、X射线衍射及透射电镜,研究了Zr对Cu-Zn-Al合金高温相变、马氏体正逆转变以及形状记忆效应的影响。结果表明,添加Zr0.35wt-％时,能有效地抑制α,γ相析出,促进β_2→DO_3→18RM转变。(M_s-M_f)及(A_s-A_f)温度区间较窄,马氏体相变激活能最低,马氏体变体间界面的可动性好,形状记忆效应最佳。     

纯铜动态再结晶的Monte Carlo法模拟

本文建立了一种基于能量判据的确定动态再结晶各个阶段临界应变的方法，并基于此种方法Monte Carlo(MC)法进行了纯铜动态再结晶的二维模拟，定量计算了变形引起的存储能与变形之间的关系，计算出了发生动态再结晶的临界应变。模拟结果表明，采用MC法可以揭示动态再结晶的形核生长过程与应变历史之间的关系。结合本文所建立的基于能量判据的确定动态再结晶各个阶段临界应变的方法，可以预测开始发生动态再结晶的临界变形条件。     

SiCp/2024铝基复合材料的超塑性变形行为研究

对经过热处理和冷轧后的体积分数为17％，尺寸为3．5μm的SiC颗粒增强2024铝合金薄板在753－853K范围内进行了超塑性实验研究. 结果在813K时以10^-1/S的变形速率下获得了259％的最大延伸率，最大应力敏感系数为0．25复合材料的变形激活能值在753－793K范围内为144kJ/mol，在813－853K内为202kJ/mol，接近纯铝的晶格扩散激活能值142kJ/mol。复合材料的变形机制主要为基体晶粒滑动机制。     

APPLICATION OF MOLECULAR ORBITAL THEORY TO ANALYSIS OF PHASE STABILITY FOR ALLOYS

The critical _d vahues ( _ ) of the γ/(γ+σ).γ/(γ+μ) and γ/(γ+γ') phase boundaries insome ternar alloy phase diagrams at various temperatures are calculated by averaging the _d values of sererai selected characteristic points at the phase boundaries.Approxmateequations for the temperature dependence of the critical _d of γ/(γ+σ).γ/(γ+μ) andγ/(γ+γ') phase boundaries are established.The accuracy of the analysis is discussed in detail.It is found for the first time that the average value of the bondorder _ at the phase boundaries ts also approximatelr a constant and therefore a criticalaverage bond order _ like - can be introduced for the analysts of phase stability     

BEHAVIOR OF Mg AND ITS EFFECT ON MECHANICAL PROPERTIES OF CAST Fe_3Al ALLOYS

Proper addition of 0.002 wt-% Mg to cast Fe_3Al alloy may obviously improve the room andhigh temperature tensile properties.Auger spectra show that Mg segregates near grainboundaries as very thin layers.Observation under TEM reveals that a suitable amount of Mgenhances ability of cooperative internal deformation so that the dislocations will ease the con-tinuous slip deformation through grain boundaries.The fracture feature of Fe_3Al alloy is oftransgranular cleavage at room temperature and cracks initiate at grain boundaries.     

Ti-Al基合金中的Hall-Petch关系及影响因素分析

研究了全层片状组织Ti-Al基合金的室温拉伸性能与品团尺寸的关系。Ti-Al基合金的室温拉伸屈服强度和断裂强度与晶团尺寸成Hall-Petch关系。当合金中添加替代元素Cr和Nb时，其Hall-Petch斜率不变；而添加间隙元素C和B时，其Hall-Petch斜率增加。Ti-Al基合金的室温延伸率与晶团尺寸不满足Hall-Petch关系。     

稀土与二（2,4,4—三甲基戊基）膦酸固体配合物的研究

合成了除Pm以外的16个稀土与二(2,4,4-三甲基戊基)膦酸(HBTMPP)的固体配合物,其组成为RE(BTMPP)_3,对配合物的性质进行了表征,热分析表明,在氩气中,热分解是一步完成的,在空气中,热分解分二步完成,前者的热分解产物是RE_4 (P_2O_7)_3,后者的产物为RE_2P_4O_(13)测定了配合物的振动光谱,对其主要吸收谱带进行了归属,配合物中RE-O键具有较高的离子特性     

高碳Cr—Mo—W钢M／B复相组织疲劳行为研究

用紧凑拉伸试样测定了65Cr5Mo3W2VSiTi(LM2)钢不同贝氏体量和不同回火温度的M/B复相组织的疲劳裂纹扩展速率,根据试验数据估算了各工艺的疲劳门槛值。结果表明,LM2钢M/B复相组织的疲劳裂纹扩展属非连续扩展机制,疲劳裂纹微观扩展速率的计算值和宏观扩展速率的实测值相近     

镍基单晶合金枝晶典型区域相成分最优化测算法

建立了用于测算镍基单晶高温合金枝晶典型区域相成分的最优化数学模型.根据电子探针对枝晶典型区域成分的测定结果,运用BFGS拟Newton法及CONSTR约束优化算法,可以计算枝晶各典型区域中γ和γ＇相成分.以镍基单晶合金CMSX-2和CMSX-4为对象,对优化测算结果进行了分析,证实了该方法的可行性.